Accessories to Cell Culture Flasks DURAN® TILT
The DURAN® TILT Light Shield is a removable white silicone sleeve that covers 94% of the bottle surface. The sleeve blocks damaging ultraviolet light, protects the glass surface from damage, and facilitates safer handling.The DURAN® GL 56 Bottle Tags can be used for individual colour coding or for fixing the light shield to the bottle.DURAN® bottle top vacuum filtration units for use with the TILT bottle (using an adaptor) or 45 mm media bottles. Manufactured in a Class 100,000 Cleanroom from Class VI non-cytotoxic materials. Supplied sterile.Re-usable DURAN® GL 56 filter adaptor allows the use of the TILT bottle with standard 45 mm bottle top filtration units. Manufactured from inert PTFE.DURAN® TILT GL 56 self-adhesive cap labels can be used to clearly indicate the separate bottles of media for each cell line, or types of media.
AccuChip Kits
For ADAM™ MC 2 and CellT. The AccuChip Kits consist of 200 slides (4 channel) and AccuStain Solution T (2 bottles x 12.5 ml). The AccuStain Solution T is composed of fluorescent dye propidium lodid (PI) and lysis solution.
AccuSeal Semi-Automated Plate Sealer
Accepts a wide range of microplates and heat sealsUser-friendly control systemLarge digital display shows all operating parametersAdjustable sealing temperature: 100°C to 190°C, or no heatPrecise temperature, timing and pressure for consistent sealingSpecificationsDimensions (W x D x H):171mm x 324mm x 362mmWeight:12kgSealing Temperature:Off, 100 to 190°C (increments of 1.0°C)Temperature Accuracy:±1.0°CTemperature Uniformity:±1.0°CSealing Time:0.5 to 10 sec (incements of 0.1 sec)Compatible Plate Materials:PP (Polypropylene), PS (Polystyrene), PE (Polyethylene)Compatible Plate Types:Standard Assay Plates, Deep-Well Storage plates, PCR Plates (Non-Skirted, Semi-Skirted, Full-Skirted)Maximum Plate Height:45mmCompatible Sealing Film Types:Foil Polypropylene laminate, Clear Polyester-polypropylene laminate, Clear polymer, Thin clear polymer, Foil-laminate, Foil
Adapter sets for Aspirator FTA-1 / FTA-2i
Scope of supply:HAS-1: Handheld vacuum controller, 1-channel adapter (with ejector) for 200 µl tips, 1-channel adapter with 125 mm stainless steel pin, 1-channel adapter with 40 mm stainless steel pin, 8-channel adapter (with ejector) for 200 µl tips, 8-channel adapter with 35 mm stainless steel pin, SH-6 standMA-8: Tube adaptor, 8 channel aspiration tip, 8 channel tip holder
Additional HEPA filter for safety cabinets SafeFAST Premium and CytoFAST
HEPA filter without collar.
