Digital refractometer RFM700
Robust, fully automated measuring device with °Brix scale and automatic temperature compensation to 20 °C in accordance with ICUMSA for demanding applications in the food, sugar, and beverage industries. The refractometer can be connected to a printer or laboratory PC and output measurement results in standard print, CSV, or secure PDF formats.Additional user scales allow measurement in various formats (e.g. RI, Öchsle, Baumé)Integrated library for user scalesAG temperature equalisation enables range calibration for AG solutionsBright, high-resolution 4" HD colour displayTwo display modes (red or colour)Alphanumeric keypad"Hands-free" auto-sense measurementTime-delayed measurementFlat prism surface facilitates cleaningWide beam scan for non-homogeneous samplesUSB (A), USB (B), and Ethernet interface
Digital refractometer RFM900-T series
Digital refractometer with a large measuring range and Peltier temperature control for applications in the chemical, petrochemical, and pharmaceutical industries, as well as flavour and perfume production. SMART temperature stability, RFID user identification, and application-specific, pre-programmed methods simplify routine analyses.Flat prism tray and contactless prism lid facilitate sample application and cleaningHigh-resolution 6 decimal places7" high-resolution HD touchscreen displayUSB (A), USB (B), and Ethernet interfaceUS/EP/BP/JP compliantSupports FDA Regulation 21 CFR Part 11PHR-MEAN and ASTM D 2140 methods
Digital refractometer RFM990-AUS32
Digital refractometer with Peltier temperature control was specially designed to meet the strict requirements of the chemical industry. The refractometer is equipped with specific urea scales, temperature compensation, and an AUS32 method that enables the input of both the F-factor and the biuret content of the solution. SMART temperature stability, RFID user identification, and application-specific, pre-programmed methods simplify routine analyses.Version for the petrochemical industryFlat prism tray and contactless prism lid facilitate sample application and cleaning7" high-resolution HD touchscreen displayUSB (A), USB (B), and Ethernet interfaceUS/EP/BP/JP compliantSupports FDA Regulation 21 CFR Part 11PHR-MEAN and ASTM D 2140 methodsConforms to ISO 22241Compliance with ISO procedures relating to the production of diesel exhaust fluids
Digital Refractometer RX-5000Alpha/RX-5000Alpha Plus/RX-9000Alpha
The digital refractometers are reliable and cost effective instruments with a measurement accuracy of ±0.03 % Brix and ±0,00004 nD. An excellent alternative to traditional Abbe refractometers and essential to any QC / QA lab. Equipped with 60 programmable user scales and 4 level password protection feature.RX-5000 Alpha and RX-5000Alpha Plus are equipped with a Peltier thermo module. RX-5000Alpha Plus has the highest accuracy of the RX series. All refractometers can be connected with an optional printer.
Digital Refractometer RX-5000i / RX-5000i-Plus
The most accurate refractometer in the world is now even more stylish, smart, and functional. Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze. The RX-5000i measures with the same accuracy level as the RX-5000alpha ±0.03% Brix and ±0.00004nD. The RX-5000i-Plus measures with the same accuracy level as the RX-5000alpha-Plus ±0.010% Brix and ±0.00002nD. The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability. These products come standard with a 2 year warranty. The warranty period can be extended to 3 years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard DeliveryModes:Displays the measurement value once the sample reaches the target temperatureMeasures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperatureThe thermo-module can be turned off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressedDisplays the measurement value once a certain level of sample stability is achieved.Only on the RX-5000i-Plus: Measuring of Low Brix Liquid Samples (such as teas), obtaining highly repeatable results (0.010% Brix).
Digital refractometer, UG-1Alpha
Digital display of the automatically temperature-compensated result. Battery powered, splashproof. For measuring the density of urine.
Digital Refractometer/Polarimeter RePo
All-in-One refractometer and polarimeter hybrid unit. Only 3 ml sample is needed. With the press of a button, purity, international sugar scale, specific rotation and concentration can be displayed. Users can also set an upper and lower measurement limit. An indicator light alerts the user if a measurement value is within the limits.RePo-1: can measure both brix and optical rotation of the sample.RePo-2: As RePo-1, additionally the RePo-2 also determines and displays the amount of fructose (%) within HFCS. The RePo-2 is ideal for various industries such as food and beverage, or sugar refining.RePo-3: As RePo-1, additionally the RePo-3 also determines and displays the amount of invert sugar (%) derived from sucrose. The RePo-3 is ideal for various industries such as sugar refining.RePo-4: As RePo-1, additionally the RePo-4 also determines and displays the amount of fructose (%) and honey moisture (%). The RePo-4 is ideal for total quality control of honey.RePo-5: As RePo-1, additionally the RePo-5 can also display the refractive index (nD) of a sample. The RePo-5 is ideal for quality control in various industries such as fragrances, cosmetics, or pharmaceutical.
