LLG-Test and centrifuge tubes with rim, PS
Ideal for all laboratory applications in the intermediate volume range up to 12 ml, such as incubation, centrifugation or sample preparation.Tube made of transparent PS or opaque PPRound bottomGraduatedLarge writing areaMax. temperature 80 °CPlease order matching Dual-Position caps separately.
LLG-Transfer membrane, supported nitrocellulose
Supported Nitrocellulose transfer membranes combine the binding characteristics of nitrocellulose membranes with the strength of nylon membranes. These membranes are used for DNA/RNA transfers requiring low background or for multiple hybridizations. For use with chemiluminescence and radiographic detection systems. BSA binding capacity up to 100 µg/cm2.The safety data sheets of these products are available under www.llg-labware.com.
Loop steriliser SteriMax basic
For rapid sterilisation of inoculation loops using infrared technology. Instantly ready for use without warm-up. Sterilisation at 750 to 1000 °C. Suitable for all laboratories, anaerobic working environments and laminar flow cabinets.Instantly ready to work without any unnecessary warm-upHeating tube made of special quartz glassSimple cleaning of the device and the heating tubeSterilisation tube closed on one side to prevent contaminationWith timerEasy to cleanNo danger of combustion on the housing (Cool-Touch)Efficient use of energyTested and certified for photobiological safety in accordance with EN 62471 by the BG ETEM - Risk-free for skin and eyesRobust housing made of stainless steel and safety glassCan be operated directly on the touch panel of the device or via optional foot pedalFast and efficient, the sterilisation process takes only 10 secondsScope of supply: SteriMax basic, mains cable, 1 x Inoculation loop Ø 3 mm, 1 x Inoculation loop holder, power cableSpecificationsTemperatur range:750 ... 1000 °CPower consumption:600 WDimensions (W x D x H):110 x 180 x 170 mmWeight:1,8 kgPower supply:220 - 240 V, 50/60 HzIP code:IP 20
Loop Steriliser SteriMax smart
For rapid sterilisation of inoculation loops using infrared technology. Instantly ready for use without warm-up. Sterilisation at 750 to 1000 °C. Suitable for all laboratories, anaerobic working environments and laminar flow cabinets.Instantly ready to work without any unnecessary warm-upHeating tube made of special quartz glassSimple cleaning of the device and the heating tubeSterilisation tube closed on one side to prevent contaminationWith timerEasy to cleanNo danger of combustion on the housing (Cool-Touch)Efficient use of energyTested and certified for photobiological safety in accordance with EN 62471 by the BG ETEM - Risk-free for skin and eyesRobust housing made of stainless steel and safety glassAuto-Start through touchless IR-Sensor technologyTouch operationAdjustable sterilisation and cool-down timers for two usersScope of supply: SteriMax smart, 2 x quartz glass heating tubes, inoculation loop holder, inoculation loop (diam. 3 mm), holding device for 3 inoculation loops, power cableSpecificationsTemperatur range:750 ... 1000 °CPower consumption:600 WDimensions (W x D x H):110 x 180 x 170 mmWeight:1,8 kgPower supply:220 - 240 V, 50/60 HzIP code:IP 20
Loop Sterilizer schuett solaris
Sterilisation with light. Sterilisation of inoculating loops, tweezers and small instruments within seconds.Sturdy and maintenance-freeNo gas, no open flame - Works with standard electrical powerIntuitive, easy to useInstant, ready-to-use, no warm-up time, no waitingSterilization temperature: 900 to 1300°CTouch-free START, with IR- sensor and adjustable timer (5 to 7 seconds)For use in Laminar Flow CabinetsIdeal for mobile operation in the fieldThe schuett solaris is the perfect solution if an open flame should be avoided or gas cartridges etc. are not available. Used with standard electrical power. Reaches the safe working temperature of 900 to 1300°C within a split second. No excess heat, no energy consumption between work cycles. START is generated by an infra-red sensor, which allows for efficient one-handed operation. Pathogenic material is kept inside the sterilization chamber. No spreading, no splashing. Working angle adjustment (4-steps).Scope of supply: schuett solaris inoculation loop sterilizer, 2 x quartz glass tubes, 1 x inoculation loop holder with inoculation loop (sample)SpecificationsDimensions (W x D x H):152 x 195 x 210mmWeight:approx. 2500g
Luminometer Clean-Trace™ LM1
Simple, quick and reliable hand held diagnostic tool to verify cleaning effectiveness and capture, store and manage data for later analysis.Re-engineered for improved precision and accuracyEasy to use and faster time to resultRobust for the Manufacturing EnvironmentSystem includes the Clean-Trace® Luminometer and Clean-Trace® Hygiene Monitoring and Management Software to help you monitor testing results over timeErgonomic Design for Simple One-handed operationWireless Data Transfer23 languages for multilingual pre-production teamsRobust to provide consistent results across temperaturesNew software has easy-to-use dashboard that immediately turns data into actionable information.
Magnetic filter funnels Sentino™, Polyphenylsulfone (PPSU)
The filter funnels are graduated and have a leak-proof magnetic closure that enables one-handed operation. The funnels are robust, shatterproof, and can withstand several autoclave cycles. Suitable for Ø 47 mm membrane filters. Designed for use with the microbiology pump Sentino™.
