Dissecting Set, 8 pieces, stainless steel
1 Scissors, sharp1 Forceps, blunt1 Scalpel with blade 35 mm1 Scalpel with blade 45 mm1 Dressing scissors1 Forceps, sharp1 Dissecting needle1 Lancet
DMSO Resistant Peel Seal
Polyester/Aluminium laminate. Peelable. PP and COC microplates.Application:Compound storage. 100% DMSO resistance at room temp. Good on 1536well platesSealing:2 to 3 sec 170 to 175°CSeal Integrity:-80°C to +80°C
DNA LoBind Tubes, with screw cap
Less than 1% loss of DNA / RNA at low concentrations and critical conditions (high salt, short DNA-fragments)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP, manufactured under optimized conditionsHighly transparent
DNA LoBind Tubes, with snap-on lid
Less than 1% loss of DNA / RNA at low concentrations and critical conditions (high salt, short DNA-fragments)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP, manufactured under optimized conditionsHighly transparent
DNA Markers for Gel Electrophoresis
The ready-to-use DNA markers run precisely and produce a sharp, well defined ladder. They are available in six molecular weight ranges. The markers contain high intensity reference bands and may be used to perform size comparisons with DNA molecules ranging from the smallest of PCR fragments to large, linearised cosmid vectors.Up to 19 bandsIsolated from restrictive plasmids6 months stable at room temperature12 months shelf life at 4 °C24 months storable at -20 °CVials of 500 µl
DNA Microtubes CapLock LoTrace®, PP
For low content DNA sample preparation and assay.Double-Lock™ cap closing systemLow binding DNA surfaceFree of RNase, DNase, human DNA, endotoxins, PCR inhibitors, ATPManufactured under clean room conditionsTemperature range -195 up to 121 °CAutoclavable
Double cyto funnel Shandon™ Double Cytofunnel™, with white filter card
Disposable sample chamber for producing thin-layer preparations by centrifugation. With white filter card and cap. Ideal for immunochemical techniques.For sample volumes from 0.05 to 0.25 ml per chamberTwo sample deposition areas, each with Ø 6 mm (28 mm2)Funnel marking corresponds to the slide marking for easy sample identificationPre-attached white filter card for high absorbencyPlease order slide clip for holding the cyto funnels separately.
Double cyto funnel Shandon™ EZ Double Cytofunnel™, with white filter card
Disposable sample chamber for producing thin-layer preparations by centrifugation. With white filter card and cap. Ideal for immunochemical techniques.For sample volumes from 0.05 to 0.25 ml per chamberTwo sample deposition areas, each with Ø 6 mm (28 mm2)Funnel marking corresponds to the slide marking for easy sample identificationPre-attached white filter card for high absorbencyReduces the risk of exposure to pathogenic samplesDisposable product eliminates the need for time-consuming decontamination and cleaningDecreases the possibility of cross-contaminationNo slide clips required
Dounce homogenizers
Glass. Suitable if the nuclei are to be maintained after homogenising.Two pestles are supplied:For pre-grindingFor fine grindingSpare components are available and are completely interchangeable.
Drawer boxes Styrokay
White modular drawer box with 6 drawers for histology cassettes, documents and small laboratory utensils.Including inscription labels49 histology cassettes per drawer294 histology cassettes per box
Drigalski spatula
For uniform distribution of bacterial material on solid culture media.
Dry RC Dialysis Tubing Spectra/Por® 1, 2, 3 and 4
Standard Grade Regenerated Cellulose (RC) is a clear, flexible and sturdy dialysis tubing. This tubing is ideal for a broad range of applications in which there is a significant size difference between the MW species being separated, including sample preparartion, desalting, buffer exchange, pH change, protein purification. Offering a good chemical compatibility, Standard Grade RC can be used with dilute strong acids and bases, concentrated weak acids and bases, most alcohols and some mild or dilute organics, including DMSO. Standard RC can tolerate pH 2 to 12 and temperatures 4 to 121 °CRC dialysis tubing supplied dry with glycerol humectant for easy handling and manipulation. Soak in DI water for 30 minutes to remove glycerol. Contains trace levels of heavy metals and sulphides.Spectra/Por® 1, 3 und 4:For standard dialysis, different MWCO and flat widthsSpectra/Por® 2:Dialysis Tubing with higher permeability
Dyes for tissue marking Richard-Allan Scientific™ Mark-It™
Permanent dyes that maintain their original brilliance during routine tissue processing cycles. Ideal for identifying tissue margins. Suitable for fresh or formalin-fixed tissue.
