Incubators INplus
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorNatural convectionSterilization programme (4 h/160 °C) for sterilization of working chamberTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Infra-red hotplate HP-200-IR-L
Using an ultra-efficient, infra-red heater of just 900 W power this hotplate will boil 1 litre of water over 30 % faster than a conventional ceramic hotplate of 1200 W. Ideal for heating and stirring large volumes of liquid.Chemically resistant glass ceramic top plateFlashing "Hot" warning light for temperature above 50 °C, mains independentWith BioCote®, silver-based, antimicrobial protection.
Insert cap disks for LLG cryotubes, PP
Cap-disk with star-shaped insert. For colour-coding of cryotubes and quick identification of the samples.
Insert grid for underbench freezers TUS and freezers TS
Additional insert grid incl. 4 fastening clips.
Insulated containers Magic Touch 2™, with lid
Excellent insulating properties combined with high chemical resistance, the ice containers can be used with wet ice as well as with dry ice, ice-salt mixtures, dry ice methanol mixtures or liquid nitrogen.DurableImpervious to moisture and odorsWith pour spout, drip-proof rims and fill line indicatorLightly textured non-slip finishTemperature range: -196 °C to 100 °CExcellent insulating properties combined with high chemical resistance, the ice containers can be used with wet ice as well as with dry ice, ice-salt mixtures, dry ice methanol mixtures or liquid nitrogen.DurableImpervious to moisture and odorsWith pour spout, drip-proof rims and fill line indicatorLightly textured non-slip finishTemperature range: -196 °C to 100 °C
Insulating mantles KM-IRB series
Insulating mantles for single and double neck round bottom flasks, heated insulating mantles with glass yarn element (max. 450 °C) and grounding.Made by hand workAluminium coated outer jacketThermally insulatedTo prevent heat losses occuring at the upper flask halves
Insulating mantles KM-IRU series
Insulating mantles for single and double neck round bottom flasks. To prevent heat losses occuring at the upper flask halves.Made by hand workAluminium coated outer jacketThermally insulated
Interior lighting for constant climate chambers KBF PRO
Interior lighting with climate-resistant LEDs, switches when the unit door is opened.
Isolating box with lid
The insulation boxes are suitable for the transport and storage of temperature-sensitive products.To maintain cold chainsStackableNeopor® is characterised by its high hot and cold thermal insulation properties, compressive strength, shock absorbing properties, low weight and insensitivity to moisture. In addition, it has infrared absorbers and reflectors that reduce thermal conductivity and give the box its silver-grey colour.
IsoTherm-System®, starter set
Modular system for transporting, storing, and gently thawing deep-frozen samples.Holds 24 tubes (1.5 ml, 2 ml)IsoPack (cold pack) white holds 0 °C for up to 6 h and blue holds -21°C for up to 3 h, pre-cooling in the freezerNo more melting ice baths (contamination risk)All system components can be used separatelyRacks can be stacked, are autoclavable, float in water and can be centrifuged in a microtitration plate rotorScope of supply: 1 x IsoSafe (insulating box), 1 x IsoRack (work rack), 1 x IsoPack (cold pack) 0 °C, 1 x IsoPack (cold pack) -21 °C
Kettle 4110
The concealed safety lid opens simply by pressing a button.1.7 l plastic water container360° baseLarge water level indicator on the outsideLimescale filterControl lampAutomatic switch-offOverheating and dry-running protectionConcealed heating elementNominal power:1850 ... 2200 WDimensions (W x D x H):220 x 145 x 245 mm
KGW Vacuum-insulated stainless steel container Type APOLLO
Liquid nitrogen container made of stainless steel for storage and transport of liquid nitrogen.High mechanical stability, the container is made of stainless steel. Low evaporation rate by multi-layer superinsolation in the vacuum space. Very durable by robust constructive design, production and choice of material. Long holding time by the use of adsorption and getter materials.Standard equipment:Integrated safety devices at the container neck Vacuum lock with safety valveEasy running castorsMini-flange-joint NW 50 KFTransfer siphon with transfer hose covered with metallic tissueHand and protection ring Contents gaugePressure attachment by fluid removal without external power supply
KS 3000 i control / KS 3000 ic control
Innovatively designed, compact incubator shaker to safely allow unattended operation in a temperature-controlled environment. The unit has a large LED display for speed, temperature and timer. An integrated PID temperature control allows the use of PT 1000 temperature sensors to assure highly accurate temperature control. The electronically controlled incubator comes equipped with RS 232 and USB ports for PC interface. All functions can be controlled and documented using labworldsoft® (software sold separately).Controls with antimicrobial coating for reduction of bacteriaJunction box in the workspace for connection of an additional temperature sensor, e.g. PT 1000 (included with delivery)Wide range of attachments allows for using almost all shapes and sizes of vesselsUnit stops automatically when hood is liftedCollecting tray with drain hose on rear of the unitElectronic timerError code displayKS 3000 ic control additionally with built-in cooler for connection to an external cooling unit.
