Measuring cylinders, DURAN®, tall form, class B, amber stain graduation
IN (TC) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. With durable amber stain graduation, DIN EN ISO 4788.
Measuring cylinders, DURAN®, tall form, class B, blue graduation
IN (TD) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.
Measuring cylinders, PMP, class A, KB
Tall form. Highly transparent. DE-M marked. Ring marks at the major graduation points. The conformity certified cylinders are delivered with a batch certificate which includes batch number and the actual determined nominal capacity with indications of the test conditions. Batch number and year of fabrication is printed on each cylinder. The concluding deviations to the nominal capacity are clearly within the required tolerances of class A acc. to DIN 12681 and ISO 6706. Measuring cylinders made of PMP withstand exposure to temperatures up to 121°C (autoclaving) without permanent loss of tolerance. On request also with DAKKS calibration certificate or single certificate.
Measuring cylinders, PMP, Class B, blue graduations
Tall form, with spout, transparent. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 121°C (autoclaving) will not cause tolerance limits to be permanently exceeded! Cleaning temperature below 60°C is recommended to preserve graduations and inscriptions. Food-safe.
Measuring cylinders, PMP, tall form, class A, blue graduations
Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60 °C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier's website.DIN 12681 and ISO 6706DE-M markingWith blue printed graduations and inscriptions
Measuring cylinders, PMP, tall form, class A, blue graduations
Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60 °C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier's website.DIN 12681 and ISO 6706DE-M markingWith blue printed graduations and inscriptions
Measuring cylinders, PMP, tall form, class A, blue graduations, with DAkkS calibration certificate
Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60°C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate or USP individual certificate. Batch and individual certificates can also be downloaded at the supplier's website.DIN 12681 and ISO 6706DE-M markingWith blue printed graduations and inscriptions
Measuring cylinders, PMP, tall form, class A, blue graduations, with individual certificate
Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60°C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier's website.DIN 12681 and ISO 6706DE-M markingWith blue printed graduations and inscriptions
Measuring cylinders, PMP, tall form, class B, white graduations
Clear. Conforms to ISO 6706 - 1981 (E).Good chemical resistanceFor liquids up to 170 °CPentagon baseFood-safeAutoclavable
Measuring Cylinders, PP, Short Form, Moulded Graduations
Low form, circular base. Excellent chemical resistance. Moulded graduation. Wide base for high stability. Food-safe, autoclavable.
Measuring cylinders, PP, tall form, class B, blue graduated
DIN 12 681 and ISO 6706. Calibrated to contain (IN). Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.
Measuring cylinders, PP, tall form, class B, blue graduated
Tall form, highly transparent, with blue graduations, hexagonal base, calibrated to contain (IN). Tolerances class B according to DIN 12681 / ISO 6706. Exposure to temperatures above 60 °C may effect accuracy. Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.
Measuring cylinders, PP, tall form, class B, blue moulded graduations
Highly transparent. With easily readable, raised, embossed blue scale and ring marks at the primary scale points. Calibrated 'In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. To preserve markings, do not clean at temperatures exceeding 60ºC.Food-safe product according to regulation (EU) No. 10/2011.
Measuring Cylinders, PP, Tall Form, Class B, Moulded Graduations
Conforms to ISO 6706 - 1981 (E), high transparency. Autoclavable at 121 °C for 20 min., permanently heat resistant up to 100 °C. Durable, moulded graduation. Inner surface with very low wettability, therefore no meniscus formation. Food safe.
Measuring cylinders, PP, tall form, class B, moulded graduations
Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.They offer high transperency, chemical resistance and remarkable heat tolerance.They meet the highest quality standards according to DIN 12681 and ISO 6706.Individually calibrated through automatic calibration process carried out by robots.Permanent quality control through all steps eliminate possible deviations from nominal values.Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class "B" standards.Graduations are embossed and specially designed for plastic and resistant to 60°C.For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60°C and should not be kept under direct sunlight or overheated conditions.
Measuring cylinders, PP, tall form, class B, moulded graduations
Tall form. Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Measuring cylinders, PP, with handle, moulded graduations
The large handle provides a secure grip for safer, more controlled and convenient pouring. A double scale is accurate and easy to read. The wide hexagonal base prevents tip over and rolling on the benchtop. One litre and two litre sizes.Autoclavable at 121°C
Measuring cylinders, SAN, low form, class B, moulded graduations
Short form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Measuring cylinders, SAN, tall form, class B, moulded graduations
Tall form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Class B tolerances according to DIN 12681/ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.