Automated cell counter ADAM™ CellT
The automated cell counter utilises sensitive fluorescence dye saining, LED optics and CMOS detection technologies for accurate cell analysis. It measures stem cell, CAR-T cell, CAR-NK cell, the number of total cells, viable cells, non-viable cells and shows viability results.ADAM™ CellT complies 21 CFR part 11 which a regulation about electronic records and signatures for use in cGMP facilities. When 21 CFR Part 11 mode is activated, data cannot be modified by any user.Built-in tabletLess than 25 sec to get resultsAutomated image analysisWiFi (USB Dongle)Incl. AccuChip Kit4 TB extra storage for data backupMeasuring range:5 x 104 ~ 4 x 106 cells/ml
Automated cell counter ADAM™ MC2
The automated cell counter utilises sensitive fluorescence dye saining, LED optics and CMOS detection technologies for accurate cell analysis. It measures stem cell, CAR-T cell, CAR-NK cell, the number of total cells, viable cells, non-viable cells and shows viability results.Built-in tabletLess than 25 sec to get resultsAutomated image analysisWiFi (USB Dongle)Incl. AccuChip KitMeasuring range:5 x 104 ~ 4 x 106 cells/ml
Automated Cell Counter EVE™
EVE™ is a benchtop automatic cell counter designed to accurately and precisely measure cell count and viability of different cell cultures. It uses the standard trypan blue technique.Fine distinction of clumped cells: Accurate results with advanced analysis algorithmBroad range of cell sizes and types: Primary (tissue and blood) cell lines and stem cellsUser friendly: Touch screen LCD without any maintenance neededData store analysis: 500 test results, transfer to PC via USB driveCell size gating: Select range of cell size using gating functionEVE™ cell counting slides contain two enclosed chambers which can measure two different samples or perform replicates of the same sample.Scope of supply: Automated Cell Counter EVE™, one box of Cell Counting Slides (50 slides/100 counts), User Manual and Quick Manual.
Automated cell Counter EVE™ Plus
EVE™ Plus is a benchtop automatic cell counter designed to accurately and precisely measure cell count and viability of different cell cultures. It uses the standard trypan blue technique.Fine distinction of clumped cells: Accurate results with advanced analysis algorithmTouch screen interfaceAuto save function up to 500 resultsData transfer via Wi-FiAcoustic signal after each countSpecifications:Manual counting time:1 second or lessAuto focus counting time:10 seconds or lessMeasuring range:1 x 104 ~ 2 x 107cells / mlZählbarer Zellgrößenbereich:5 ~ 60 µm
Automatic flow regulator for product protection workbench SmartFAST
Automatic flow regulator with digital display and anemometer.
Base cabinet for cytostatic safety cabinets CytoFAST
Base cabinet with 3 drawers.
Base cabinet for microbiological safety cabinets SafeFAST Premium
Base cabinet with 3 drawers.
Biological safety cabinets Herasafe™ 2030i, class II
For demanding cell culture applications and other sensitive work requiring assured safety for product, personnel and environment.Interior made of stainless steel, with LED lightsGUI touchscreen interfaceSmartFlow plus auto compensationCross beam UV in side wallsElectronic front sash windowHinged front window for easy cleaning and disinfection of the interiorSloped front window allows fatigue free workingPadded, ergonomically adjustable armrests (optional)2 x Smart Ports for feeding trough vacuum tubes and cablesOne touch auto start / stop functionCloud ready data outputUSB data outputsEN 12469
Biopharmaceutical Tubing CFlex® Formulation 072
C-Flex® is a patented thermoplastic elastomer tubing specifically designed to meet the critical demands of pharmaceutical and biopharmaceutical applications for fluid processing.C-Flex® tubing for Biopharma Manufacturing is specifically designed for aseptic welding connections and sealing disconnection. C-Flex® is suitable for sterilization by gamma irradiation and autoclave. It is moldable, bondable and formable, ideal for single-use assemblies, such as tubing with bags manifolds.Features/Benefits: Sealable and weldable either pre- or post- sterilizationSterilizable by gamma irradiation and autoclaveComplies with USP Class VI and ISO standardsFull Validation Package available for all C-Flex commercial formulations.Moldable, bondable and formable for single use assemblies and overmoldsPyrogen-free, non-cytotoxic, non-hemolyticRemains flexible from -45°C to 135°CSignificantly less permeable than siliconeSmooth inner bore for superior fluid flowSafe disposable through incinerationAll formulas are Animal-Derived Component Free (ADCF)Single-use Applications:Aseptic sealing disconnectionsAseptic welding connectionsSterile dosing and fillingBuffer and media preparationCell culture operationsPurification operationsDiagnostics productsBiopharma manufacturingSingle-use fluid transfer setsSupplied in 15 m or 4,5 m coils.