Digital Refractometer/Polarimeter RePo-1 Package
All-in-One refractometer and polarimeter hybrid unit. Only 3 ml sample is needed. With the press of a button, purity, international sugar scale, specific rotation and concentration can be displayed. Users can also set an upper and lower measurement limit. An indicator light alerts the user if a measurement value is within the limits.RePo-1 can measure both brix and optical rotation of the sample.Package includes: Main unit, 100 ml beaker, 50 x Syringe Filters orange 45, 3 x 20 ml Syringes, 100 x Easy filter
Digital refractometers
Type PR-32αCan be used to measure fruit juices, soft drinks, diluted soluble oils, aqueous cleaning solutions, etc.Type PR-101αApplications include measuring fruit juices, lemonade, coffee, diluted soluble oils and anti-freeze solutions.Type PR-201αIt can be used for accurately measuring jams, concetrated fruit juices, coolants and similar products.Type PR-301αEspecially suited to measuring jellies, liquid cane sugar,etc.Type PET-109This model is used for simply determining the concentration of ethyl alcohol, which is used in foods and for cleaning, cooling and other purposes.Type PR-RIA new Refractive Index model has been added to the popular long-selling "Palette Series". It is suitable for measuring the refractive indices of liquid samples in pharmaceutical and chemical products. Ambient temperature: 10 to 40°C.All models are with data transmission via near field communication (NFC).
Digital refractometers DR7000 series
With these digital refractometers, the measurement is based on the determination of the limiting angle of total reflection between a sample and a prism, measured at a wavelength of 589 nm. Suitable for small sample volumes of approx. 0.3 ml. With optical sensor, temperature control, measuring electronics, evaluation electronics and touch display, the devices contain all the components needed to carry out the measurements reliably. Operation takes place directly on the device, so that a separate PC with software is not necessary.Internal Peltier temperature control and integrated sensor for temperature monitoringPre-installed scales (refractive index and %Brix, temperature compensation for %Brix)Functions allowing the customer to create and edit further measurands and temperature compensationsUp to three measurands can be measured simultaneouslyInternal memory for storing measurement results1-point adjustment by the customerActivatable user management with three user levelsChemical-resistant stainless steel traySample prism made from scratch-resistant, chemical-resistant sapphireInterfaces: 2 x USB, 1 x RS-232, 1 x LANWith these digital refractometers, the measurement is based on the determination of the limiting angle of total reflection between a sample and a prism, measured at a wavelength of 589 nm. Suitable for small sample volumes of approx. 0.3 ml. With optical sensor, temperature control, measuring electronics, evaluation electronics and touch display, the devices contain all the components needed to carry out the measurements reliably. Operation takes place directly on the device, so that a separate PC with software is not necessary.Internal Peltier temperature control and integrated sensor for temperature monitoringPre-installed scales (refractive index and %Brix, temperature compensation for %Brix)Functions allowing the customer to create and edit further measurands and temperature compensationsUp to three measurands can be measured simultaneouslyInternal memory for storing measurement results1-point adjustment by the customerActivatable user management with three user levelsChemical-resistant stainless steel traySample prism made from scratch-resistant, chemical-resistant sapphireInterfaces: 2 x USB, 1 x RS-232, 1 x LAN
Digital refractometers DR7000 series, with audit trail function
With these digital refractometers, the measurement is based on the determination of the limiting angle of total reflection between a sample and a prism, measured at a wavelength of 589 nm. Suitable for small sample volumes of approx. 0.3 ml. With optical sensor, temperature control, measuring electronics, evaluation electronics and touch display, the devices contain all the components needed to carry out the measurements reliably. Operation takes place directly on the device, so that a separate PC with software is not necessary.Internal Peltier temperature control and integrated sensor for temperature monitoringPre-installed scales (refractive index and %Brix, temperature compensation for %Brix)Functions allowing the customer to create and edit further measurands and temperature compensationsUp to three measurands can be measured simultaneouslyInternal memory for storing measurement results1-point adjustment by the customerActivatable user management with three user levelsChemical-resistant stainless steel traySample prism made from scratch-resistant, chemical-resistant sapphireInterfaces: 2 x USB, 1 x RS-232, 1 x LANCompliant with CFR 21 Part 11
