Agarose for gel electrophoresis
This agaroses are suitable for routine analysis of nucleic acids. They combine tensile strength with low electroendoosmotic effects to achieve high resolving power for a wide size range of nucleic acid fragments. AG agaroses are also very environmentally friendly, being manufactured by a process which excludes organic solvents. Also available as low melting point agarose for nucleic acid recovery and enzymatic applications (Cat. No. 4.658 455) and as High Resolution PCR grade agarose for separation of small DNA fragments of up to 800 bp (Cat. No. 6.270 615). Other packing sizes on request.SpecificationsAG | LMA | HRACAS: Appearance:9012-36-6 | 39346-81-1 | 39346-81-1 White to off-white powderEEO:≤ 0,13 % | ≤ 0,1 % | ≤ 0,1%Gelling Point:36 °C ±1,5°C (1,5 % gel) | 26-30 °C (1,5 % gel) | ≤ 33 °C (1,5 % gel)Melting Point:88 °C ±1,5°C (1,5 % gel) | ≤ 65 °C (1,5 % gel) | ≤ 70 °C (1,5 % gel)Solubility:Clear, colourless solution at 1g in 100ml waterMoisture: 10 %Gel Strength:≥ 1200 g/cm2 (1% gel) | ≥ 200 g/cm² (1% gel) | ≥ 750 g/cm² (1,5% gel)Sulphate: 0,20 % | ≤ 0,1 % | ≤ 0,1 %DNase, RNase, Protease, Endonuclease:None Detected
Agarose gel electrophoresis workflow package choicePACK
Complete package for routine applications of agarose gel electrophoresis in the laboratory.Electrophoresis tank multiSUB Choice offers a selection of 3 gel tray sizes (15 x 7 cm, 15 x 10 cm and 15 x 15 cm) and can thus be used flexiblyPower supply PowerPro can be operated in constant mode or programmed and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Choice TRIO, power supply PowerPro 300, UV fluorescent ruler, UV gel scoop (15 cm), agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (50 x 1 l)
Agarose gel electrophoresis workflow package miniPACK
Starter package for working with small agarose gels in the laboratory.Electrophoresis tank multiSUB Midi can process up to 100 samples and each platinum electrode is recessed in a removable cassette to protect it from damagePower supply PowerPro can be operated in constant mode or programmed and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Midi DUO, power supply PowerPro 300, UV fluorescent ruler, UV gel scoop (10 cm), agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (50 x 1 l)
Agarose gel electrophoresis workflow package screenPACK
Starter package for working with agarose gels with high sample throughput in the laboratory.Electrophoresis tank multiSUB Screen offers a selection of 3 gel tray sizes (26 x 16 cm, 26 x 24 cm and 26 x 32 cm) and is equipped with buffer recirculationPower supply PowerPro can operate agarose gels at up to 500 V and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Screen TRIO, power supply PowerPro 500, UV fluorescent ruler, UV gel scoop (26 cm), agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (50 x 1 l)
Automatic Plate Heat Sealer ALPS 5000
With the Thermo Scientific™ Plate Heat Sealer, microtitre plates can be heat-sealed quickly and easily. Sealing time, temperature, pressure, foil length and sealing distance are adjustable.Seals plates from 7 to 46 mm highReduced risk of contamination than in pneumatically driven sealersTouch screen controlSavable protocolsRS232 interfaceSealing temperature range:Ambient ... 199 °CSealing speed:30 sec. per plateOperating humidity range:10 ... 80 %, non-condensingOperating temperature range:15 ... 40 °CDimensions (W x D x H):232 x 506 x 518 mmWeight:25 kgPower supply:110 ... 240 V, 50/60 Hz
Blue light LED transilluminator safeVIEW Mini-2
The compact LED transilluminator offers a safe way to view and document fluorescently stained nucleic acid gels. The blue 470 nm LED light source has the advantage of causing no damage to DNA and RNA.Aluminium alloy casingAutomatic shutdown after approx. 6 minutesIncluding filter screen with orange filter (580 nm)Compatible with electrophoresis chambers of the size of multiSUB Mini and Midi gel tanksScope of supply: Transilluminator, filter, hoodWavelength:470 nmViewing size:153 x 153 mmDimensions (W x D x H):200 x 200 x 13.9 mmWeight:760 gPower supply:DC 12 V, 2 A
