Check flasks, DAkkS calibrated, boro 3.3, class A, with 3 marks, blue graduations
BLAUBRAND®, DIN EN ISO 1042. Calibrated to contain (TC, IN). DAkkS (former DKD) certificate included. The volumetric flask with 3 marks is used to check the functioning of a dispenser. The mark in the middle shows the nominal volume, the upper and lower marks show the error limits as specified in the table below. If the error limit is exceeded even with repeated measurements, the dispenser is defective. The DAkkS-calibrated volumetric flask does not replace the gravimetric test of the monitoring of measuring instruments according to ISO 8655.Other sizes on demand.
Flasks, volumetric, PMP (TPX)
With stoppers.No meniscusCalibrated gravimetrically at 20 °CChemically non-absorbentNon wetting surfaceThick walls eliminate distortionFood-safeAutoclavable to 170 °C
Flasks, volumetric, PP
With stoppersNo meniscusCalibrated gravimetrically at 20 °CChemically non-absorbentNon wetting surfaceThick walls eliminate distortionFood-safeAutoclavable
Graduated cylinders, PMP, Class A, tall form
Highly transparent. DE-M marked. With red printed scale and ring marks at the primary scale points, calibrated "In".The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With printed batch number and the year of production. Hexagonal base with bottom studs provides high stability. To preserve markings, do not clean at temperatures exceeding 60 °C. Thus, conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving we recommend the design with raised graduations. Also available with DAkkS calibration certificate or individual quality certificate.
Graduated cylinders, PP, class B, embossed scale
Tall form, with spout, high clarity. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions. Food-safe, autoclavable.
Graduated cylinders, PP, class B, low form, raised scale
Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Products individually packaged in PE bags, labelled with the article number, description and EAN code. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Graduated cylinders, PP, embossed scale
Low form. High clarity. Calibrated to contain (TD, In). Exposure to temperatures up to 80 °C will not cause tolerance limits to be exceeded!
Graduated cylinders, PP, tall form, class B, embossed scale
Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)
Graduated cylinders, PP, tall form, class B, embossed scale
Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)
Graduated cylinders, SAN, class B, embossed scale
Low form. Calibrated to contain (TD, In). Exposure to temperatures up to 80°C will not cause accuracy to exceed tolerance limits!
LLG-Measuring cylinders, borosilicate glass 3.3, low form, class B
Low form. Calibrated to contain (TC, IN).DIN EN ISO 4788With hexagonal base and spoutAmber graduation
LLG-Measuring cylinders, borosilicate glass 3.3, tall form, class A
Tall form. Conformity certified with batch ID.DIN EN ISO 4788With hexagonal base and spoutBlue graduation
LLG-Measuring cylinders, borosilicate glass 3.3, tall form, class B
Tall form.Detachable hexagonal baseWith spout and protection collarWhite graduation
LLG-Mixing cylinders, borosilicate glass 3.3, tall form, class A
Tall form. Conformity certified with batch ID.DIN EN ISO 4788With hexagonal base and PE stopperBlue graduation
LLG-Volumetric flasks, borosilicate glass 3.3, class A
Conformity certified with batch ID.DIN EN ISO 1042With standard ground joint and PE stopperBlue ring mark and inscription
LLG-Volumetric flasks, borosilicate glass 3.3, class A, amber glass
Conformity certified with batch ID.DIN EN ISO 1042With standard ground joint and PE stopperWhite ring mark and inscription
LLG-Volumetric trapezoidal flasks, borosilicate glass 3.3, class A
Trapezoidal shape. Conformity certified with batch ID.DIN EN ISO 1042With standard ground joint and PE stopperBlue ring mark and inscription
Measuring Cylinder for Determination of Stamping Volume
Acc. to DIN EN ISO 4788. Class B, blue graduated.
Measuring cylinder with plastic socket, DURAN®, class A, blue graduation
With spout, removable plastic socket and protective ring. Blue graduation marks, calibrated for IN, acc. to DIN EN ISO 4788.
Measuring Cylinder with Plastic Socket, DURAN®, class B, Blue Graduation
With spout, removable plastic socket and protective ring, graduation marks, calibrated for IN, DIN EN ISO 4788.
Measuring Cylinder, DURAN®, class A, Blue Graduation
Schellbach stripe for enhanced legibility and exact meniscus configuration, acc. to DIN EN ISO 4788. Calibrated for IN.Certified conformityWith dated batch identificationMain point ring graduationWith spoutHexagonal glass socketAdditional batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com.
Measuring Cylinder, DURAN®, class A, Blue Graduation, USP
According to USP error limits.With dated batch identificationMain point ring graduationAdditional USP batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com
Measuring cylinders DURAN®, low form, class B, white graduations
Calibrated to contain INWith spout and hexagonal baseShort lineDIN EN ISO 4788