Label Dispenser for Deep freeze labels
Perfect organizer for fast and efficient use of labels. Manufactured from clear acrylic and holds 6 label box. Drop the label box in the label dispenser and feed the paper through the slot. The writing surface enables easy and clean writing on the label. The sharp cutting edge helps to tear off the labels. A weighted base with nonskid pads prevents sliding or lifting. The article is delivered without pen.
Laboratory chiller LABOCOOL LC 200
The laboratory chiller LABOCOOL LC 200 is used to remove process heat and was specially developed for cooling samples in open vessels during sonication with a SONOPULS ultrasonic homogeniser. The LC 200 is characterised by a closed water circuit without an equalisation tank. This allows a constant water level in the sonication vessel and prevents overflow.Digital display shows water temperature and status of the cooling functionPowerful peristaltic pump with adjustable volume flowPractical recessed grips in the housingEnvironmentally friendly thanks to natural refrigerant R-290Protection class IIncl. connection material and hose (4 m)
Laboratory chiller LABOCOOL LC 400
The laboratory chiller LABOCOOL LC 400 is used to remove process heat and was specially developed for cooling samples during sonication in an ultrasonic bath. The LC 400 is characterised by a closed water circuit without an equalisation tank. This prevents the ultrasonic bath from overflowing.Digital display shows water temperature and status of the cooling functionPowerful centrifugal pumpPractical recessed grips in the housingEnvironmentally friendly thanks to natural refrigerant R-290Suitable for all SONOREX ultrasonic baths with bottom drainProtection class IIncl. connecting hub, three-way ball valve and hose (3 m)
Laboratory freezer SFFfg Performance, with explosion-proofed interior
Freezer with manual defrost and static cooling system for stable long-term storage of sensitive samples. The interiors of the devices meet the safety requirements of the EU Directive 2014/34/EU ("ATEX Directive") and have been tested according to the standards EN1127-1 and IEC 60079-0 or IEC 60079-15 by the ATEX conformity assessment body electro-suisse (SEV).Digital temperature displayOptical and acoustic alarmPotential-free alarm contactPower failure alarm when mains power returnsMin./max. temperature recordingCalibration functionMaximum temperature stability and consistency according to EN 60068-3Adjustable shelves made of glassSelf-closing door with integrated lockDoor hinge right, exchangeableEnvironmentally friendly, natural refrigerant R290
Laboratory freezer SFFsg Performance
Freezers with static cooling system and manual defrost for stable long-term storage of sensitive samples and substances. If the power supply was interrupted, the power failure info reports that the unit was without power and the maximum temperature when the power returns.Monochrome display with touch buttonsMin./max. temperature recordingOptical and acoustic alarmPotential-free alarm contactCalibration functionFeed-through for external sensors (Ø 10 mm)Environmentally friendly, natural refrigerant R290Maintenance timer individually adjustableAntimicrobial handle with opening mechanismAutomatic door closing at an opening angle of less than 90°Door with mechanical lockDoor hinge right, exchangeable
Laboratory freezer SFFvh Perfection
Freezers with dynamic cooling system and auto defrost for stable long-term storage of sensitive samples and substances. The integrated data logger records temperature profile, alarm history, and service information and can be read out via the USB interface.2.4" colour display with touch & swipe operationPower failure alarm: integrated battery takes over the power supply and triggers an acoustic and visual alarmWiFi/LAN interface for networking with SmartMonitoringIntegrated SmartModule (removable)Min./max. temperature recordingPotential-free alarm contactCalibration functionLED front lightingFeed-through for external sensors (Ø 10 mm)Environmentally friendly, natural refrigerantMaintenance timer individually adjustableAntimicrobial handle with opening mechanismAutomatic door closing at an opening angle of less than 90°Door with mechanical lockDoor hinge right, exchangeableDIN 13277 compliant