Blue light LED transilluminators runVIEW MINI
The Mini-Blue light Transilluminator uses harmless blue light to illuminate both traditional Ethidium bromide stained gels as well as safe stains. Slotting under any gel tank, but perfect for our MINI and MIDI sized multiSUB gel tanks. With an orange filter window to visualize DNA in real time within gel tanks, it is perfect for quickly checking PCR fidelity and restriction digest results. The device can also be used as a stand-alone transilluminator with the gel placed directly on the illuminator.High intensity blue LED illuminator allows visualization of a wide range of fluorescent gel stainsCompatible with runSAFE, commercial safe stains and ethidium bromideScope of supply: Transilluminator, filter (orange)SpecificationsWavelength:470 nmViewing size:112 x 75 mmDimensions (W x D x H):86 x 170 x 25 mmWeight:338 gPower supply:DC 12 V, 2 A
Blue- and white light LED-Transilluminators
Powerful LED lighting arrays for blue (470 nm) and white (broad wavelength) illumination to image fluorescent and colorimetric gels. Through LED lights no ageing of UV bulbs and because of the inbuilt white LED array a separate white light table is not necessary. Well suited for teaching labs in universities and schools. Compatible with blue light excited safe DNA stains, as well as traditional stains such as ethidium bromide.Magnetic filter compatible with wide range of DNA stains3 level adjustable LED intensityBottom up illumination provides even sample illuminationAutomatic power-off to prevent heat build-upHigh quality aluminium housingScope of supply:Transilluminator, orange hinged filter, paper hoodSpecificationsWavelength:470 nm + white lightViewing size:120 x 180 mmDimensions (W x D x H):220 x 185 x 30 mmInput voltage:12 V, 2 APower supply:110 ... 240 V
Cap strips, PP
For sealing 8 well PCR tube strips or 96-well PCR plates. Large end tab facilitates the removal of the cap strip.LabeledHighly transparent flat caps are suitable for qPCRFree of DNase, RNase, human DNA, endotoxin and pyrogen
Cap strips, PP, strips of 8
For PCR plates. BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR-Inhibitors.
Clear Seal
For PP, PS and COC microplates. Transparent, Peelable.Application:Quantitative PCR, fluorescence / colorimetric optical assays.Sealing:2 to 3 sec 170 to 175°CSeal Integrity:-80°C to +110°C, PCR with pressure lids
Clear Seal 3730
Thin clear Polyester backed film forming a piercable seal to PP, PS and COC plates.Application:ABi 3730 capillary sequencing. Quantitative PCR. Not peelable.Sealing:1 sec 170 to 175°CSeal Integrity:-80°C to +80°C, 110°C with PCR lid pressure
Clear Seal MkII
Clear Polyester backed film, with non peelable seal on Polypropylene microplates.Application:Quantitative PCR, optical assays, Roche Lightcycler480, waterbath cycling.Sealing:2 to 3 sec 170 to 175°C.Seal Integrity:-80°C to 110°C
CloneSaver™ Cards
96-well format for high throughput applicationsStabilize BAC and plasmid DNA in one easy step from bacterial culture, resuspended colony, glycerol stock or purified plasmid DNAClones can be rapidly screened by PCR without need for miniprepsPlasmid DNA on Clone SaverCards is stable at room temperature for at least 4 years (real-time data)DNA is easily accessible for downstream applications such as transformations and PCR
Compact UV transilluminators
Compact designMetal housing, with stainless steel filter frame and "long life" filterModern technology, highest quality manufactureSingle or dual wavelength models availableBECXF models have intensity selector (Hi/Lo)
Concentrator Savant™ SPD1030 / 2030 SpeedVac™ Kits
