Loop steriliser SteriMax basic
For rapid sterilisation of inoculation loops using infrared technology. Instantly ready for use without warm-up. Sterilisation at 750 to 1000 °C. Suitable for all laboratories, anaerobic working environments and laminar flow cabinets.Instantly ready to work without any unnecessary warm-upHeating tube made of special quartz glassSimple cleaning of the device and the heating tubeSterilisation tube closed on one side to prevent contaminationWith timerEasy to cleanNo danger of combustion on the housing (Cool-Touch)Efficient use of energyTested and certified for photobiological safety in accordance with EN 62471 by the BG ETEM - Risk-free for skin and eyesRobust housing made of stainless steel and safety glassCan be operated directly on the touch panel of the device or via optional foot pedalFast and efficient, the sterilisation process takes only 10 secondsScope of supply: SteriMax basic, mains cable, 1 x Inoculation loop Ø 3 mm, 1 x Inoculation loop holder, power cableSpecificationsTemperatur range:750 ... 1000 °CPower consumption:600 WDimensions (W x D x H):110 x 180 x 170 mmWeight:1,8 kgPower supply:220 - 240 V, 50/60 HzIP code:IP 20
Loop Steriliser SteriMax smart
For rapid sterilisation of inoculation loops using infrared technology. Instantly ready for use without warm-up. Sterilisation at 750 to 1000 °C. Suitable for all laboratories, anaerobic working environments and laminar flow cabinets.Instantly ready to work without any unnecessary warm-upHeating tube made of special quartz glassSimple cleaning of the device and the heating tubeSterilisation tube closed on one side to prevent contaminationWith timerEasy to cleanNo danger of combustion on the housing (Cool-Touch)Efficient use of energyTested and certified for photobiological safety in accordance with EN 62471 by the BG ETEM - Risk-free for skin and eyesRobust housing made of stainless steel and safety glassAuto-Start through touchless IR-Sensor technologyTouch operationAdjustable sterilisation and cool-down timers for two usersScope of supply: SteriMax smart, 2 x quartz glass heating tubes, inoculation loop holder, inoculation loop (diam. 3 mm), holding device for 3 inoculation loops, power cableSpecificationsTemperatur range:750 ... 1000 °CPower consumption:600 WDimensions (W x D x H):110 x 180 x 170 mmWeight:1,8 kgPower supply:220 - 240 V, 50/60 HzIP code:IP 20
Loop Sterilizer schuett solaris
Sterilisation with light. Sterilisation of inoculating loops, tweezers and small instruments within seconds.Sturdy and maintenance-freeNo gas, no open flame - Works with standard electrical powerIntuitive, easy to useInstant, ready-to-use, no warm-up time, no waitingSterilization temperature: 900 to 1300°CTouch-free START, with IR- sensor and adjustable timer (5 to 7 seconds)For use in Laminar Flow CabinetsIdeal for mobile operation in the fieldThe schuett solaris is the perfect solution if an open flame should be avoided or gas cartridges etc. are not available. Used with standard electrical power. Reaches the safe working temperature of 900 to 1300°C within a split second. No excess heat, no energy consumption between work cycles. START is generated by an infra-red sensor, which allows for efficient one-handed operation. Pathogenic material is kept inside the sterilization chamber. No spreading, no splashing. Working angle adjustment (4-steps).Scope of supply: schuett solaris inoculation loop sterilizer, 2 x quartz glass tubes, 1 x inoculation loop holder with inoculation loop (sample)SpecificationsDimensions (W x D x H):152 x 195 x 210mmWeight:approx. 2500g
Luminometer Clean-Trace™ LM1
Simple, quick and reliable hand held diagnostic tool to verify cleaning effectiveness and capture, store and manage data for later analysis.Re-engineered for improved precision and accuracyEasy to use and faster time to resultRobust for the Manufacturing EnvironmentSystem includes the Clean-Trace® Luminometer and Clean-Trace® Hygiene Monitoring and Management Software to help you monitor testing results over timeErgonomic Design for Simple One-handed operationWireless Data Transfer23 languages for multilingual pre-production teamsRobust to provide consistent results across temperaturesNew software has easy-to-use dashboard that immediately turns data into actionable information.
Magnetic filter funnels Sentino™, Polyphenylsulfone (PPSU)
The filter funnels are graduated and have a leak-proof magnetic closure that enables one-handed operation. The funnels are robust, shatterproof, and can withstand several autoclave cycles. Suitable for Ø 47 mm membrane filters. Designed for use with the microbiology pump Sentino™.