Laboratory freezer SFTfg Performance, with explosion-proofed interior
Freezer with manual defrost and static cooling system for the stable storage of flammable substances in closed containers that could form explosive atmospheres. The interior of the device fulfils the safety requirements of the EU Directive 2014/34/EU ("ATEX Directive") and has been tested in accordance with the IEC 60079-0 and IEC 60079-7 standards.Digital temperature displayOptical and acoustic alarmPotential-free alarm contactPower failure alarm on mains returnMin./max. temperature recordingReminder function reminds of next cleaning or calibrationFeed-through for external sensorsShelves made of glassSelf-closing door with mechanical lockAntimicrobial handle with opening mechanismDoor hinge right, exchangeableEnvironmentally friendly, natural refrigerant R600aTested for use in clean rooms acc. to DIN EN ISO 14644
Laboratory freezers LF
White steel exterior, stainless steel interiorAutomatic door closingAdjustable shelves, castors, key lock on doorAir forced coolingMicro processor controller with digital displayApprox. 72 hours battery back up for alarms, loggings and temperature display in case of power cutPrepared for GSM alarmPrepared for connection of 2 additional probesAuto cycle in case of probe failureAmbient temperature displayDirect download of logged data on USB memory stick, direct upload of new software via USB memory stick3-level password protectedBattery level indicationDisplay text available in different languagesTemperature graph, integrated data loggerRS485/RS232 interfaceIntegrated memory for 30 yearsVisual and acoustic alarmAdjustable high/low temperature alarmAlarms: Power failure, probe failure, instrument failure, open doorContact for remote alarm, shows all alarms5 year warranty on the compressorWhite steel exterior, stainless steel interiorAutomatic door closingAdjustable shelves, castors, key lock on doorAir forced coolingMicro processor controller with digital displayApprox. 72 hours battery back up for alarms, loggings and temperature display in case of power cutPrepared for GSM alarmPrepared for connection of 2 additional probesAuto cycle in case of probe failureAmbient temperature displayDirect download of logged data on USB memory stick, direct upload of new software via USB memory stick3-level password protectedBattery level indicationDisplay text available in different languagesTemperature graph, integrated data loggerRS485/RS232 interfaceIntegrated memory for 30 yearsVisual and acoustic alarmAdjustable high/low temperature alarmAlarms: Power failure, probe failure, instrument failure, open doorContact for remote alarm, shows all alarms5 year warranty on the compressor
Laboratory freezers LF, with explosion-proofed interior
Laboratory freezers for the storage of explosive and highly flammable substances. With explosion-proof interior and approved to EN 60079-15 category 3, zone 2, CE EX 11-/3 G.White steel exterior, stainless steel interiorAutomatic door closingAir forced cooling, adjustable shelves, castors, key lock on doorMicro processor controller with digital displayApprox. 72 hours battery back up for alarms, loggings and temperature display in case of power cutPrepared for GSM alarmPrepared for connection of 2 additional probesAuto cycle in case of probe failureAmbient temperature displayDirect download of logged data on USB memory stick, direct upload of new software via USB memory stick3-level password protectedBattery level indicationDisplay text available in different languagesTemperature graph, integrated data loggerRS485/RS232 interfaceIntegrated memory for 30 yearsVisual and acoustic alarmAdjustable high/low temperature alarmAlarms: Power failure, probe failure, instrument failure, open doorContact for remote alarm, shows all alarms5 year warranty on the compressor