Foot pumps OTAL®, battery-pumps
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeWith delivery tubes made of PP/PVCFor safe filling of car batteries with acid or distilled waterWith tube shutoff valveWith dosing tip for precise filling
Foot pumps OTAL®, PP
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor weak acids, alkalis and detergents
Foot pumps OTAL®, PP, with tube and stopcock
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mm1.5 m discharge tube, PVCStopcock made of PP/PE (Ø 10 mm)
Foot pumps OTAL®, PVDF
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PVDFUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor acids, alkalis and chlorine bleaching, not for heavily oxidising acids and alkalis
Foot pumps OTAL®, stainless steel
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of stainless steelUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor liquids that are not easily flammable in Hazard Category AIII (VbF)
Foot switch for bottle-top dispenser opus® dispenser
Foot switch for triggering dispensing.
Gas syringes, FORTUNA®, soda lime glass
Clear glass, with calibrated cylinder.With chemically-resistant, diffused amber stain graduations.
Gas syringes, FORTUNA®, soda lime glass, with capillary stopcock
Clear glass, with calibrated cylinder.With chemically-resistant, diffused amber stain graduations.
Gas-tight Barrel pump
With flexible discharge tubing for drawing off into larger canisters and containers. Convenient liquid transfer as the canister can be left standing on the floor. The connection cone is pressed against the canister manually.The pump is fitted with a gas-displacement device for odour-free, liquid transfer. The pump can be hermetically sealed with 2 ball valves.Parts in contact with media: Stainless steel AISI 304 (1.4301), PTFEWith gas-tight barrel screw joint, 2" fine threadNot suitable for acetone!
Gas-tight barrel pump, PP
The gas-tight barrel pump reduces the escape of dangerous, health-endangering or malodorous gases when filling liquids. The resulting vapours are returned directly to the original container via the gas pendulum line.Medium-contacting parts, PP, PE and PVC (hose)Steplessly extendable telescopic tube for barrel depths of 40 - 67 cmUniversal adapter for container openings of 34 - 70 mm
Gear pump drives, Reglo Digital with MasterflexLive
Pulsefree dispensing pumps with excellent repeatability!Flow rates 1.7 to 4680 ml/min (depending on mounted pump-head)5''-touch screenOperating modes:Pumping by drive speed (rpm)Pumping by flow rate (ml/min)Dispensing by volume (ml)Dispensing by time (0.1 s up to 999 hrs)Dispensing by volume within a pre-set timeInterval dispensing by volume with a pauseInterval dispensing by time with a pauseSetting the number of dispensing cyclesPause time setting (from 0.1 s up to 999 hrs)Back-steps for drip-free dispensingReversible rotation direction (only for Cavity Style pumpheads)Calibrating functions:For flow rate (ml/min)For dispensing volume (ml)
Glass-Metal Syringes SANITEX®
Made from neutral glass, with steel piston. Brown graduation, acid and alkali resistant. With centered Luer-slip/Luer-lock. May only be used for technical purposes. Autoclavable up to 200 °C.
Graduated cylinders, PMP, Class A, tall form
Highly transparent. DE-M marked. With red printed scale and ring marks at the primary scale points, calibrated "In".The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With printed batch number and the year of production. Hexagonal base with bottom studs provides high stability. To preserve markings, do not clean at temperatures exceeding 60 °C. Thus, conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving we recommend the design with raised graduations. Also available with DAkkS calibration certificate or individual quality certificate.
Graduated cylinders, PP, class B, embossed scale
Tall form, with spout, high clarity. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions. Food-safe, autoclavable.
Graduated cylinders, PP, class B, low form, raised scale
Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Products individually packaged in PE bags, labelled with the article number, description and EAN code. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Graduated cylinders, PP, embossed scale
Low form. High clarity. Calibrated to contain (TD, In). Exposure to temperatures up to 80 °C will not cause tolerance limits to be exceeded!
Graduated cylinders, PP, tall form, class B, embossed scale
Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)
Graduated cylinders, PP, tall form, class B, embossed scale
Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)
Graduated cylinders, SAN, class B, embossed scale
Low form. Calibrated to contain (TD, In). Exposure to temperatures up to 80°C will not cause accuracy to exceed tolerance limits!
Graduated pipettes AR-GLAS®, class A, type graduated to contain, blue graduations
All Blaubrand® bulb pipettes are supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate or DAkkS calibration certificate.DIN 12689DE-M markingGraduations and inscriptions in high contrast blue enamelCalibrated to contain (TC, IN)
Graduated pipettes AR-GLAS®, class A, type graduated to contain, blue graduations, with DAkkS calibration certificate
All Blaubrand® bulb pipettes are supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate.DIN 12689DE-M markingGraduations and inscriptions in high contrast blue enamelCalibrated to contain (TC, IN)
Graduated pipettes AR-GLAS®, class A, type graduated to contain, blue graduations, with individual certificate
All Blaubrand® bulb pipettes are supplied with batch number and one batch certificate per packing unit. On request, they are also available with DAkkS calibration certificate.DIN 12689DE-M markingGraduations and inscriptions in high contrast blue enamelCalibrated to contain (TC, IN)
Graduated pipettes FORTUNA®, with suction piston, AR-Glass, similar to class A
With permanent, blue or amber enamelled graduations. Tolerances similar to class A.
Graduated pipettes with piston, Soda-lime glass, amber stain graduation
Graduated pipettes with attached syringe for safe and easy pipetting, with durable amber stain graduation, ring marks at main graduation points, zero at top, graduated to the tip.