Biopharmaceutical Tubing CFlex® Formulation 082
C-Flex® is a patented thermoplastic elastomer tubing specifically designed to meet the critical demands of pharmaceutical and biopharmaceutical applications for fluid processing.C-Flex® tubing for Biopharma Manufacturing is specifically designed for aseptic welding connections and sealing disconnection. C-Flex® is suitable for sterilization by gamma irradiation and autoclave. It is moldable, bondable and formable, ideal for single-use assemblies, such as tubing with bags manifolds.Features/Benefits: Sealable and weldable either pre- or post- sterilizationSterilizable by gamma irradiation and autoclaveComplies with USP Class VI and ISO standardsFull Validation Package available for all C-Flex commercial formulations.Moldable, bondable and formable for single use assemblies and overmoldsPyrogen-free, non-cytotoxic, non-hemolyticRemains flexible from -45°C to 135°CSignificantly less permeable than siliconeSmooth inner bore for superior fluid flowSafe disposable through incinerationAll formulas are Animal-Derived Component Free (ADCF)Single-use Applications:Aseptic sealing disconnectionsAseptic welding connectionsSterile dosing and fillingBuffer and media preparationCell culture operationsPurification operationsDiagnostics productsBiopharma manufacturingSingle-use fluid transfer setsSupplied in 15 m or 4,5 m coils.
Biopharmaceutical Tubing CFlex® Formulation 374
C-Flex® is a patented thermoplastic elastomer tubing specifically designed to meet the critical demands of pharmaceutical and biopharmaceutical applications for fluid processing.C-Flex® tubing for Biopharma Manufacturing is specifically designed for aseptic welding connections and sealing disconnection. C-Flex® is suitable for sterilization by gamma irradiation and autoclave. It is moldable, bondable and formable, ideal for single-use assemblies, such as tubing with bags manifolds.Features/Benefits: Sealable and weldable either pre- or post- sterilizationSterilizable by gamma irradiation and autoclaveComplies with USP Class VI and ISO standardsFull Validation Package available for all C-Flex commercial formulations.Moldable, bondable and formable for single use assemblies and overmoldsPyrogen-free, non-cytotoxic, non-hemolyticRemains flexible from -45°C to 135°CSignificantly less permeable than siliconeSmooth inner bore for superior fluid flowSafe disposable through incinerationAll formulas are Animal-Derived Component Free (ADCF)Single-use Applications:Aseptic sealing disconnectionsAseptic welding connectionsSterile dosing and fillingBuffer and media preparationCell culture operationsPurification operationsDiagnostics productsBiopharma manufacturingSingle-use fluid transfer setsSupplied in 15 m or 4,5 m coils.
Bioreactors CELLine™, adherent, pack of 1
Membrane driven flasks for high density cell culture. The flasks are designed to enhance small scale bio-production for antibodies and proteins. Conventional in vivo or in vitro cell culture methods can be laborious, may have low cell density and require significant purification. CELLine™ flasks address these three areas of limitation observed in static tissue culture flasks.Disposable and ready-to-useHigh cell density and high product concentrationReduces operation timeDecreases use of consumablesSpace saving, and stackableMembrane driven flasks for high density cell culture. The flasks are designed to enhance small scale bio-production for antibodies and proteins. Conventional in vivo or in vitro cell culture methods can be laborious, may have low cell density and require significant purification. CELLine™ flasks address these three areas of limitation observed in static tissue culture flasks.Disposable and ready-to-useHigh cell density and high product concentrationReduces operation timeDecreases use of consumablesSpace saving, and stackable
Bioreactors CELLine™, adherent, pack of 3
Membrane driven flasks for high density cell culture. The flasks are designed to enhance small scale bio-production for antibodies and proteins. Conventional in vivo or in vitro cell culture methods can be laborious, may have low cell density and require significant purification. CELLine™ flasks address these three areas of limitation observed in static tissue culture flasks.Disposable and ready-to-useHigh cell density and high product concentrationReduces operation timeDecreases use of consumablesSpace saving, and stackableMembrane driven flasks for high density cell culture. The flasks are designed to enhance small scale bio-production for antibodies and proteins. Conventional in vivo or in vitro cell culture methods can be laborious, may have low cell density and require significant purification. CELLine™ flasks address these three areas of limitation observed in static tissue culture flasks.Disposable and ready-to-useHigh cell density and high product concentrationReduces operation timeDecreases use of consumablesSpace saving, and stackable
Bioreactors CELLine™, suspension, pack of 1