EasyFill™ Cell Factory System Accessories, HDPE
It is now easy to create a Thermo Scientific Nunc EasyFill™ Cell Factory system for your applications.Connections made easy: Plug a media bag or tubing set to any cell factory.Save time and reduce costs: Minimise cleaning processes and sterility validations. Accessories are gamma irradiated and individually wrapped.Prevent build up of back pressure during filling application: New venting options provide additional air venting when filling and harvesting by gravity or with a peristaltic pump.
Elastic stain kit Richard-Allan Scientific™
The stain kit is based on the Verhoeff's technique for staining elastic fibres. For the diagnosis of atrophy, thinning and loss of elastic tissue, as well as for the detection of breaks, splitting and reduplication of elastic fibres.Staining result: elastic fibres are stained blue-black to black, with red collagen and yellow background
Electric underframes for microbiological safety cabinets SafeFAST Premium
The underframes are electrically height-adjustable. The entire workstation is raised or lowered by means of two integrated lifting cylinders and thus adapts to the user. With adjustable feet.
Electric underframes with castors for microbiological safety cabinets SafeFAST Premium
The underframes are electrically height-adjustable. The entire workstation is raised or lowered by means of two integrated lifting cylinders and thus adapts to the user. With castors.
Electrically adjustable bases for Thermo Scientific™ Safety cabinets
Electrically adjustable bases with cable remote control, for 750 to 950 mm working height
Electrofusion and electroporation system ECM® 2001+, Cell fusion system
Multifunctional system for fast, efficient cell fusion in hybridoma production, hybrid cell formation, and nuclear transfer, as well as square wave electroporation for transfection of genes and other molecules into mammalian cell lines.Large, easy-to-use touchscreen interfacePreset protocols for common hybridoma, embryo manipulation, and nuclear transfer applicationsSeparate electrofusion and electroporation function menus for optimised protocol programming, data organisation, and navigationQuick start menus for fast access to the most frequently used electrofusion and electroporation parametersUser-defined electrofusion protocols: combination of up to 19 AC protocol steps and 1 DC protocol stepStorage of up to 1000 user-defined protocolsThe supplied safety stand connects to the generator to safely deliver high voltage electrical pulses to cuvettes.The flat electrode generates a divergent field for cell fusion.Scope of supply: Generator ECM® 2001+, microslide (0.5 mm / 3.2 mm), Meander fusion chamber, flat electrode, electrode adapter, connection cable, safety stand, electroporation cuvettes 1 mm / 2 mm / 4 mm (10 each), cuvette rackSquare wave (DC)Voltage LV mode:5 ... 500 VVoltage HV mode:505 ... 3000 VMultiple pulse:1 ... 100 pulses per samplePulse length LV mode:10 µs ... 999 msPulse length HV mode:10 µs ... 600 µsPulse interval:0.1 ... 10 sSine wave (AC)Voltage:5 ... 75 VFrequency:0.2 ... 2 MHzPulse length:0 ... 99 sCharging time:7 s
Electrofusion and electroporation system ECM® 2001+, Electroporation system
Multifunctional system for fast, efficient cell fusion in hybridoma production, hybrid cell formation, and nuclear transfer, as well as square wave electroporation for transfection of genes and other molecules into mammalian cell lines.Large, easy-to-use touchscreen interfacePreset protocols for common hybridoma, embryo manipulation, and nuclear transfer applicationsSeparate electrofusion and electroporation function menus for optimised protocol programming, data organisation, and navigationQuick start menus for fast access to the most frequently used electrofusion and electroporation parametersUser-defined electrofusion protocols: combination of up to 19 AC protocol steps and 1 DC protocol stepStorage of up to 1000 user-defined protocolsThe supplied safety stand connects to the generator to safely deliver high voltage electrical pulses to cuvettes.Scope of supply: Generator ECM® 2001+, safety stand, electroporation cuvettes 1 mm / 2 mm / 4 mm (10 each), cuvette rackSquare wave (DC)Voltage LV mode:5 ... 500 VVoltage HV mode:505 ... 3000 VMultiple pulse:1 ... 100 pulses per samplePulse length LV mode:10 µs ... 999 msPulse length HV mode:10 µs ... 600 µsPulse interval:0.1 ... 10 sSine wave (AC)Voltage:5 ... 75 VFrequency:0.2 ... 2 MHzPulse length:0 ... 99 sCharging time:7 s
Electrofusion and electroporation system ECM® 2001+, Embryo manipulation system
Multifunctional system for fast, efficient cell fusion in hybridoma production, hybrid cell formation, and nuclear transfer, as well as square wave electroporation for transfection of genes and other molecules into mammalian cell lines.Large, easy-to-use touchscreen interfacePreset protocols for common hybridoma, embryo manipulation, and nuclear transfer applicationsSeparate electrofusion and electroporation function menus for optimised protocol programming, data organisation, and navigationQuick start menus for fast access to the most frequently used electrofusion and electroporation parametersUser-defined electrofusion protocols: combination of up to 19 AC protocol steps and 1 DC protocol stepStorage of up to 1000 user-defined protocolsThe 0.5 and 1.0 mm microslides produce a divergent energy field ideal for efficient embryo fusion. The 3.2 mm microslide provides a homogeneous energy field for high fusion rates of hybridoma cells.Scope of supply: Generator ECM® 2001+, microslides with round wire electrode (0.5 mm / 1.0 mm), microslide with rectangular wire electrode (3.2 mm), micrograbber adapter cablesSquare wave (DC)Voltage LV mode:5 ... 500 VVoltage HV mode:505 ... 3000 VMultiple pulse:1 ... 100 pulses per samplePulse length LV mode:10 µs ... 999 msPulse length HV mode:10 µs ... 600 µsPulse interval:0.1 ... 10 sSine wave (AC)Voltage:5 ... 75 VFrequency:0.2 ... 2 MHzPulse length:0 ... 99 sCharging time:7 s
Electrofusion and electroporation system ECM® 2001+, Generator
Multifunctional system for fast, efficient cell fusion in hybridoma production, hybrid cell formation, and nuclear transfer, as well as square wave electroporation for transfection of genes and other molecules into mammalian cell lines.Large, easy-to-use touchscreen interfacePreset protocols for common hybridoma, embryo manipulation, and nuclear transfer applicationsSeparate electrofusion and electroporation function menus for optimised protocol programming, data organisation, and navigationQuick start menus for fast access to the most frequently used electrofusion and electroporation parametersUser-defined electrofusion protocols: combination of up to 19 AC protocol steps and 1 DC protocol stepStorage of up to 1000 user-defined protocolsScope of supply: Generator ECM® 2001+, high voltage output cable 1.5 m, adapter setSquare wave (DC)Voltage LV mode:5 ... 500 VVoltage HV mode:505 ... 3000 VMultiple pulse:1 ... 100 pulses per samplePulse length LV mode:10 µs ... 999 msPulse length HV mode:10 µs ... 600 µsPulse interval:0.1 ... 10 sSine wave (AC)Voltage:5 ... 75 VFrequency:0.2 ... 2 MHzPulse length:0 ... 99 sCharging time:7 s
Electrofusion and electroporation system ECM® 2001+, Hybridoma production system
Multifunctional system for fast, efficient cell fusion in hybridoma production, hybrid cell formation, and nuclear transfer, as well as square wave electroporation for transfection of genes and other molecules into mammalian cell lines.Large, easy-to-use touchscreen interfacePreset protocols for common hybridoma, embryo manipulation, and nuclear transfer applicationsSeparate electrofusion and electroporation function menus for optimised protocol programming, data organisation, and navigationQuick start menus for fast access to the most frequently used electrofusion and electroporation parametersUser-defined electrofusion protocols: combination of up to 19 AC protocol steps and 1 DC protocol stepStorage of up to 1000 user-defined protocolsThe coaxial chambers have identical electrical characteristics to allow direct scale-up to production once the pulse parameters have been optimised. Coaxial optimisation chamber with transparent bottom allows visualisation of the cell alignment by inverted or regular microscope.Scope of supply: Generator ECM® 2001+, coaxial optimisation chamber (2 ml), coaxial production chamber (9 ml), adapter set, cytofusion medium C (500 ml)Square wave (DC)Voltage LV mode:5 ... 500 VVoltage HV mode:505 ... 3000 VMultiple pulse:1 ... 100 pulses per samplePulse length LV mode:10 µs ... 999 msPulse length HV mode:10 µs ... 600 µsPulse interval:0.1 ... 10 sSine wave (AC)Voltage:5 ... 75 VFrequency:0.2 ... 2 MHzPulse length:0 ... 99 sCharging time:7 s