Hotplates C-MAG HP 7/C-MAG HP 10
Made of glass ceramic which offers excellent chemical resistance.Fixed safety circuit of 550 °CHot Top indicator: Hot surface warning to prevent burnsExact temperature setting via digital display (LED)Digital error code displayRaised control panel for protection against spilt liquidsAdapter according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control
Hotplates HP-200D-C
With glass ceramic top plate. The surface is easy to clean and allows high plate temperatures for faster heating.Flashing "Hot" warning light for temperature above 50 °C, mains independentDigital microprocessor control for accurate temperature controlIndependent safety circuit protects against overheatingWith BioCote®, silver-based, antimicrobial protection.
Hotplates HP-300-BS/WS//HP-300-BC/WC, digital
Hotplates with accurate temperature control.Spill-resistant front control panel with chemically toughened glass for extra resilienceHot surface warning light flashes when plate temperature is above 50 °CDurable chip-resistant aluminum top plate offers excellent heat transmission, rapid heating, and oven temperature distributionCeramic top plate is chemical resistant and easy to clean, plus the white surface ensures good visibility of colour changesWith an integral fixing point for a retort rodWith BioCote, silver-based, antimicrobial protection
Hotplates HP-400
Hotplates with accurate temperature control. Durable chip-resistant aluminum top plate offers excellent heat transmission for rapid heating and even temperature distributionSpill-resistant front control panel with chemically toughened glass for extra resilienceThe set and actual temperature is shown on the displayMains-independent warning light for surface temperatures above 50 °CIntegrated fitting for a retort rodCoated with BioCote® antimicrobial protectionScope of supply: Hotplate, PTFE-coated temperature sensor
Hotplates SuperNuova™+
Hotplates SuperNuova™+ are characterised by reliable performance, safety, and simple operation.Temperature setting can be savedHot Top warning light is activated when the hot plate surface is above 50 °CEasy-to-read LED displayRaised display design protects electronics from spills
Hotplates with power control and mains cable
For continuous operation. Electric hotplates with stepless perfomance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet. Mains cable approximately 1.7 m.
Hotplates with power control and permanent connection
For continuous operation. Electric hotplates with stepless perfomance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet.
Hotplates with power control, thermostatic controller and mains cable
For continuous operation. Electric hotplates with thermostatic temperature control and stepless performance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet. Mains cable approximately 1.7 m.
Hotplates with power control, thermostatic controller and permanent connection
For continuous operation. Electric hotplates with thermostatic temperature control and stepless performance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet.
Hotplates, analogue, HP-200-C
With glass ceramic top plate. The surface is easy to clean and allows high plate temperatures for faster heating.Flashing "Hot" warning light for temperature above 50 °C, mains independentAccurate temperature control with LED setting scaleCompact, space saving designIntegral fitting for a retort rodCan be used with TC-200D digital temperature controllerWith BioCote®, silver-based, antimicrobial protection.
Hotplates, analogue, HP-200-S
Plate made of robust aluminium-silicon alloy with a thin ceramic coating for added chemical resistance.Flashing "Hot" warning light for temperature above 50 °C, mains independentAccurate temperature control with LED setting scaleCompact, space saving designIntegral fitting for a retort rodCan be used with TC-200D digital temperature controllerWith BioCote®, silver-based, antimicrobial protection.
Hotplates, digital HP-200D-S
Maximum temperature 300 °C. Digital setting and control of plate temperature with 1 °C resolution and cast aluminium/silicon alloy top plate. The 300 x 300 mm top plate model has a retort rod mounting at the rear of the housing. With BioCote, silver-based, antimicrobial protection.
Infra-red hotplate HP-200-IR-L
Using an ultra-efficient, infra-red heater of just 900 W power this hotplate will boil 1 litre of water over 30 % faster than a conventional ceramic hotplate of 1200 W. Ideal for heating and stirring large volumes of liquid.Chemically resistant glass ceramic top plateFlashing "Hot" warning light for temperature above 50 °C, mains independentWith BioCote®, silver-based, antimicrobial protection.
Multiple hotplate systems behrotest®
Multiple hotplate systems, 360 W, with individually adjustable heating controls and indidicator lights. Maximum surface temperature 400 °C.
Power controller, MES 2000 PSI
An alternating current safety controller for variable and no-loss control of hotplates, heating tapes, soldering irons, light bulbs, infrared radiators etc.Potentiometer scale adjustment and electronic triac switch monitoring. Controller switches irreversibly to dipole in the event of triac switch malfunction and visual and audible alarms operate immediately. This ensures optimum safety.Voltage220-235V 50 / 60 HzSwitching capacityMax. 2300 VASwitching currentMax. 10 AElectronicsPhase controlsRegulating range10 to 235 V a.c.Anti-interferenceGrade NDimensions:188 x 110 x 70 mmWeight1.2 kg
Precision hotplate PZ 44
Automatic, precise regulation of temperatures between 20 and 450 °C. Digital presetting and temperature display. Three power levels (825 W, 1650 W and 3300 W) can be set and an additional electronic power controller (adjustable 10 % to 100 %) is provided. At 825 W and 3300 W settings the entire plate surface is heated. At 1650 W setting only the right hand side of the plate is heated. As a result of heat conduction, the temperature from the right hand side to the left edge of the plate varies by approx. 40 %. Built-in relay allows direct connection of electronic contact thermometers. With solid, flat, low-distortion, cast GG15 alloy. Switching differential ±1 K.
Precision hotplates PZ
For continuous operation. Provide extremely accurate, uniform temperatures, even in plate corners and on edges. Polished anodised aluminium heating surface. Microprocessor-controlled temperature controller with temperature setting up to 99.9 in 0.1 °C steps, over 99.9 in 1 °C steps. Actual temperature displayed continuously. With separate power controller for performance adjustment to the heating requirements from 10 to 100 %. Built-in relay allows direct connection of electronic contact thermometers.
Serial heating units series KM-R3
LabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with three heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).Size and rating specifications are valid for each heating position.
Serial heating units series KM-R6
LabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with six heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).Size and rating specifications are valid for each heating position.
Triac mains voltage regulator, MES 1000 / MES 2000
Electronic alternating current adjuster for easy control of resistance power equipment such as hotplates, soldering irons, light bulbs, infrared radiators, universal motor speed regulators, stirrers etc. With high rating fuse, 2 pin on/off luminous rocker switch and shielded, fused Schuko socket.Adjustment 10 to 230 V, fitted with an interference suppressor in accordance with EN standard.