Membrane filters type 138, cellulose nitrate
Green membrane with dark-green grid, providing optimal contrast to light-colored or transparent bacteria colonies, individually, sterile packaged / non sterile.
Membrane Tweezers
Swiss made. Made of austenitic steel. Non-magnetizable. Good corrosion resistance to most chemicals, salts and acids. Especially suitable for safe handling of transfer membranes.
Metal caps, Erlenmeyer, Aluminium
Anodised in a choice of colours.Special caps for sterile, but not hermetically sealing, closure of culture flasks and media bottles with straight, rimmed or rimless necks as indicated. With nichrome steel springs that clamp onto the outer wall of the container.Cleaning advice available on request.
Metal caps, Labocap with handle, Aluminium
Anodised in a choice of colours. For sterile, but not hermetically sealing, closure of containers. With nichrome steel springs that clamp onto the outer wall of the container. Autoclavable.Cleaning advice available on request.
Metal trays for Histology
Made of stainless steel for easy removal of paraffin inclusions: they allow a precise location of the specimen into the paraffin.
Micro dialysers QuikPrep® Micro DispoDialyzer
Disposable dialyser for processing sample volumes from 5 to 100 µl. The entire unit floats directly in the dialysis buffer. To reduce the dialysis time, the dialyser can be placed in a beaker on a magnetic stirrer. After dialysis, the dialyser is placed in a new microcentrifuge collection tube and briefly centrifuged (500 to 2000 rpm for 1 to 2 seconds). Ideal for buffer exchange, detergent removal, sample preparation for HPLC/HPCE/GC/GC-MS/NMR, as well as purification of proteins, DNA and RNA.Easy handlingLeak-proofLow protein bindingHigh sample recoveryRapid dialysis/purificationThe micro dialyser comes with a foam float, cap, and two 1.5 ml collection tubes.
Micro pestles, CTFE / stainless steel
Reusable, for 500µl and 1.5ml reaction tubes. Autoclavable CTFE / stainless steel. Suitable for battery-operated drive motor (9.314 496).
Micro plates Riplate® magnetic
Riplate® magnetic plates have been specially developed for the reproducible magnetic separation of DNA and proteins and can also be used for cleaning, mixing or centrifugation of samples as well as for the storage and preparation of substances.For the filtration of proteins as well as for DNA extraction, an automated method called magnetic separation is commonly used. The technology is based on magnetic particles which allow the fast and efficient sample preparation with high throughput. The sustainability of these products as well as reliable analysis results are ensured by the production under cleanroom conditions (class 8). The plates are in line with the SBS standard (Society for Biomolecular Screening) and have been especially developed for the magnetic separation technology.High resistance towards commonly used chemicals, solvents and alcoholsHigh stability also during centrifugationNewly developed cylindrical wells enable a good bioturbation of samplesSlightly raised rims reduce the risk of cross-contaminationThe alphanumeric code allows the registration and identification of individual samples even in confined spacesSpecificationsTotal volumeRiplate® 96 SRW magnetic 0,2 ml:0.2 ml/WellRiplate® 96 SRW magnetic 2 ml:2 ml/WellWorking volumeRiplate® 96 SRW magnetic 0,2 ml:0 to 100 µlRiplate® 96 SRW magnetic 2 ml:20 to 1000 µl (with knobbed lid)
Micro test tubes, PP
Suitable for biological examination, e.g. PCR, cell uptake studies, RIA, EIA, etc. Functional design for storing, freezing and transporting reagents and samples. Compatible with standard microtitre plates and suitable for work with multi-channel pipettes.Autoclavable at 121 °C (2 bar), according to DIN EN 285Suitable for storage up to -80 °CBIO-CERT® CERTIFIED QUALITY
Micro test tubes, PP, strips of 8
Suitable for biological examination, e.g. PCR, cell uptake studies, RIA, EIA, etc. Functional design for storing, freezing and transporting reagents and samples. Compatible with standard microtitre plates and suitable for work with multi-channel pipettes.Autoclavable at 121 °C (2 bar), according to DIN EN 285Suitable for storage up to -80 °CBIO-CERT® CERTIFIED QUALITY
Micro Tubes EasyFit with Cap, PP
High resistance to temperatures and chemicalsAutoclavable at 121 °C / 2.1 bar (cap not closed)Place for markings on label area and flat coverMembrane can be punctured by sampling-needlesGraduationRound inside bottom for easy recovery of pellets or fluidsMade from clear polypropyleneEasy closure, for example for use in the chemical laboratories of a hospital
Micro Tubes with Cap, PP
Quick to open and leak-tight when closed, they are used in a myriad of applications. They are essential components of scientific investigations and diagnostic tests or in the storage nd filling of reagents. They are as resistant to heat and subzero temperatures as they are to chemicals and mechanical stress.
Micro tubes, PP, with attached screw cap, PE, with sealing cone
Reaction tubes with attached cover reduce the danger of contamination or mistakes due to mixing up covers. The sealing cone of the cover lies seamlessly against the interior of the tube, preventing the contents from coming into contact with the thread.UngraduatedOperating range -90 °C to 100 °CAttached covers are suitable for colored cover inserts (available separately)BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
Micro tubes, PP, with attached screw cap, PE, with silicone seal
Reaction tubes with attached cover reduce the danger of contamination or mistakes due to mixing up covers. The silicone ring in the cover provides an optimal seal for the reaction tube without coming into contact with the contents of the reaction tube itself. Tubes are suitable for storing liquid nitrogen in the gas phase.With matte label fieldOperating range -196 °C to 121 °CSuitable for autoclaving under DIN EN 285, at 121 °C (2 bar)BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
Micro tubes, PP, without screw cap
Operating range: -196 °C to 121 °CAutoclavable at 121 °C (2 bar), acc. DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Micro tubes, PP, without screw cap, ungraduated
Suitable for tamper-evident coverOperating range: -196 °C to 121 °CAutoclavable at 121 °C (2 bar), acc. DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Micro-pestle
Autoclavable micro-pestle for re-suspending pellets in 1.5 to 2.0 ml containers.
Microbiological culture media in tubes
Culture media for the detection of microorganisms. Suitable for membrane filtration or direct incubation. The content of a 20 ml tube can be poured into two 90 mm or three 60 mm Petri dishes.
Microbiological monitors Microcheck™, sterile
Microbiological monitors are disposable filter funnels for microbiological analyses. Graduations with markings on the outside of the funnel make it easier to read the sample volume and prevent hold-up of microorganisms in the funnel. The cylinder can be easily removed by squeezing. Can be converted into a Petri dish for cultivation or the membrane can simply be removed to be placed on a separate agar dish.
Microbiological rapid tests Dual agar Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.These dual-sided Dipslides are available in a wide range of different media types.
Microbiological Safety Cabinet, class II Type Airstream®
Class II according to DIN 12469Ergonomically angled and frameless front sashA large easy-to-read digital display and ergonomically sized touchpadTempered glass side walls (S-Series with stainless steel side walls)Esco triple-wall design with negative pressure prevents the possibility of contamination from leaksISOCIDE™ antimicrobial coating on all painted surfaces minimises contaminationQuickstart ModeSentinel-Microprocessor maintains steady blower speedRS232 serial interface portMore options on request, e.g. prefilter at intake socketModel variations:Model type E and S: Single ULPA-Filter/H14Model type G: Dual ULPA-Filter/H14Options on request:Electrical outlet, support stand, prefilter, service fixture, UV lamp, IV bar, single piece work surface for E-Series, IQ/OQ or KI DISCUS testPlease order support stand separately.