Grinding Jars for Mixer Mill MM 400
With screw cap.Simple and safe handlingDust and air-tightSuitable for wet and cryogenic grinding
Grinding Jars for Mixer Mill MM 500
With screw capScrew-Lock jars in sizes up to 125 ml, pressure-tight up to 5 bar
Grinding jars for planetary ball mill BM40
Grinding jars made of stainless steel, agate, sintered aluminium oxide, zirconium oxide and tungsten carbide have a stainless steel casing for safety reasons.
Grinding mill, A 10 basic
Newly designed batch mill for grinding of hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. During development of the mill, particular emphasis was placed on safety. The mill will only start when the lid is closed and it can only be opened at standstill. A quick stop feature further increases the safety of user.Digital timerCounter: Display of grinding timeInterval operationBrushless motor for long life and low noiseIntegrated cooling connectionsError Code DisplayEasy handling with keypadsEasy exchangeable beater/cutter for a variety of applicationsGrinding chamber reduction for small sample amounts ( included with delivery)Easy opening and closing of the lid with a bayonet lock
Grinding mill, A11 basic
Batch mill for 2 different grinding procedures:Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a cutting blade (not incl. with delivery).Moist and gluey materials can be pulverized by adding waterGrinding chamber made of Tefcel (PTFE, glass fibre-reinforced) with stainless steel inlet (1.4571), useful volume 80ml (incl. with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamberOptionally, a 250ml grinding chamber is availableAccessories please order separately.
Grinding set for mortar grinder PULVERISETTE 2
Mortars and pestles are also available in sintered corundum hardmetal tungsten carbide and zirconium oxide.
High Energy Ball Mill Emax
The Emax is an entirely new type of ball mill for high energy milling for medium-hard, hard, brittle and fibrous materials. The combination of high friction and impact results in extremely fine particles within the shortest amount of time. Thanks to the cooling system with water, the high energy input is effectively used for the grinding process without overheating the sample. The Emax is capable of continuous grinding operation without interruptions for cooling down. The high energy input in combination with the unique cooling system provides perfect conditions for effective mechanical alloying or grinding down to the nanometer range.Speed of 2000 rpm allows for ultra-fast and fine pulverization of the sampleControlled water cooling allows for continuous operation without cool down breaksTemperature-controlled grindingNarrow particle size distribution thanks to special jar design which improves mixing of the sample10 combinations of grinding parameters storableOperation with 2 grinding jars with integrated safety closureRange of jar materials allow for contamination free grindingAccessories on request.
Jaw Crusher, BB 50
Benchtop Jaw Crusher for the rapid and gentle, coarse and preliminary size reduction of hard, brittle and ductile materials. Continuous digital gap width adjustment with scale, enhanced ultimate fineness up to 0.5 mm.Large fold-back hopperRemovable crusher arm for easy cleaningAdjustable speed allows adaptation to sample characteristicsConvenient operating keypad with digital displayMemory for gap width settingWear compensation with zero-point adjustmentThroughput/charge: single items, charges to 3000 ml
Jaw Crushers BB
For rapid and gentle coarse grinding and crushing of hard, brittle and tough materials. Continuous gap adjustment with scale and zero-point adjustment for wear compensation. Excellent performance with enhanced final fineness, robust construction, fitted with quick-release hopper, receiver with safety switch and casing. Standard model is supplied with manganese steel breaking jaws.High throughputContinuous gap width adjustmentBraking motor with safety switchEasy cleaning of grinding chamber
Jaw crushers PULVERISETTE 1 classic line
Ideal for fast batchwise or continuous pre-crushing of very hard to medium-hard, brittle and tough materials in the areas of mining and metallurgy, chemistry, geology and mineralogy, glass industry, ceramics industry, rocks and soils. The final fineness can be easily set from the outside (10 different stages are possible).Scope of supply: Jaw crusher, crushing jaws, support walls made of tempered steel.Crushers are also available in other voltages and with crushing jaws and lateral support walls made of stainless steel, chromium-free steel, hardmetal, tungsten carbide, zirconium oxide and manganese steel.The Jaw Crushers PULVERISETTE 1 are also available as premium line models with increased performance, even easier to operate and fast cleaning.