Membrane driven flasks for high density cell culture. The flasks are designed to enhance small scale bio-production for antibodies and proteins. Conventional in vivo or in vitro cell culture methods can be laborious, may have low cell density and require significant purification. CELLine™ flasks address these three areas of limitation observed in static tissue culture flasks.Disposable and ready-to-useHigh cell density and high product concentrationReduces operation timeDecreases use of consumablesSpace saving, and stackableMembrane driven flasks for high density cell culture. The flasks are designed to enhance small scale bio-production for antibodies and proteins. Conventional in vivo or in vitro cell culture methods can be laborious, may have low cell density and require significant purification. CELLine™ flasks address these three areas of limitation observed in static tissue culture flasks.Disposable and ready-to-useHigh cell density and high product concentrationReduces operation timeDecreases use of consumablesSpace saving, and stackable
Bioreactors CELLine™, suspension, pack of 3/5
Membrane driven flasks for high density cell culture. The flasks are designed to enhance small scale bio-production for antibodies and proteins. Conventional in vivo or in vitro cell culture methods can be laborious, may have low cell density and require significant purification. CELLine™ flasks address these three areas of limitation observed in static tissue culture flasks.Disposable and ready-to-useHigh cell density and high product concentrationReduces operation timeDecreases use of consumablesSpace saving, and stackableMembrane driven flasks for high density cell culture. The flasks are designed to enhance small scale bio-production for antibodies and proteins. Conventional in vivo or in vitro cell culture methods can be laborious, may have low cell density and require significant purification. CELLine™ flasks address these three areas of limitation observed in static tissue culture flasks.Disposable and ready-to-useHigh cell density and high product concentrationReduces operation timeDecreases use of consumablesSpace saving, and stackable
Biosafety cabinets Maxisafe™ 2030i
For CMR substances (carcinogenic, mutagenic, reprotoxic) and other work requiring assured safety for product, personnel and environment. Each device has an integrated WLAN function and can be connected immediately.Interior made of stainless steel, with LED lightsGUI touchscreen interface SmartFlow plus auto compensationCross beam UV in side wallsPadded, ergonomically adjustable armrests (optional)2 x Smart Ports for feeding trough vacuum tubes and cablesCloud ready data outputEN 12469 and DIN 12980
Bottle InVitro™ Biotainer™ Nalgene™, Type 3030, 3120, 3233, 3405, 3410, 3423, PC, sterile
Light blue, with PP screw cap with silicone seal. Providing safe storage from -100 to 99 °C. With printed graduations in ml. With ribbed hand-grips (except 125 ml and 5000 ml). Meets USP 87, 88 and are tested for pyrogenicity.* with PE-handle.
Bottle InVitro™ Biotainer™ Nalgene™, Type 3750, 3751, HDPE, sterile
Leakproof bottle with PP screw cap, suitable for freezing and storing biological reagents from -100 °C to 99 °C. 38 mm closure is silicone lined. 3.9 L overflow volume. Black printed graduations in ml to 3000 ml. Space saving square shape and convenient handle. Meets current USP 87, 88. Pyrogen-free.* with heat shrink tape sealed.
Bottle top filter, PS, sterile, PES membrane
For sterile filtration of culture media, buffers and reagents.With graduationInclined hose connectorSterilized by irradiation, SAL 10-6DNase/RNase-free, pyrogen freeGL45
Bottle Top Filters Nalgene™ Rapid-Flow™, PES Membrane, sterile
Filters securely screw onto glass media bottles with 33 mm or 45 mm neck sizes. Allows direct filtration of liquid into sterile glass media bottles.Tight and secure thread connection for vacuum filtration, vacuum tubing to be connected onto tubing adapter of side-arm. Graduated. Certificate of quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Bottle Top Filters Nalgene™ Rapid-Flow™, SFCA Membrane, sterile
Tissue culture filters for screw fitting onto bottles with 33mm or 45mm neck diameters. With surfactant-free, cellulose acetate membrane (SFCA) and polystyrene (PS) housing. Gamma-irradiated sterile. Pyrogen-free. Non cytotoxic. Low-pressure filtration can be carried out directly into a suitable sterile bottle. Caution: Only use sterile bottles authorised for use in low pressure applications. Always wear protective equipment for low pressure procedures. The membrane is characterised by its low protein binding, good throughput rates and minimal clogging with negligible protein loss. Permanent, moulded graduations. Quick-disconnection tubing adaptor with cellulosic vent plug for tubing with an internal diameter of 6mm to 9mm. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Bottle Top Filters Nalgene™, PSU, without membrane
Non-toxic. Robust body. Suitable for pressure filtration up to 600 mbar and vacuum filtration. With seal, cap and tubing adapter. Autoclavable.
Bottle-top filters, Sartolab® BT, PES membrane
Sterile vacuum filters for screwing directly onto sterile bottles. Disposable units for sterile filtration of media and aqueous solutions. The special polyethersulphone (PES) membrane produces extremely good throughput times and low protein binding, making it ideal for cell culture applications. With GL45 screw connection for all standard bottles.Caution: Only use sterile bottles authorised for use in low pressure applications.
BRANDplates® Insert System, cellGrade™ plus, smooth walled
Sterile. For manual and automated cell and tissue culture work.For standard applications like secretion studies, co-cultivations, chemotaxis tests, etc.Hydrophilic cell culture surfaceStrips of 4 inserts, divisibleHanging inserts – distance between the well base and insert membrane is 4 mmBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic