12/40/168-well PCR Rack, PP
Removable hinged lid fits both sides. Flip this polypropylene reversible rack to the size of tubes you need. PCR side of the rack has 168 wells that hold 0.2ml tubes. The wells accommodate 8- or 12-tube strips or individual tubes. The opposite side of the rack has 40 wells that hold 0.5ml tubes. Both sides of the rack have 12 wells for 1.5ml tubes. Dimensions (L x W x H): 206 x 131 x 54mm. Autoclavable.
24/48-well PCR plates, non-skirted, PP
Ultra-thin wall design facilitates rapid and steady heat transfer. Smooth interior tube surface minimises binding of enzymes and nucleic acids. Raised rims of wells protect against cross-contamination and provide tight seal particularly in combination with new sealing mats. The 24/48 well plates reduce material costs and allow work on a compact PCR plate even with small sample throughputs.Suitable for most types of standard thermal cyclersBIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
32-well PCR rack, PP
For sampling and storage of PCR tubes. This rack accommodates individual 0.2 ml tubes, strips of 8, as well as 32-place assay plates (8x4).With removable, hinged lidEmbossed numbers and letters for easy identificationStackableAutoclavable
96 well PCR plates FrameStar®
Thin-walled polypropylene wellsRigid polycarbonate frameWith edge (skirted)StackableFree from DNase, RNase, human DNA, endotoxin and pyrogen
96-well PCR plates, PP, non-skirted
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well non-skirted PCR plates are suitable for most commercially available thermocyclers.
96-well PCR plates, PP, non-skirted, with elevated well rim
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well non-skirted PCR plates are suitable for most commercially available thermocyclers.
96-well PCR plates, PP, raised half frame
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well semi-skirted PCR plates can easily be labelled or tagged with a barcode.
96-well PCR plates, PP, semi-skirted
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well semi-skirted PCR plates can easily be labelled or tagged with a barcode.
96-well PCR plates, PP, semi-skirted, for Roche® LightCycler® 480
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well semi-skirted PCR plates can easily be labelled or tagged with a barcode.
96-well PCR plates, PP, semi-skirted, with elevated well rim
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well semi-skirted PCR plates can easily be labelled or tagged with a barcode.
96-well PCR plates, PP, skirted
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well skirted PCR plates are especially rigid, and are optimally suited for use with automatic pipetting systems and for being transported.
96-Well PCR Rack, PP
Removable hinged lid lies flat. Perfect for pre- or post-PCR sampling. Sturdy polypropylene rack accommodates individual 0.2ml tubes or strips of 8 or 12 tubes. Tube wells are easily identified with embossed numbers and letters. Autoclavable.
96-Well PCR Rack, PP
Manufactured from high density polypropylene which is fully autoclavable. Excellent rack for "before" and "after" PCR sampling.This rack can be used alone or inserted in the workstation.This working/storage rack is designed to accommodate 96 pieces 0.2 ml PCR tubes or strips of 8 and 12 tubes.Tube wells are easly identified with alphanumeric,embossed numbers and letters.Translucent clear cover protects the tubes from dust and has a non-slip surface to allow safe storage of multiple racks.Dimensions (W x D x H): 125 x 88 x 31 mm
96-Well PCR® Rack, Low-Temp
The PCR® rack base is made from robust ABS construction, and the lid is made from PC. Versatile Rack for use on a bench top or for freezer storage.Storing of tubes down to -80 °CHolds 0.2 ml individual tubes or stripsAmbidextrousDetachable lidStackable
Accessories for Gel Electrophoresis Tank MultiSUB Choice
MC = Multichannel compatible with consecutive loading.MCSS = Multichannel compatible with alternated loading - every second well
Accessories for Gel Electrophoresis Tank MultiSUB Maxi
MC = Multichannel compatible with consecutive loading.MCSS = Multichannel compatible with alternated loading - every second well.
Accessories for Gel Electrophoresis Tank MultiSUB Midi
MC = Multichannel compatible with consecutive loading.
Accessories for Gel Electrophoresis Tank MultiSUB Midi-96
MC = Multichannel compatible with consecutive loading.
Accessories for Gel Electrophoresis Tank MultiSUB MiniRapide
MC = Multichannel compatible with consecutive loading.
AccuSeal Semi-Automated Plate Sealer
Accepts a wide range of microplates and heat sealsUser-friendly control systemLarge digital display shows all operating parametersAdjustable sealing temperature: 100°C to 190°C, or no heatPrecise temperature, timing and pressure for consistent sealingSpecificationsDimensions (W x D x H):171mm x 324mm x 362mmWeight:12kgSealing Temperature:Off, 100 to 190°C (increments of 1.0°C)Temperature Accuracy:±1.0°CTemperature Uniformity:±1.0°CSealing Time:0.5 to 10 sec (incements of 0.1 sec)Compatible Plate Materials:PP (Polypropylene), PS (Polystyrene), PE (Polyethylene)Compatible Plate Types:Standard Assay Plates, Deep-Well Storage plates, PCR Plates (Non-Skirted, Semi-Skirted, Full-Skirted)Maximum Plate Height:45mmCompatible Sealing Film Types:Foil Polypropylene laminate, Clear Polyester-polypropylene laminate, Clear polymer, Thin clear polymer, Foil-laminate, Foil
Agarose for gel electrophoresis
This agaroses are suitable for routine analysis of nucleic acids. They combine tensile strength with low electroendoosmotic effects to achieve high resolving power for a wide size range of nucleic acid fragments. AG agaroses are also very environmentally friendly, being manufactured by a process which excludes organic solvents. Also available as low melting point agarose for nucleic acid recovery and enzymatic applications (Cat. No. 4.658 455) and as High Resolution PCR grade agarose for separation of small DNA fragments of up to 800 bp (Cat. No. 6.270 615). Other packing sizes on request.SpecificationsAG | LMA | HRACAS: Appearance:9012-36-6 | 39346-81-1 | 39346-81-1 White to off-white powderEEO:≤ 0,13 % | ≤ 0,1 % | ≤ 0,1%Gelling Point:36 °C ±1,5°C (1,5 % gel) | 26-30 °C (1,5 % gel) | ≤ 33 °C (1,5 % gel)Melting Point:88 °C ±1,5°C (1,5 % gel) | ≤ 65 °C (1,5 % gel) | ≤ 70 °C (1,5 % gel)Solubility:Clear, colourless solution at 1g in 100ml waterMoisture: 10 %Gel Strength:≥ 1200 g/cm2 (1% gel) | ≥ 200 g/cm² (1% gel) | ≥ 750 g/cm² (1,5% gel)Sulphate: 0,20 % | ≤ 0,1 % | ≤ 0,1 %DNase, RNase, Protease, Endonuclease:None Detected
Agarose gel electrophoresis workflow package choicePACK
Complete package for routine applications of agarose gel electrophoresis in the laboratory.Electrophoresis tank multiSUB Choice offers a selection of 3 gel tray sizes (15 x 7 cm, 15 x 10 cm and 15 x 15 cm) and can thus be used flexiblyPower supply PowerPro can be operated in constant mode or programmed and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Choice TRIO, power supply PowerPro 300, UV fluorescent ruler, UV gel scoop (15 cm), agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (50 x 1 l)
Agarose gel electrophoresis workflow package miniPACK
Starter package for working with small agarose gels in the laboratory.Electrophoresis tank multiSUB Midi can process up to 100 samples and each platinum electrode is recessed in a removable cassette to protect it from damagePower supply PowerPro can be operated in constant mode or programmed and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Midi DUO, power supply PowerPro 300, UV fluorescent ruler, UV gel scoop (10 cm), agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (50 x 1 l)
Agarose gel electrophoresis workflow package screenPACK
Starter package for working with agarose gels with high sample throughput in the laboratory.Electrophoresis tank multiSUB Screen offers a selection of 3 gel tray sizes (26 x 16 cm, 26 x 24 cm and 26 x 32 cm) and is equipped with buffer recirculationPower supply PowerPro can operate agarose gels at up to 500 V and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Screen TRIO, power supply PowerPro 500, UV fluorescent ruler, UV gel scoop (26 cm), agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (50 x 1 l)
Automatic Plate Heat Sealer ALPS 5000
With the Thermo Scientific™ Plate Heat Sealer, microtitre plates can be heat-sealed quickly and easily. Sealing time, temperature, pressure, foil length and sealing distance are adjustable.Seals plates from 7 to 46 mm highReduced risk of contamination than in pneumatically driven sealersTouch screen controlSavable protocolsRS232 interfaceSealing temperature range:Ambient ... 199 °CSealing speed:30 sec. per plateOperating humidity range:10 ... 80 %, non-condensingOperating temperature range:15 ... 40 °CDimensions (W x D x H):232 x 506 x 518 mmWeight:25 kgPower supply:110 ... 240 V, 50/60 Hz
Blue light LED transilluminator safeVIEW Mini-2
The compact LED transilluminator offers a safe way to view and document fluorescently stained nucleic acid gels. The blue 470 nm LED light source has the advantage of causing no damage to DNA and RNA.Aluminium alloy casingAutomatic shutdown after approx. 6 minutesIncluding filter screen with orange filter (580 nm)Compatible with electrophoresis chambers of the size of multiSUB Mini and Midi gel tanksScope of supply: Transilluminator, filter, hoodWavelength:470 nmViewing size:153 x 153 mmDimensions (W x D x H):200 x 200 x 13.9 mmWeight:760 gPower supply:DC 12 V, 2 A
Blue light LED transilluminators runVIEW MINI
The Mini-Blue light Transilluminator uses harmless blue light to illuminate both traditional Ethidium bromide stained gels as well as safe stains. Slotting under any gel tank, but perfect for our MINI and MIDI sized multiSUB gel tanks. With an orange filter window to visualize DNA in real time within gel tanks, it is perfect for quickly checking PCR fidelity and restriction digest results. The device can also be used as a stand-alone transilluminator with the gel placed directly on the illuminator.High intensity blue LED illuminator allows visualization of a wide range of fluorescent gel stainsCompatible with runSAFE, commercial safe stains and ethidium bromideScope of supply: Transilluminator, filter (orange)SpecificationsWavelength:470 nmViewing size:112 x 75 mmDimensions (W x D x H):86 x 170 x 25 mmWeight:338 gPower supply:DC 12 V, 2 A
Blue- and white light LED-Transilluminators
Powerful LED lighting arrays for blue (470 nm) and white (broad wavelength) illumination to image fluorescent and colorimetric gels. Through LED lights no ageing of UV bulbs and because of the inbuilt white LED array a separate white light table is not necessary. Well suited for teaching labs in universities and schools. Compatible with blue light excited safe DNA stains, as well as traditional stains such as ethidium bromide.Magnetic filter compatible with wide range of DNA stains3 level adjustable LED intensityBottom up illumination provides even sample illuminationAutomatic power-off to prevent heat build-upHigh quality aluminium housingScope of supply:Transilluminator, orange hinged filter, paper hoodSpecificationsWavelength:470 nm + white lightViewing size:120 x 180 mmDimensions (W x D x H):220 x 185 x 30 mmInput voltage:12 V, 2 APower supply:110 ... 240 V
Cap strips, PP
For sealing 8 well PCR tube strips or 96-well PCR plates. Large end tab facilitates the removal of the cap strip.LabeledHighly transparent flat caps are suitable for qPCRFree of DNase, RNase, human DNA, endotoxin and pyrogen
Clear Seal
For PP, PS and COC microplates. Transparent, Peelable.Application:Quantitative PCR, fluorescence / colorimetric optical assays.Sealing:2 to 3 sec 170 to 175°CSeal Integrity:-80°C to +110°C, PCR with pressure lids
Clear Seal 3730
Thin clear Polyester backed film forming a piercable seal to PP, PS and COC plates.Application:ABi 3730 capillary sequencing. Quantitative PCR. Not peelable.Sealing:1 sec 170 to 175°CSeal Integrity:-80°C to +80°C, 110°C with PCR lid pressure
Clear Seal MkII
Clear Polyester backed film, with non peelable seal on Polypropylene microplates.Application:Quantitative PCR, optical assays, Roche Lightcycler480, waterbath cycling.Sealing:2 to 3 sec 170 to 175°C.Seal Integrity:-80°C to 110°C