Knife mill HM100
The HM100 knife mill is used for grinding soft, medium-hard, brittle and fibrous materials. Especially suitable for samples with a high water, oil or fat content. The 2 knives are driven by a 900 W motor to achieve a reliable grinding result. Suitable for applications in agriculture, biology, medicine and food technology.For soft, elastic, fibrous, aqueous, oily or fatty samplesElectronically controlled speedSamples are grinded in only 10 to 30 secondsUp to 700 ml sample volumeAutoclavable grinding vesselsGrinding vessels available in various materialsCutting knives with 2 stainless steel and titanium blades availableEasy operationQuick startCoarse and fine grinding in one stepInterval, reverse and manual mode availableScope of supply: Knife mill, 1 l grinding vessel made of plastic (autoclavable), lid, stainless steel knife
Knife mill PULVERISETTE 11
For reproducible homogenisation of all common samples in food or feed testing, pharmaceuticals, chemicals and many other applications. The quietly operating knife mill is ideal for gentle grinding and homogenisation of moisty, oily and greasy as well as dry, soft, medium-hard and fibrous samples within seconds.Motor power up to 1250 WattVariable speed setting with turbo functionStandard, reverse and interval operationKnife blades with 4 cutting edges, up to 56000 cuts per minuteFeed quantity up to 1400 ml (depending on material)Average grinding time only 30 seconds (depending on material)Fast cryogenic grinding20 SOPs can be stored, USB interface for SOP management and generation of grinding reportsEasy cleaningSample-contacting parts such as grinding containers, lids and knives can be autoclavedScope of supply: Knife mill, grinding container 1.4 l made of polycarbonate, standard lid, standard knife made of stainless steel
Knife Mills GRINDOMIX GM 200
The Knife Mills are suitable for the rapid and reproducible size reduction and homogenisation of food and feed materials. They can process substances with a high water, oil or fat content just as quickly and reliably as dry, soft and medium-hard products.Very fast and reproducible grinding and homogenisation of foodstuffsSpeed-controlled industrial motorAutoclavable grinding toolsBoost function allows short-term increase of speed up to 14000 rpmDigital display of grinding time and speedInterval operation possibleOptional gravity lid for automatic adjustment of grinding chamber volumeStorage of 4 program sequences possible8 parameter combinations can be storedScope of supply: knife mill, 1 l plastic container, standard lid, stainless steel knife
Knife Mills GRINDOMIX GM 300
The knife mills are suitable for the rapid and reproducible size reduction and homogenisation of food and feed materials. They can process substances with a high water, oil or fat content just as quickly and reliably as dry, soft and medium-hard products.Very fast and reproducible grinding and homogenisation of foodstuffsSpeed-controlled industrial motorAutoclavable grinding toolsDigital display of grinding time and speedInterval operation possibleOptional gravity lid for automatic adjustment of grinding chamber volume10 parameter combinations can be stored Scope of supply: knife mill, 5 l plastic container, standard lid, stainless steel knife, scraper
Laboratory blender MemoryBlender2
The Laboratory Memory Blender 2 is a compact programmable commercial blender, driven by a high power ventilator cooled motor. The high-quality construction and the electronically controlled speed cycles guarantee a maximum performance. The microprocessor based controller features 6 push buttons with 12 optimized pre-programmed cycles which are suitable for most applications. Using the built-in "Memory" function, these cycles can be replaced with individual programs with different time and speed settings. Even the speed of the "Pulse" function can be changed. It's possible to disable the "Memory" function, to prevent unwanted overwriting. The blender can also be operated in a manual mode with 6 fixed speeds. The easy to understand LEDs show the state of the controller.The high performance programmable commercial silent blender.12 programmable cycles for automatic processing6 fixed speeds in manual modeVery quiet, space saving, solid and elegantPolished stainless steelEasy cleaningSafety features:By opening the plastic cover the motor stops immediatelyA protective switch prevents the motor from overloading and overheatingRugged main switchThe blender conforms to the international IEC standardsPlease order mixing containers separately.Before starting each operation the durability and resistance of all blender materials, e. g. glass, CNS, PP, rubber have to be checked concerning their tolerance against the substances to process.
Laboratory Blender Waring® 800 EG, with glass container
Versatile laboratory mixer ideally suited for general laboratory work. One velocity setting (22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styreneScope of supply: Mixer, container with handle and lid
Laboratory Blender Waring® 800 ES, with stainless steel container
Versatile laboratory mixer ideally suited for general laboratory work.One velocity setting (22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styreneScope of supply: Mixer, container with handle and lid
Laboratory Blender Waring® 8010
Versatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.With mechanical timer (3 minutes)Two velocity settings (18000 or 22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styreneScope of supply: Mixer, container with handle and lid
Laboratory Blender Waring® 8011
Versatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.Two velocity settings (18000 or 22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styreneScope of supply: Mixer, container with handle and lid
Laboratory Blender Waring®LB20 EG/ES
Versatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.Variable velocity settings (500 or 22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styrene Scope of supply: Mixer, container (stainless steel or glass) with handle and lid