Magnetic filter funnels, Polyphenylsulfone (PPSU)
The filter funnels are graduated and have a leak-proof magnetic closure that enables one-handed operation. The funnels are robust, shatterproof, and can withstand several autoclave cycles. Suitable for Ø 47 mm membrane filters. Including rubber stopper no. 8.
Magnetic filter funnels, Polyphenylsulfone (PPSU), with lid
The filter funnels are graduated and have a leak-proof magnetic closure that enables one-handed operation. The funnels are robust, shatterproof, and can withstand several autoclave cycles. Suitable for Ø 47 mm membrane filters. Including rubber stopper no. 8.
Magnifying lens for Scan® 50, Scan® 50 pro and Scan® 100
Magnifying lens with flexible arm.
Membrane Filter Microsart® @filter units, CN
Microsart® @filter 100 and 250 filter units are a sterile and ready-to-use combination of funnel made of PP with 47 mm diameter, filter base and gridded membrane in one unit. They have been specifically developed for the detection and enumeration of microorganisms in pharmaceuticals, cosmetics, food, beverages, water and other liquids. The membrane filters can also be used in conjunction with Sartorius Stedim Biotech nutrient board discs.
Membrane filter Nalgene™, cellulose nitrate
Suitable for bacteriological analysis of drinking, dirty and natural water by membrane filtration method.White with black gridSterile
Membrane filters Type 130, cellulose nitrate
Gray membrane (after wetting, black) with white grid, for detection of yeasts and molds, particle count and microscopy, individually, sterile packaged / non sterile.Other types available on request.
Membrane filters type 138, cellulose nitrate
Green membrane with dark-green grid, providing optimal contrast to light-colored or transparent bacteria colonies, individually, sterile packaged / non sterile.
Metal caps, Erlenmeyer, Aluminium
Anodised in a choice of colours.Special caps for sterile, but not hermetically sealing, closure of culture flasks and media bottles with straight, rimmed or rimless necks as indicated. With nichrome steel springs that clamp onto the outer wall of the container.Cleaning advice available on request.
Metal caps, Labocap with handle, Aluminium
Anodised in a choice of colours. For sterile, but not hermetically sealing, closure of containers. With nichrome steel springs that clamp onto the outer wall of the container. Autoclavable.Cleaning advice available on request.
Micro pestles, CTFE / stainless steel
Reusable, for 500µl and 1.5ml reaction tubes. Autoclavable CTFE / stainless steel. Suitable for battery-operated drive motor (9.314 496).
Micro-pestle
Autoclavable micro-pestle for re-suspending pellets in 1.5 to 2.0 ml containers.
Microbiological culture media in tubes
Culture media for the detection of microorganisms. Suitable for membrane filtration or direct incubation. The content of a 20 ml tube can be poured into two 90 mm or three 60 mm Petri dishes.
Microbiological monitors Microcheck™, sterile
Microbiological monitors are disposable filter funnels for microbiological analyses. Graduations with markings on the outside of the funnel make it easier to read the sample volume and prevent hold-up of microorganisms in the funnel. The cylinder can be easily removed by squeezing. Can be converted into a Petri dish for cultivation or the membrane can simply be removed to be placed on a separate agar dish.
Microbiological rapid tests Dual agar Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.These dual-sided Dipslides are available in a wide range of different media types.
Microbiology pump Sentino™
The microbiology pump is ideal for the microbiological analysis of aqueous samples using membrane filter technology. It pulls the sample through the filter and liquid channel and eliminates the need for a vacuum source. It also ensures that the liquid flows in one direction without backing up and contaminating the analysis. The pump is easy to clean and features a small footprint and one-way liquid channel to maximise the working area and minimise the risk of contamination. The fluid channel is easy to install and replaceable to avoid potential biofilm formation. Filtration can be easily controlled via the soft-touch keypad with on/off and pulse function. Fixed settings prevent changes to the filtration parameters. Meets the filtration parameters of membrane filter technology described in EPA, ISO, and ASTM standards.
Microsart® @filter 100, with PVDF membrane filter
Filtration unit, with a 100 ml funnel and a 47 mm PVDF membrane filter. For microbiological and analytical testing of pharmaceuticals, beverages, water and other liquids.Click-Fit closureSterile
Microsart® Media, prefille dishes
Microsart® media are dishes pre-filled with different types of agar medium, sterile-packaged and ready to use.