Multiparameter meter Portavo 907 Multi Cond
€0.00
Product information "Multiparameter meter Portavo 907 Multi Cond"
Comprehensive data logger
The following logging types can be selected:
- Manual logging
- Time-controlled logging at a fixed interval
- Signal-controlled logging of measured value and temperature
- Combined time and signal-controlled logging
- Threshold-controlled logging with pre-trigger
The data logger for up to 10000 entries records point of measurement, annotation, sensor ID, sensor serial number (Memosens), primary value, temperature, time stamp, and device status.
User-friendly software
Portavo 907 proves that a high level of functionality and easy use are not mutually exclusive. It proceeds step by step through the calibration procedure. Technical terms are clearly explained in the context-sensitive help.
- High-resolution colour graphic display
- Transflective and sunlight readable
- Li-ion rechargeable battery
- Micro USB port and Paraly SW 112 software
- A sensor quiver protects the sensor from damage and drying out
- The high-performance polymer housing ensures low water absorption and high impact resistance
- Intelligent data logger with 10000 entries and graphical representation
- Memosens sensors and analogue sensors can be used on one device
- The mineral glass display is perfectly readable even after years
| Battery/rechargeable battery: | 4 x AA |
|---|---|
| Conductivity: | 0.01 ... 200 µS/cm (SE 202, analogue), 1 µS/cm ... 500 mS/cm (SE 204, analogue), 0.1 µS x cm ... 200 mS x cm (2-electrode sensors, analogue), 0.1 µS x cm ... 1000 mS x cm (4-electrode sensors, analogue), 10 µS/cm ... 20 mS/cm (SE 615/1-MS, Memosens) |
| Depth: | 156 mm |
| Designation ANSI: | AA |
| Dimensions (WxDxH): | 132 x 156 x 30 mm |
| Height: | 30 mm |
| IP code: | IP 66 |
| Interfaces: | USB |
| Manufacturer Article Number: | 907 MULTI COND |
| Max. pH value: | 16 |
| Min. pH value: | -2 |
| No. of batteries/rechargeable batteries: | 4 |
| Partial pressure: | 0 ... 2000 mbar (Memosens) |
| Salinity: | 0 ... 45 g/kg |
| Saturation: | 0 ... 1000 % (Memosens) |
| TDS range: | 0 ... 1999 mg/l |
| Temperature: | -20 ... 120 °C (NTC 30 kOhm)/-40 ... 250 °C (Pt1000)/-50 ... 250 °C (Memosens) |
| Type: | 907 Multi Cond |
| Type of auxiliary energy: | Battery/rechargeable battery |
| Warranty: | 3 years |
| Weight: | 500 g |
| Width: | 132 mm |
| mV range: | -2000 ... 2000 (Memosens) |
| pH range: | -2 ... 16 |
Login
Other customers also bought
Portable multiparameter meter for digital pH/ORP, conductivity and oxygen sensors (Memosens), as well as an interface for analogue pH/ORP sensors. The powerful Li-ion rechargeable battery can be charged in the device via USB. The clear network diagram provides an at-a-glance view of the sensor condition.Comprehensive data loggerThe following logging types can be selected:Manual loggingTime-controlled logging at a fixed intervalSignal-controlled logging of measured value and temperatureCombined time and signal-controlled loggingThreshold-controlled logging with pre-triggerThe data logger for up to 10000 entries records point of measurement, annotation, sensor ID, sensor serial number (Memosens), primary value, temperature, time stamp, and device status.User-friendly softwarePortavo 907 proves that a high level of functionality and easy use are not mutually exclusive. It proceeds step by step through the calibration procedure. Technical terms are clearly explained in the context-sensitive help.High-resolution colour graphic displayTransflective and sunlight readableLi-ion rechargeable batteryMicro USB port and Paraly SW 112 softwareA sensor quiver protects the sensor from damage and drying outThe high-performance polymer housing ensures low water absorption and high impact resistanceIntelligent data logger with 10000 entries and graphical representationMemosens sensors and analog pH sensors can be used on one device (e.g. flat-membrane sensors)The mineral glass display is perfectly readable even after years