Agarose for gel electrophoresis
This agaroses are suitable for routine analysis of nucleic acids. They combine tensile strength with low electroendoosmotic effects to achieve high resolving power for a wide size range of nucleic acid fragments. AG agaroses are also very environmentally friendly, being manufactured by a process which excludes organic solvents. Also available as low melting point agarose for nucleic acid recovery and enzymatic applications (Cat. No. 4.658 455) and as High Resolution PCR grade agarose for separation of small DNA fragments of up to 800 bp (Cat. No. 6.270 615). Other packing sizes on request.SpecificationsAG | LMA | HRACAS: Appearance:9012-36-6 | 39346-81-1 | 39346-81-1 White to off-white powderEEO:≤ 0,13 % | ≤ 0,1 % | ≤ 0,1%Gelling Point:36 °C ±1,5°C (1,5 % gel) | 26-30 °C (1,5 % gel) | ≤ 33 °C (1,5 % gel)Melting Point:88 °C ±1,5°C (1,5 % gel) | ≤ 65 °C (1,5 % gel) | ≤ 70 °C (1,5 % gel)Solubility:Clear, colourless solution at 1g in 100ml waterMoisture: 10 %Gel Strength:≥ 1200 g/cm2 (1% gel) | ≥ 200 g/cm² (1% gel) | ≥ 750 g/cm² (1,5% gel)Sulphate: 0,20 % | ≤ 0,1 % | ≤ 0,1 %DNase, RNase, Protease, Endonuclease:None Detected
Agarose gel electrophoresis workflow package choicePACK
Complete package for routine applications of agarose gel electrophoresis in the laboratory.Electrophoresis tank multiSUB Choice offers a selection of 3 gel tray sizes (15 x 7 cm, 15 x 10 cm and 15 x 15 cm) and can thus be used flexiblyPower supply PowerPro can be operated in constant mode or programmed and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Choice TRIO, power supply PowerPro 300, UV fluorescent ruler, UV gel scoop (15 cm), agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (50 x 1 l)
Agarose gel electrophoresis workflow package miniPACK
Starter package for working with small agarose gels in the laboratory.Electrophoresis tank multiSUB Midi can process up to 100 samples and each platinum electrode is recessed in a removable cassette to protect it from damagePower supply PowerPro can be operated in constant mode or programmed and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Midi DUO, power supply PowerPro 300, UV fluorescent ruler, UV gel scoop (10 cm), agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (50 x 1 l)
Agarose gel electrophoresis workflow package screenPACK
Starter package for working with agarose gels with high sample throughput in the laboratory.Electrophoresis tank multiSUB Screen offers a selection of 3 gel tray sizes (26 x 16 cm, 26 x 24 cm and 26 x 32 cm) and is equipped with buffer recirculationPower supply PowerPro can operate agarose gels at up to 500 V and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Screen TRIO, power supply PowerPro 500, UV fluorescent ruler, UV gel scoop (26 cm), agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (50 x 1 l)
Aluminium caps, pure aluminium
Matt finish. Without internal clips. Loose-fit caps for sterile, but not hermetically sealing, closure of culture flasks and other containers. Can also be used as open specimen holders. Autoclavable.
Anaerobic jars, stainless steel
For the cultivation of anaerobic and microaerophilic microorganisms in a defined and rapidly generated gas atmosphere.The requested atmosphere may be reached under ideal conditions by two methods. Either by using chemical gas packs (anaerobe systems) or by manually evacuating the jars with a vacuum pump and flushing with gas afterwards (e.g. with nitrogen), in this case no chemical accessories are needed (except anaerobic jar eco and crystal eco). The jars are made of robust stainless steel or transparent PC.The lids are made of UV-resistant plastic or transparent polycarbonate with two corner valves incl. tube clips for vacuum hoses (5 mm i.d.) and with manometer for exact control of the vacuum or overpressure from -1 to 0.2 bar (except anaerobic jar eco and crystal eco). The optional racks are made of stainless steel providing holders for comfortable operation of the anaerobe systems.Methods for reaching anaerobic conditions: 3 x times evacuating and filling gas, flushing with gas for 5 minutes and chemical gas production (GasPacks) for Anaerobic jars "small", "standard", "large" and "crystal". For Anaerobic jar "eco" flushing with gas for 5 minutes (Using GasPack-Kits).Customized: Other equipment available upon request. Examples: customized lids, e.g. made of special or heat-resistant materials e.g. stainless steel, heat-resistant pressure gauges (up to 100 °C), also without cocks / manometer available.*Stainless steel jar with UV-resistant plastic lid (2 valves, 1 manometer)**Stainless steel jar with UV-resistant plastic lid (ventilation screw)***Transparent polycarbonate jar and lid (2 valves, 1 manometer)****Polycarbonate jar with UV-resistant plastic lid (ventilation screw)
Antibiotic test papers
Recommended for identification of pathogens of infectious diseases by determination of the degree of resistance against antibioticsMade from ultrapure raw materials, entirely without additives to ensure that no inhibition will occur during the incubationConsistent thickness and absorption volumeAvailable as small circles, even individually printed on one or both sidesMeet the directive for carriers for active agents acc. to DIN 58940-2Further sizes on request
Arm supports for safety cabinets SafeFAST and CytoFAST
Arm supports allow fatigue-free working and prevent blocking of the front vents.