The Thermo Scientific Savant SpeedVac concentrators feature a microprocessor control panel with digital display and are easily programmable. Simple installation and operation due to the integrated design.Digital display for viewing and setting parameters (time, temperature, vacuum)Vacuum control for vacuum ramping and ultimate level setting to optimise drying times and eliminate bumping of different solvent mixturesDual timers for independent control of heater and run timeOil-free vacuum source eliminates the need to add/change oilStandard PTFE coated chamberSolvent and Solvent Combinations: Acetonitrile, Ethanol, Methanol, Methylene Chloride, Water and other organic solventsScope of supply: SpeedVac system incl. oil-free diaphragm-vacuum pump, vacuum gauge and -50ºC cold trap, HR200-12 rotor 200 x 1.5 ml (SPD1030P1-230 / 2030P1-230) , or without rotor (SPD1030A-230 / 2030A-230), CryoCool heat transfer fluid (1l) and glass condensation flask (GCF400)SpecificationsMax. Vacuum:10 Torr (13 mbar)Displacement volume:30 l/min at 50 HzChamber temperature:35 ... 80 °CAmbient temperature:17 ... 32 °C-Refrigerated Vapor Trap:4 l / -50 °C (approximate value)Dimension (W x D x H):79 x 71 x 49 cmWeight:93 kgPower supply:230 V / 50 Hz
Cooling Block Systems, FreezeBox™
Blue. FreezeBox™ is a new, energy-saving, environmentally friendly and safe cooling equipment, without additives. It does not require electricity (except for pre-cooling the cores in the freezer) and no ice for low-temperature cooling of biological samples. The system can be used ice-free, is lightweight, easy to transport and ideal for the collection and storage of biological samples. It can be combined with interchangeable cores and different tube modules. Cooling cores can be tempered in a refrigerator or freezer and inserted into the FreezeBox™. For operation with dry ice, leave out the cooling core and fill with 200 g dry ice instead.For use with cooling core, ice or dry iceEasy to clean and disinfectDurable, suitable for frequent useEasy to mount
DMSO Resistant Peel Seal
Polyester/Aluminium laminate. Peelable. PP and COC microplates.Application:Compound storage. 100% DMSO resistance at room temp. Good on 1536well platesSealing:2 to 3 sec 170 to 175°CSeal Integrity:-80°C to +80°C
DNA Markers for Gel Electrophoresis
The ready-to-use DNA markers run precisely and produce a sharp, well defined ladder. They are available in six molecular weight ranges. The markers contain high intensity reference bands and may be used to perform size comparisons with DNA molecules ranging from the smallest of PCR fragments to large, linearised cosmid vectors.Up to 19 bandsIsolated from restrictive plasmids6 months stable at room temperature12 months shelf life at 4 °C24 months storable at -20 °CVials of 500 µl
Electrofusion and electroporation system ECM® 2001+, Cell fusion system
Multifunctional system for fast, efficient cell fusion in hybridoma production, hybrid cell formation, and nuclear transfer, as well as square wave electroporation for transfection of genes and other molecules into mammalian cell lines.Large, easy-to-use touchscreen interfacePreset protocols for common hybridoma, embryo manipulation, and nuclear transfer applicationsSeparate electrofusion and electroporation function menus for optimised protocol programming, data organisation, and navigationQuick start menus for fast access to the most frequently used electrofusion and electroporation parametersUser-defined electrofusion protocols: combination of up to 19 AC protocol steps and 1 DC protocol stepStorage of up to 1000 user-defined protocolsThe supplied safety stand connects to the generator to safely deliver high voltage electrical pulses to cuvettes.The flat electrode generates a divergent field for cell fusion.Scope of supply: Generator ECM® 2001+, microslide (0.5 mm / 3.2 mm), Meander fusion chamber, flat electrode, electrode adapter, connection cable, safety stand, electroporation cuvettes 1 mm / 2 mm / 4 mm (10 each), cuvette rackSquare wave (DC)Voltage LV mode:5 ... 500 VVoltage HV mode:505 ... 3000 VMultiple pulse:1 ... 100 pulses per samplePulse length LV mode:10 µs ... 999 msPulse length HV mode:10 µs ... 600 µsPulse interval:0.1 ... 10 sSine wave (AC)Voltage:5 ... 75 VFrequency:0.2 ... 2 MHzPulse length:0 ... 99 sCharging time:7 s
Electrofusion and electroporation system ECM® 2001+, Electroporation system
