Filter tips, HDPE
Pipette tips with special filters, to effectively prevent the inner pipettor shaft from contamination with aerosols and liquids to be drawn into the pipettor.SterileFree of DNA, DNase, pyrogens and ATPPipette tips and aerosol filters made of ultra-hydrophobic HDPEMinimized retention due to special surface treatmentPerfect and close fit on all major pipettor brandsPacked in plastic racks with hinge lidsaeroject® ultra (1770010, 1771000XL) with extended length for operation with narrow vessels and reduced risk of cross-contamination.A: all pipettes, ratiopetta®B: Gilson PIPETMAN® ClassicC: Gilson PIPETMAN® UltraD: Gilson PIPETMAN® NeoE: Thermo-Scientific Finnpipette® F1 / F2F: BioHit® ProlineG: BioHit® MlineH: Brand Transferpette® SI: Brand Transferpette® electronicJ: Eppendorf Reference®K: Eppendorf Reference® 2L: Eppendorf Research®M: Eppendorf Research® plusN: Socorex Acura® manual 825O: Socorex Acura® manual 835P: Socorex Acura® manual XSQ: Socorex Calibra® digital 822R: Socorex Calibra® digital 832S: Dr. Lange®T: Oxford®
Filter tips, PP
The pipette tips are produced in clean room and are compatible with most popular brands of pipettors.SterileDNase-, RNase- and pyrogen freeGraduated
Filter tips, racked in TipBox, PP, non-sterile
Pipette tips and filter tips are manufactured under monitored cleanroom conditions and are automatically packaged. No parting agents or demolding aids are used. Palletised tips and filter tips up to 1250 μl are free of DNA, DNAse, RNase, endotoxins and ATP.The filter tips have a PE filter, which is free from chemical additives. Permeability is controlled by the combination of pore size and filter length, so that no aerosols can reach the pipette shaft.With hinged lid/ snap-on lid (simply rotate by 180°) Working with multi-channel pipettes that are not fully loadedStackableRaw materials are free from DiHEMDA und OleamidThey are tested for BRAND pipettes and many pipettes from other manufacturersAutoclavable at 121 °C (2 bar), acc. DIN EN 285
Filter tips, racked in TipBox, sterile, Bio-Cert®
Pipette tips and filter tips are manufactured under monitored cleanroom conditions and are automatically packaged. No parting agents or demolding aids are used. Palletised tips and filter tips up to 1250 μl are free of DNA, DNAse, RNase, endotoxins and ATP.The filter tips have a PE filter, which is free from chemical additives. Permeability is controlled by the combination of pore size and filter length, so that no aerosols can reach the pipette shaft.With hinged lid/ snap-on lid (simply rotate by 180°) Working with multi-channel pipettes that are not fully loadedStackableRaw materials are free from DiHEMDA und OleamidSterile tips are manufactured under certified BIO-CERT® quality and are sterilised with beta radiationThey are tested for BRAND pipettes and many pipettes from other manufacturersAutoclavable at 121 °C (2 bar), acc. DIN EN 285
Filter tips, racked in TipRack, non-sterile
Pipette tips and filter tips are manufactured under monitored cleanroom conditions and are automatically packaged. No parting agents or demolding aids are used. Palletised tips and filter tips up to 1250 μl are free of DNA, DNAse, RNase, endotoxins and ATP.The filter tips have a PE filter, which is free from chemical additives. Permeability is controlled by the combination of pore size and filter length, so that no aerosols can reach the pipette shaft.Refill unit for TipBoxRaw materials are free from DiHEMDA und OleamidThey are tested for BRAND pipettes and many pipettes from other manufacturersAutoclavable at 121 °C (2 bar), acc. DIN EN 285
Filter tips, racked in TipRack, sterile, BIO-CERT®
Pipette tips and filter tips are manufactured under monitored cleanroom conditions and are automatically packaged. No parting agents or demolding aids are used. Palletised tips and filter tips up to 1250 μl are free of DNA, DNAse, RNase, endotoxins and ATP.Filter tips have a PE filter, which is free from chemical additives. Permeability is controlled by the combination of pore size and filter length, so that no aerosols can reach the pipette shaft.Refill unit for TipBoxRaw materials are free from DiHEMDA und OleamidSterile tips are manufactured under certified BIO-CERT® quality and are sterilised with beta radiationThey are tested for BRAND pipettes and many pipettes from other manufacturersAutoclavable at 121 °C (2 bar), acc. DIN EN 285
Filter tips, sterile, extra long
Transparent pipette tips with filter.DNase-, RNase- and pyrogen-freeGraduated
Finnpipette™ F1 GLP Kit
