Erlenmeyer flasks, DURAN® Super Duty, narrow neck
With approximate graduations. Reinforced sturdy rim, and increased mechanical strength for heavy duty. Glass type I / neutral glass as per USP, EP and JP. With Retrace Code (Batch Identification) certificate available via the Internet. Autoclavable.
Euronormboxes, PP, stackable
Solid transparent plastic containers, odorless, cold- and heat-resistant, stable against the most acids and alkalis. Dishwasher safe, food safe. Corresponding lids please order separatelySuitable Trolley (Cat. No.: 9.301 502)
Exchangeable blocks Eppendorf SmartBlocks™
Flexibility has never been this easy. Eppendorf offers a variety of SmartBlocks™ for tubes from 0.5 ml to 50 ml.Fast and simple block exchange due to Eppendorf Quick ReleaseOptimized block design guarantees maximum temperature transfer to the sample
Exchangeable blocks for Thermomixers and BlockThermostats
The right physical weight and fitting is important for high temperature accuracy inside the sample. All blocks are made out of temperature conductible aluminium. Customized blocks on request. All blocks are autoclavable.
Exhaust Systems for Muffle Furnaces
Chimney for connection to an exhaust pipe, catalytic to clean the exhaust air. Compatibility between the furnace and the exhaust system must be checked individually.
External Pt100 Sensors
For external thermoregulation applications, standard cable length 1.5 m
External water supply
Free-standing. Set consisting of fresh water canister (20 l) with pump, level sensor, and waste water canister (20 l).
Extraction heating mantles HM-200-MP
The multi position (extraction) mantles have a built-in electronic controller. The vented case's unique air flow ensures that the outer case does not heat up, preventing burns when touching it.Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching3 support rods with 12.7 mm diameter are includedTop cover is made of polypropylene and external surfaces are powder coated, for good general chemical resistanceCoiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transferEarth (ground) screen encloses the heater for added safetyIndividual heater cartridges are replaceableNeon lights indicate when power is onThe multi position (extraction) mantles have a built-in electronic controller. The vented case's unique air flow ensures that the outer case does not heat up, preventing burns when touching it.Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching3 support rods with 12.7 mm diameter are includedTop cover is made of polypropylene and external surfaces are powder coated, for good general chemical resistanceCoiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transferEarth (ground) screen encloses the heater for added safetyIndividual heater cartridges are replaceableNeon lights indicate when power is on
Extraction heating mantles with stirring function SHM-200-MP
The multi position (extraction) mantles have a built-in electronic controller. The vented case's unique air flow ensures that the outer case does not heat up, preventing burns when touching it.Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching3 support rods with 12.7 mm diameter are includedTop cover is made of polypropylene and external surfaces are powder coated, for good general chemical resistanceCoiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transferEarth (ground) screen encloses the heater for added safetyIndividual heater cartridges are replaceableNeon lights indicate when power is onAllow the solution to be stirred and heated simultaneouslyProvide stirring speeds of between 50 to 1000 rpmOne stirring control operates each set of three recesses
Fixing clip attachment AS 4000.2 for Incubator Shaker KS 4000 i control/KS 4000 ic control
For shaking flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips).Number of fixing clips (volume): 50 x AS 2.1 (25 ml), 48 x AS 2.2 (50 ml), 25 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 7 x AS 2.6 (1000 ml)
Flake ice maker AF series, with reservoir
Manufactured acc. to DIN ISO 9001. For producing solid, saturated ice flakes from hygienically perfect, 0.5 °C cold ice. Equipped with the sanitation system XSafe to increase safety and prolong service life. The included UV lamp reduces the infestation of bacteria and viruses in the machine and in the water circuit.Housing made of stainless steelSpecial material in the interior with antimicrobial propertiesAir-cooled condenser systemEletronic control of the ice temperatureFilter cleaning notificationErgonomic access to ice through sliding door facilitates workBuilt-in reservoir, allows under-counter installation