Multifunctional system for fast, efficient cell fusion in hybridoma production, hybrid cell formation, and nuclear transfer, as well as square wave electroporation for transfection of genes and other molecules into mammalian cell lines.Large, easy-to-use touchscreen interfacePreset protocols for common hybridoma, embryo manipulation, and nuclear transfer applicationsSeparate electrofusion and electroporation function menus for optimised protocol programming, data organisation, and navigationQuick start menus for fast access to the most frequently used electrofusion and electroporation parametersUser-defined electrofusion protocols: combination of up to 19 AC protocol steps and 1 DC protocol stepStorage of up to 1000 user-defined protocolsThe supplied safety stand connects to the generator to safely deliver high voltage electrical pulses to cuvettes.Scope of supply: Generator ECM® 2001+, safety stand, electroporation cuvettes 1 mm / 2 mm / 4 mm (10 each), cuvette rackSquare wave (DC)Voltage LV mode:5 ... 500 VVoltage HV mode:505 ... 3000 VMultiple pulse:1 ... 100 pulses per samplePulse length LV mode:10 µs ... 999 msPulse length HV mode:10 µs ... 600 µsPulse interval:0.1 ... 10 sSine wave (AC)Voltage:5 ... 75 VFrequency:0.2 ... 2 MHzPulse length:0 ... 99 sCharging time:7 s
Electrofusion and electroporation system ECM® 2001+, Embryo manipulation system
Multifunctional system for fast, efficient cell fusion in hybridoma production, hybrid cell formation, and nuclear transfer, as well as square wave electroporation for transfection of genes and other molecules into mammalian cell lines.Large, easy-to-use touchscreen interfacePreset protocols for common hybridoma, embryo manipulation, and nuclear transfer applicationsSeparate electrofusion and electroporation function menus for optimised protocol programming, data organisation, and navigationQuick start menus for fast access to the most frequently used electrofusion and electroporation parametersUser-defined electrofusion protocols: combination of up to 19 AC protocol steps and 1 DC protocol stepStorage of up to 1000 user-defined protocolsThe 0.5 and 1.0 mm microslides produce a divergent energy field ideal for efficient embryo fusion. The 3.2 mm microslide provides a homogeneous energy field for high fusion rates of hybridoma cells.Scope of supply: Generator ECM® 2001+, microslides with round wire electrode (0.5 mm / 1.0 mm), microslide with rectangular wire electrode (3.2 mm), micrograbber adapter cablesSquare wave (DC)Voltage LV mode:5 ... 500 VVoltage HV mode:505 ... 3000 VMultiple pulse:1 ... 100 pulses per samplePulse length LV mode:10 µs ... 999 msPulse length HV mode:10 µs ... 600 µsPulse interval:0.1 ... 10 sSine wave (AC)Voltage:5 ... 75 VFrequency:0.2 ... 2 MHzPulse length:0 ... 99 sCharging time:7 s
Electrofusion and electroporation system ECM® 2001+, Generator
Multifunctional system for fast, efficient cell fusion in hybridoma production, hybrid cell formation, and nuclear transfer, as well as square wave electroporation for transfection of genes and other molecules into mammalian cell lines.Large, easy-to-use touchscreen interfacePreset protocols for common hybridoma, embryo manipulation, and nuclear transfer applicationsSeparate electrofusion and electroporation function menus for optimised protocol programming, data organisation, and navigationQuick start menus for fast access to the most frequently used electrofusion and electroporation parametersUser-defined electrofusion protocols: combination of up to 19 AC protocol steps and 1 DC protocol stepStorage of up to 1000 user-defined protocolsScope of supply: Generator ECM® 2001+, high voltage output cable 1.5 m, adapter setSquare wave (DC)Voltage LV mode:5 ... 500 VVoltage HV mode:505 ... 3000 VMultiple pulse:1 ... 100 pulses per samplePulse length LV mode:10 µs ... 999 msPulse length HV mode:10 µs ... 600 µsPulse interval:0.1 ... 10 sSine wave (AC)Voltage:5 ... 75 VFrequency:0.2 ... 2 MHzPulse length:0 ... 99 sCharging time:7 s