Magnetic filter funnels, Polyphenylsulfone (PPSU)
The filter funnels are graduated and have a leak-proof magnetic closure that enables one-handed operation. The funnels are robust, shatterproof, and can withstand several autoclave cycles. Suitable for Ø 47 mm membrane filters. Including rubber stopper no. 8.
Magnetic filter funnels, Polyphenylsulfone (PPSU), with lid
The filter funnels are graduated and have a leak-proof magnetic closure that enables one-handed operation. The funnels are robust, shatterproof, and can withstand several autoclave cycles. Suitable for Ø 47 mm membrane filters. Including rubber stopper no. 8.
Magnetic footrest bar for microbiological safety cabinets SafeFAST Premium
Inclined footrest for better posture with anti-slip coating.Adjustable heightChemical resistant
Magnifying lens for Scan® 50, Scan® 50 pro and Scan® 100
Magnifying lens with flexible arm.
Main filter cover for cytostatic safety cabinets CytoFAST
Main filter cover when using a perforated work surface.
Manual Heat Sealer for Microplates ALPS 50V
The ALPS 50V provides a safe, controlled method of sealing sample plates made from various plastics. The sealer is adjustable for both sealing time and temperature and gives a visual countdown display during the sealing process. The ALPS 50V can seal deep well plates (Bioblocks) with various thermal sealing plastic or foil films and may be adapted to seal Microplates and PCR plates by using a suitable plate carrier.SpecificationTemperature Set Point Range:125 to 200 °C in 1 °C incrementsTime Set Range:1 to 9 sec. in 0.5 sec. incrementsOperating Humidity Range:20 to 80 % non-condensingOperating Temperature:18 to 30 °CSize (W x D x H):220 x 321 x 425 mmWeight:7.2 kgPower Supply:IEC 320, 100-130 VAC, 50/60 Hz or 220-240 VAC, 50/60 Hz, max. 350 WStandards:FCC Class A, CFR 47 Part 15 BS EN 61326:1998
Manually adjustable bases for Thermo Scientific™ Safety cabinets
Manually adjustable bases for 750 to 950 mm working height in 50 mm incrementsHeight means working height.
Masson trichrome stain kit Richard-Allan Scientific™
The stain kit facilitates the differentiation of collagen and smooth muscle tissue in tumours and helps to detect connective tissue diseases, as well as changes in muscle tissue.Staining result: cytoplasm, keratin and muscle fibres are stained red, collagen and mucin are stained blue and cell nuclei are stained black
Media bottles Nalgene™, PET, square, sterile
Transparent bottles with HDPE screw cap. Ideal for storing and transporting liquid media, buffers and sera.With graduationLow permeability to CO2 / O2LeakproofGamma-sterilisedPyrogen-freeNon-cytotoxicComply with US Pharmacopeia USP Class VI guidelines
Media Bottles Nalgene™, PETG, square, with screw cap, HDPE
Clear. For the storage of pH-sensitive liquids, such as culture media.Gamma-sterilizedPyrogen-freeNon cytotoxicBreak-resistantLeakproofPermanent graduationReduced permeability of CO2 and O2USP class VI
Media Bottles Nalgene™, PETG, square, with septum seal, Silicone / PTFE
Clear. For packaging biological and diagnostic reagents that have to be filled sterile or for adding additives via syringes. For clean room applications, on plastic carriers, double sealed in plastic bags.Non cytotoxicRobust and break-resistantLeakproofUSP class VI
Media Bottles Nalgene™, PETG, sterile
Suited for biopharmaceutical processing and storage of critical reagents and bulk intermediates such as vaccine and protein therapeutic preparations. Manufactured in a certified ISO 14644-1 Class 7 cleanroom. Containers are lot certified to comply with particulate limits specified in USP <788>, EP 2.9.19, and JP 14th ed. Part 1, Section 24. Packaging is designed for cleanroom applications. Bottle and closure are secured with a tamper-resistant heat-shrink band and packaged in heat-sealed bags to support cleanroom operations. USP Class VI, EP Modified Abnormal Toxicity, and USP <661> physicochemical tests compliant. Bottles meet the requirements for USP Class VI, EP Modified Abnormal Toxicity Test, are non-cytotoxic, pyrogen-free, non-hemolytic, and comply with USP <661> physicochemical guidelines. Resins are free of animal derived components (ADCF). Leakproof.
Media taps for Thermo Scientific™ Safety cabinets
G3/8 connection with long neck. For installation in the side wall. Suitable for all cabinet sizes.Please order the matching solenoid valve (Cat. No. 4. 009 936) for use with the tap for combustible gases separately.
Membrane Filter Microsart® @filter units, CN
Microsart® @filter 100 and 250 filter units are a sterile and ready-to-use combination of funnel made of PP with 47 mm diameter, filter base and gridded membrane in one unit. They have been specifically developed for the detection and enumeration of microorganisms in pharmaceuticals, cosmetics, food, beverages, water and other liquids. The membrane filters can also be used in conjunction with Sartorius Stedim Biotech nutrient board discs.
Membrane filter Nalgene™, cellulose nitrate
Suitable for bacteriological analysis of drinking, dirty and natural water by membrane filtration method.White with black gridSterile
Membrane filters Type 130, cellulose nitrate
Gray membrane (after wetting, black) with white grid, for detection of yeasts and molds, particle count and microscopy, individually, sterile packaged / non sterile.Other types available on request.