Digital refractometers ORM
Accurate and maintenance free digital handheld refractometers for universal application.Large display with integrated temperature readingAutomatic temperature compensation (ATC)Automatic power-off after 60 secondsProtected against dust and splash water (IP 65)Scope of supply: Refractometer, prism cover lid, pipette, storage box, 1 × AAA battery, user manual
Digital Wi-Fi stereo microscope SMZ-171iX
The SMZ-171iX is a digital microscope with Wi-Fi functionality and an integrated 4 MP camera, designed for applications in biomedicine and materials science. With the free MotiConnect app, the microscope can be connected wirelessly to tablets or smartphones, allowing live images to be shared with up to six users simultaneously. The stereo microscope is also compatible with computers and can be used with Motic Images Plus software. The Greenough optical system delivers sharp, clear images with a zoom range of 6.7:1. Five click-stops in the smooth zoom mechanism enable precise magnification reproduction.LED illumination with intensity controlWidefield eyepieces 10X/23 with diopter adjustmentLarge field of view and 110 mm working distanceCoarse focusing system with tension adjustmentEthernet interface
Digital Wine Refractometer, Type WM-7
The WM-7 is a digital pocket wine refractometer with 7 scales, developed for the simple, rapid and precise measurement of grape must.Measuring ranges: Brix, T.A., Oe, KMW, Baumé
Disposable cuvettes, macro
Cuvettes for spectrophotometry applications in the visible spectrum. The production technology and quality control ensure the reproducibility of the cuvettes. The absorption changes are kept within the ±1 % interval, an important condition for analyses in series.Cuvettes for spectrophotometry applications in the visible spectrum. The production technology and quality control ensure the reproducibility of the cuvettes. The absorption changes are kept within the ±1 % interval, an important condition for analyses in series.
Disposable cuvettes, semi-micro
Cuvettes for spectrophotometry applications in the visible spectrum. The production technology and quality control ensure the reproducibility of the cuvettes. The absorption changes are kept within the ±1 % interval, an important condition for analyses in series.Cuvettes for spectrophotometry applications in the visible spectrum. The production technology and quality control ensure the reproducibility of the cuvettes. The absorption changes are kept within the ±1 % interval, an important condition for analyses in series.
Disposable cuvettes, standard, 4 clear faces
Cuvettes for spectrophotometry applications in the visible spectrum. The production technology and quality control ensure the reproducibility of the cuvettes. The absorption changes are kept within the ±1 % interval, an important condition for analyses in series.Cuvettes for spectrophotometry applications in the visible spectrum. The production technology and quality control ensure the reproducibility of the cuvettes. The absorption changes are kept within the ±1 % interval, an important condition for analyses in series.
Disposable Staining Slide Tray
Stain, rinse, and dry your slides on a single working tray. Made of a polypropylene and polyethylene blend, this rugged staining tray is an economical alternative to metal versions offering a clean and fresh working surface area every time. Up to eight slides fit comfortably onto the base and the deep well holds liquid waste up to 38ml. Two convenient pour spouts make it easy to dispose of unwanted liquid waste. Unique dark lid protects slides when used with light sensitive applications.Supplied with 4 Base Trays and 1 Lid.
Drying pads
The strips remove excess liquids on microscope slides and thus dry quickly, cleanly and easily stained specimens for microscopy. 1 block = 50 strips.
Drying pads grade 556
Absorbent paper strips for the removal of excess liquids, e.g., from microscope specimens (100 x 50 sheets).
Dual fiber illuminations
These dimmable illumination units provide good quality light with constant intensity on the object.Illumination 6 W LEDColourtemperature 5600 - 6300 K
Economy Counters
Mechanical, benchtop counters are ideal for determining the number of cells, counting parts, etc. Use with blood cell labels provided or insert your own. Each key records up to 999 count strokes. A totalising window keeps track of the total number of strokes made on all keys; a bell rings at every 100 total counts reached.
Educational microscopes RED 211
For applications in schools, universities and laboratories.Depending on the model, 1 or 2 widefield eyepieces WF10X/18 mmReversed quadruple revolving nosepieceAchromatic Semi-Plan objectives SP 4X, 10X, 40XCoaxial coarse and fine focusing systemBuilt-in low position coaxial mechanical stageMonocular head 30°, 360° rotatingAbbe condenser N.A. 1.25 with iris diaphragmLED illumination 3 W with intensity controlScope of supply:Microscope, dust cover