Pipette controller RF1000
Manual pipette controller that is uniquely designed for one-handed operation. Simply squeeze the main bulb and push the toggle forward to aspirate or back to dispense. Push the blowout bulb to expel any liquid remaining in the pipette. Ergonomic handle.Replaceable tapered silicone rubber pipette adapter allows a large range of pipette sizes ranging 1 to 100 mlWith replaceable 0.45 µm hydrophobic filter to protect samples and internal componentsAutoclavable nose cone assembly
Pipette controller VITLAB pipeo®
For all pipettes from 0.1 to 200 ml.Ergonomic handle, very light weight of ca. 190 gSpeed can be adjusted easily, continuously and exactly with one hand using 2 buttonsA 50 ml pipette can be filled in less than 10 secondsLiquid release can be done either by gravity delivery when calibrated ''Ex'' (to deliver), or in blow out mode using the battery-operated motorNickel-metal hydride battery allows approx. 8 hours of non-stop pipettingCharge level of the rechargeable battery is shown by the LED indicator (changes from green to red two hours before the battery must be recharged)Scope of supply: Pipette controller incl. battery charger (100-240 V, 50/60 Hz), 4 plug adapters (EU, UK, US/J, AUS), battery, battery compartment cover, two replacement 0.2 µm membrane filters and instruction manual
Pipette controller, pipetus® junior
Low cost, manual pipetting aid (no mains connection). Simple, safe and accurate. For all commercially available volumetric and graduated pipettes from 0.1 to 200 ml. Weighing only 130g, it ensures comfortable, ergonomic and problem-free pipetting. Each time the 'pump' button is pressed approximately 2 ml of sample fluid is drawn up. When the 'out' button is pressed the liquid is gently released via an accurate valve system with the amount of pressure exerted on the Blow-out button determining the speed of release. Blow-out pipettes can be fully emptied by pressing another button on the back of the unit. A standard PTFE membrane filter prevents overfilling.Supplied with: pipetus® junior with 2 round PTFE filters, sterile
Pipette controller, Profiller™ manual 437
For glass and plastic pipettes with a volume up to 100 ml.With large suction ballSoft action lever buttonEfficient blow-out systemPTFE protection membrane filter, exchangableAlternative colour-coded cones (white, blue, green)
Pipette controllers macro 0.1 to 200 ml
One single macro pipette controller covers the entire range of bulb and graduated pipettes from 0.1 to 200 ml.The conical silicone adapter offers a secure fit for the different diameters. The unique valve system allows for easy compression of the bellows. The spring loaded lever enables an even more sensitive filling and delivery of liquids. The meniscus is easily adjustable. The unit is fully autoclavable at 121 °C (2 bar) according to DIN EN 285. A hydrophobic membrane filter protects the system from liquid penetration.Scope of supply: pipette controller, 3 µm spare membrane filter
Pipette Filler, pipetus®
The pipetus® is ergonomically sophisticated in every detail despite most modern technology, powerful and light-weight. Fits graduated, volumetric and Pasteur pipettes from 0.1 ml to 200 ml. Without reloading it can be operated up to one week. The colour display shows the selected defaults (speed) and the current battery capacityAutomatic inductive charge in the park station guarantees constant readiness Controlled pipetting by a simple push of a button EX/Blow out switch for precise operating Speed key for 5 operating speeds No memory effect by inserted microcontroller Clear colour display with permanent display Optimal meniscus adjustment by sensitive valve technique Standard relief valve against penetration of liquid Ergonomic design for fatigue-free serial pipetting Power supply 100-240 V, with EU, UK, US plugsSupplied with:pipetus®complete with mains operated charging unit and inductive charging stand, color display with battery level indicator, 2 additional round PTFE filters, additional safety valve and wall mount.
Pipette Fillers Profiller™ 447
Electronic pipette filler which allows longer and fatigue-free pipetting due to comfortable hand adjustment. Shape is ideal for working with glass or plastic pipettes. A powerful, quiet motor and a switch to set both aspiration and dispensing speeds enable maximal working efficiency even with large pipetting volumes.Powerful pump (fills 25 mL in 3 seconds)Comfortable finger triggersLow battery lightNiMH battery rechargeable during useInterchangeable protection membrane filterScope of delivery: Pipette filler Profiller™ 447, power supply, four plug adaptors (EU, US/JP, GB, AUS/NZ), two spare hydrophobic filters (0.45 µm and 0.2 µm), bench and wall stands and instruction manual.
Pipette Fillers S1
A lightweight, wireless pipette filler that allows longer and fatigue-free pipetting. For use with graduated and volumetric serological pipettes made of glass or plastic. Separate control of aspirating and dispensing speeds allows precise control of pipetting speeds and reduces the risk of overpipetting for smaller pipettes and volumes.Separate switches for aspiration and dispensingLarge backlit LCD display with indication of remaining battery life and speed settings8 speed levelsQuick charge function (fully charged after 3 hours)Individual labelling fieldSuitable for wall mounting or table standWith pipette adapter for the use of 1 ml pipettesScope of delivery: S1 pipette filler, universal charger, table stand, holder for wall mounting, 1 ml pipette tray, operating instructions and warranty card
Pipetting Aid Vitlab maneus®
Easy and fatigue-free operation for both left and right-handed usersA specially designed inlet cone accommodates pipettes from 0.1 ml to 200 mlThe perfectly balanced valve unit ensures effortless liquid aspirationPrecise and high sensitive meniscus settingA replaceable, hydrophobic membrane filter protects the interior from penetrating liquids Completely autoclavableWith 3 µm membrane filter and manual
Universal Safety Pipette Bulb
Red rubber and silicone pipette bulb for pipettes up to 25 ml.