includes everything you need for "Good Laboratory pipetting"!Ergonomic pipettesConvenient pipette standsCompatible Thermo Scientific Finntip Flex tipsDisposable reservoirs + Finntip Sample PackF-series pen + product brochureGood Laboratory Pipetting GuideThermo Scientific Finnpipette™ F1 GLP kits include the Finnpipette™ F1 and everything you need for first class pipetting. All Finnpipette™ F1 GLP kits are a complete system for pipetting and offer all the advantages of a F1 pipette, including an adjustable fingertip for maximum ease of use, adjustable volume adjustment and an antimicrobial surface.Finnpipette™ F1 GLP Kit 1: incl. 1-10 / 10-100 / 100-1000 µl pipettes, 1x pipette standFinnpipette™ F1 GLP Kit 2: incl. 0.2-2 / 2-20 / 20-200 / 100-1000 µl pipettes, 1x pipette standFinnpipette™ F1 GLP Kit 3: incl. 10-100 µl / 100-1000 µl / 1-10 ml pipettes, 1x pipette standFinnpipette™ F1 GLP Kit 4: incl. 2-20 / 20-200 / 100-1000 µl pipettes, 1x pipette stand
Flasks, volumetric, PMP (TPX)
With stoppers.No meniscusCalibrated gravimetrically at 20 °CChemically non-absorbentNon wetting surfaceThick walls eliminate distortionFood-safeAutoclavable to 170 °C
Flasks, volumetric, PP
With stoppersNo meniscusCalibrated gravimetrically at 20 °CChemically non-absorbentNon wetting surfaceThick walls eliminate distortionFood-safeAutoclavable
Gas syringes, FORTUNA®, soda lime glass
Clear glass, with calibrated cylinder.With chemically-resistant, diffused amber stain graduations.
Graduated cylinders, PMP, Class A, tall form
Highly transparent. DE-M marked. With red printed scale and ring marks at the primary scale points, calibrated "In".The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With printed batch number and the year of production. Hexagonal base with bottom studs provides high stability. To preserve markings, do not clean at temperatures exceeding 60 °C. Thus, conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving we recommend the design with raised graduations. Also available with DAkkS calibration certificate or individual quality certificate.
Graduated cylinders, PP, class B, embossed scale
Tall form, with spout, high clarity. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions. Food-safe, autoclavable.
Graduated cylinders, PP, class B, low form, raised scale
Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Products individually packaged in PE bags, labelled with the article number, description and EAN code. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Graduated cylinders, PP, embossed scale
Low form. High clarity. Calibrated to contain (TD, In). Exposure to temperatures up to 80 °C will not cause tolerance limits to be exceeded!
Graduated cylinders, PP, tall form, class B, embossed scale
Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)
Graduated cylinders, PP, tall form, class B, embossed scale
Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)
Graduated cylinders, SAN, class B, embossed scale
Low form. Calibrated to contain (TD, In). Exposure to temperatures up to 80°C will not cause accuracy to exceed tolerance limits!
Graduated pipettes AR-GLAS®, class A, type graduated to contain, blue graduations
All Blaubrand® bulb pipettes are supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate or DAkkS calibration certificate.DIN 12689DE-M markingGraduations and inscriptions in high contrast blue enamelCalibrated to contain (TC, IN)
Graduated pipettes AR-GLAS®, class A, type graduated to contain, blue graduations, with DAkkS calibration certificate
All Blaubrand® bulb pipettes are supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate.DIN 12689DE-M markingGraduations and inscriptions in high contrast blue enamelCalibrated to contain (TC, IN)
Graduated pipettes AR-GLAS®, class A, type graduated to contain, blue graduations, with individual certificate
All Blaubrand® bulb pipettes are supplied with batch number and one batch certificate per packing unit. On request, they are also available with DAkkS calibration certificate.DIN 12689DE-M markingGraduations and inscriptions in high contrast blue enamelCalibrated to contain (TC, IN)
Graduated pipettes FORTUNA®, with suction piston, AR-Glass, similar to class A
With permanent, blue or amber enamelled graduations. Tolerances similar to class A.
Graduated pipettes with piston, Soda-lime glass, amber stain graduation
Graduated pipettes with attached syringe for safe and easy pipetting, with durable amber stain graduation, ring marks at main graduation points, zero at top, graduated to the tip.