Aspirator FTA-1
Designed for routine aspiration of the supernatent alcohol/buffer from the walls of microtubes during DNA/RNA purification and other macromolecule reprecipitation techniques.Fitted with hydrophobic microbiological filterThe hydrophobic microbiological suction filter eliminates risk of contamination from the trap flask. Efficiency up to 99.9 %, holds particles bigger than 0.027 micron, which are smaller than agents of Hepatitis A, B and C.Polyethylene tube connects collecting tip to the trapping flaskBuilt-in micro-compressor creates negative pressure in trapping flask for removal of liquid from microtubesScope of supply: Aspirator system with integrated pump, trap flask, aspiration tip and tube holders for 2 tubesSpecificationsAspiration rate:up to 10 l/minFlow rate:72 ml/min with collecting tip 666 ml/min without collecting tipPower supply:120 ... 230 VAC, 50/60 HzSpecificationsVolume Trap flask:1 lVacuum range:500 mbarDimensions (W x D x H):160 x 210 x 340 mmWeight:1.7 kg
Aspirator FTA-2i
Designed for routine aspiration of the supernatent alcohol/buffer from the walls of microtubes during DNA/RNA purification and other macromolecule reprecipitation techniques.Fitted with hydrophobic microbiological filterThe hydrophobic microbiological suction filter eliminates risk of contamination from the trap flask. Efficiency up to 99.9 %, holds particles bigger than 0.027 micron, which are smaller than agents of Hepatitis A, B and C.Polyethylene tube connects collecting tip to the trapping flaskBuilt-in micro-compressor creates negative pressure in trapping flask for removal of liquid from microtubesScope of supply: Aspirator system with integrated pump and trap flaskSpecificationsAspiration rate:up to 10 l/minFlow rate:72 ml/min with collecting tip 666 ml/min without collecting tipPower supply:120 ... 230 VAC, 50/60 HzSpecificationsVolume Trap flask:2 lVacuum range:200 ... 800 mbar (adjustable)Dimensions (W x D x H):185 x 290 x 390 mmWeight:1.85 kg
Aspirator LLG-uniVACUUSYS
LLG-uniVACUUSYS Vacuum Aspiration System with integrated vacuum pump and vacuum controller is ideally suited for aspirating liquids in Life Science applications, e.g. the removal of media from cell cultures, aspiration of supernatants after centrifugation, or the removal of wash solutions from Immuno assay plates. The set vacuum is automatically re-adjusted in case of deviations.Integrated vacuum pump with vacuum controlEasy to useSelf-closing connectors for quick installation and prevention of liquid or aerosol escapeLiquid level sensor, prevents liquid overflowAutoclavable waste collection bottle and nozzlePlease order compatible 4l replacement bottle with 7.048 064.Scope of supply: Vacuum Aspiration System with integrated vacuum pump, 4 liter waste collection bottle, single channel needles and 8-channel needle aspirator handles, single channel and 8-channel adaptor for 200 µl pipette tips, single channel adaptor for 1000 µl pipette, tubing and quick-connectorsSpecificationsVacuum range:300 ... 600 mbar (adjustable)Aspiration rate:1 ... 15 ml/sNoise emission:50 dB(A)Dimensions (W x D x H):180 x 320 x 530 mmWeight:3.4 kgPower supply:100 ... 240 V, 50/60 HzWarranty:3 years
Automated cell counter ADAM™ CellT
The automated cell counter utilises sensitive fluorescence dye saining, LED optics and CMOS detection technologies for accurate cell analysis. It measures stem cell, CAR-T cell, CAR-NK cell, the number of total cells, viable cells, non-viable cells and shows viability results.ADAM™ CellT complies 21 CFR part 11 which a regulation about electronic records and signatures for use in cGMP facilities. When 21 CFR Part 11 mode is activated, data cannot be modified by any user.Built-in tabletLess than 25 sec to get resultsAutomated image analysisWiFi (USB Dongle)Incl. AccuChip Kit4 TB extra storage for data backupMeasuring range:5 x 104 ~ 4 x 106 cells/ml