Flake ice maker EF series, with reservoir and waste water pump
Manufactured acc. to DIN ISO 9001. For producing solid, saturated ice flakes from hygienically perfect, 0.5 °C cold ice. Equipped with the sanitation system XSafe to increase safety and prolong service life. The included UV lamp reduces the infestation of bacteria and viruses in the machine and in the water circuit.Housing made of stainless steelSpecial material in the interior with antimicrobial propertiesAir-cooled condenser systemEletronic control of the ice temperaturePWD water drainage system: pumps out residual and waste water over a distance of 15 m. Installation possible with drain not flush with floor (up to max. 1.70 m higher than machine)Filter cleaning notificationErgonomic access to ice through sliding door facilitates workBuilt-in reservoir, allows under-counter installation
Flake ice maker MF series, without reservoir
Manufactured acc. to DIN ISO 9001. For producing solid, saturated ice flakes from hygienically perfect, 0.5 °C cold ice. Equipped with the sanitation system XSafe to increase safety and prolong service life. The included UV lamp reduces the infestation of bacteria and viruses in the machine and in the water circuit.Housing made of stainless steelSpecial material in the interior with antimicrobial propertiesAir-cooled condenser systemEletronic control of the ice temperatureExternal indicator lights for monitoring operation„Plug-and-Play“ technology produces ice steadily thanks to system without cycleEcoX models use only natural refrigerants R290 or R744Devices are supplied without reservoir. Please order separately.
Flake ice maker with reservoir, UFP series, air cooled
For fast, HACCP-compliant production of various quantities of compact, granular ice flakes for laboratories, the chemical industry and food production. The ice is produced by a vertical stainless steel evaporator and transported by a worm gear to the head of the cylinder, pressed and broken into the desired size. For the production of up to 153 kg of ice per day. The new refrigerant R290 meets the requirements of the latest EU regulations, reduces energy consumption by up to 30%, has no ozone depletion potential and only a very low global warming potential. Robust stainless steel evaporatorEasy ice removalSuitable for demineralised waterClosed system for optimum hygieneEnvironmentally friendly refrigerantAir-cooledDepending on model, has storage capacities from 20 to 55 kgStainless steel housingEasy to cleanHeight-adjustable feet from 110 to 150 mmComfortable and safe operationLow energy consumptionScope of supply: Flake ice maker with height-adjustable stainless steel feet, ice shovel, water inlet and outlet set
Flake ice maker without reservoir, RFP series, air cooled
For fast, HACCP-compliant production of various quantities of compact, granular ice flakes for laboratories, the chemical industry and food production. The ice is produced by a vertical stainless steel evaporator and transported by a worm gear to the head of the cylinder, pressed and broken into the desired size. For the production of up to 400 kg of ice per day. The new refrigerant R290 meets the requirements of the latest EU regulations, reduces energy consumption by up to 30%, has no ozone depletion potential and only a very low global warming potential. Robust stainless steel evaporatorSuitable for demineralised waterEnvironmentally friendly refrigerantAir-cooledStainless steel housingEasy to cleanComfortable and safe operationLow energy consumptionScope of supply: Flake ice maker, water inlet and outlet set
Flat cover for Water baths WTB
Flat stainless steel cover with openings and concentric ring sets
Flat stainless steel cover for water baths
Flat stainless steel cover with openings and concentric ring sets
Floating Centrifuge Tube Racks, PP
Open style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Tubes are held tightly in rack and can be removed easily.End handles allow easy transportStackableSteam autoclavable at 121 °C
Floating cryovial racks Nalgene™, Type 5974, PP
For 1.0 to 2.0 ml test tubes and cryovials. Racks will float with a full load of filled tubes. With moulded identification numbers and letters.
Floating pellets, PP
Diameter 20 mm. Can cover 0.166 m2. Only suitable for use with water. Temperature stable up to 100 °C.