Syringe Pump Legato® 110
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsSingle Syringe Infusion/Withdraw Pump. The Legato® 110 is based on the Legato® 100. It offers infuse/withdraw flow control and programmability for up to two multi-step programs of 50 steps each. This pump is ideal for more complex multi-step dosing and has multi-mode operation.
Syringe Pump Legato® 110DRS
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual syringe pump combination. Two Legato® 110 pumps connected by an input/output cable. Both pumps can be started synchronously and operated at different flow rates. The Legato® 110 is based on the Legato® 100. It offers infuse/withdraw flow control and programmability for up to two multi-step programs of 50 steps each. This pump is ideal for more complex multi-step dosing and has multi-mode operation.
Syringe Pump Legato® 111
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Nanoliter Pump. Based on the Legato® 101 model, suitable for infusion and withdrawal of liquids. Includes multi-mode operations and multi-step programs.
Syringe pump Legato® 130
The Legato® 130 Nanoliter pump is ideal for stereotaxic and micro manipulator devices. The Legato® 130 is an infuse/withdraw single syringe pump. It works with micro syringes from 0.5 to 1000 µl. Any type of syringe can be used including glass and plastic. It has a remote pump head which can be placed close to the experiment to eliminate dead volume with long tubing. The remote pump head is ideal for use with a micromanipulator, stereotaxic and other clamping devices. Syringe size and flow rates are easily displayed as well as the volume delivered and the elapsed time. A wide dynamic flow range from picoliters per minute to milliliters per minute can be programmed into the pump.Remote pump headLarge colour touchscreen display2 programs with 50 steps eachIcon driven softwareUSB, RS-232and RS485 interfacePrecise and smooth flow
Syringe Pump Legato® 180
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Picoliter Infusion/Withdraw Pump. For low flow with program options for 2 programs. 50 steps each. User definable flow rates with selectable target volume or time values to control the total infusion volume.
Syringe Pump Legato® 185
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsSingle Syringe Infusion/Withdraw Pump. It offers infuse/withdraw flow control and programmability for up to two multi-step programs of 50 steps each. This pump is ideal for more complex multi-step dosing and has multi-mode operation. Minimum flow rate only 0.54 pl/min.
Syringe Pump Legato® 200
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Infusion Pump. This unit supports infuse only. User definable flow rates with selectable target volumes or time values to control the total infusion volume.
Syringe Pump Legato® 210
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Infusion/Withdraw Pump. This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes.
Syringe Pump Legato® 270P
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Push/Pull Syringe Pump. This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes. Features additional user defined configurations/programs of up to 800 steps. Up to 40 programs of 20 steps each step can be stored in memory.
Syringe Pumps Legacy®
Economical Single-Syringe Infusion Pump combining precision flow with outstanding ease-of-use and exceptional durability.For single syringes from 10 µl to 60 ml, any manufacturerSimple menu-driven setup (select syringe size from displayed table, set dispense volume and flow rate)Easy to read bright, backlight displayDispense volume displayed and has automatic shutoff at completionVolume and flow rate units (µl/h or ml/h) are selected automatically based on syringe sizeLast settings stored in permanent memoryButton release of drive nut for easy syringe installationChoice of run/stop after a power interruption
Tubing for Luer Lock Hub Tubing Assemblies, 500 mm
Assemblies and TubingsHamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.Further tubing lengths available on request.
Tubing Versilic®, Silicone, 1 m
Versilic® 60 shore tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50 °C and maintains its chemical, mechanical and electrical performance up to 200 °C. Versilic® meets the European Pharmacopoeia requirements for silicone elastomer for closures and tubing, USP Class VI biological tests and ISO 10993 biocompatibility (systemic toxicity, irritation, sensitization, citotoxicity, hemocompatibility and Ames test).Versilic® 60 shore tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50 °C and maintains its chemical, mechanical and electrical performance up to 200 °C. Versilic® meets the European Pharmacopoeia requirements for silicone elastomer for closures and tubing, USP Class VI biological tests and ISO 10993 biocompatibility (systemic toxicity, irritation, sensitization, citotoxicity, hemocompatibility and Ames test).