Liquid nitrogen container, aluminium
For storage and transport of liquid nitrogen.Super-insolation foil in the vacuum spaceLow evaporation rateVacuum valveSmall-flange KF NW 50Loosely resting plug
Liquid nitrogen pressure vessels AC
For the storage and transport of liquid nitrogen. The vessels are suitable for a wide range of laboratory applications. Inner and outer vessel are made of stainless steel with multi-layer super insulation and protected by a high-integrity vacuum.Quick and easy liquid removalLong nitrogen holding timesComplies with the European Transportable Pressure Equipment Directive (TPED) 2010/35/EUFor the storage and transport of liquid nitrogen. The vessels are suitable for a wide range of laboratory applications. Inner and outer vessel are made of stainless steel with multi-layer super insulation and protected by a high-integrity vacuum.Quick and easy liquid removalLong nitrogen holding timesComplies with the European Transportable Pressure Equipment Directive (TPED) 2010/35/EU
Liquid nitrogen pressure vessels AC, with auto pressure building
For the storage and transport of liquid nitrogen. The vessels are suitable for a wide range of laboratory applications. Inner and outer vessel are made of stainless steel with multi-layer super insulation and protected by a high-integrity vacuum.Quick and easy liquid removalLong nitrogen holding timesComplies with the European Transportable Pressure Equipment Directive (TPED) 2010/35/EUWith auto pressure building
Liquid nitrogen storage vessel AC LIN
For storage and transport of liquid nitrogen. The vessels are suitable for a wide range of laboratory applications.Multilayer vacuum super insulationLong nitrogen holding timesLightweight, compact aluminium vesselComplies with the European Directive for transportable pressure equipment (TPED) 2010/35/EU
Liquid nitrogen transport vessel AC LIN T
For storage and transport of liquid nitrogen. The vessels are suitable for a wide range of laboratory applications.Multilayer vacuum super insulationLong nitrogen holding timesLightweight, specially reinforced aluminium vesselsComplies with the European Directive for transportable pressure equipment (TPED) 2010/35/EUADR approval
LLG Partition inserts for Cryoboxes, 133 x 133
For cryoboxes 133 x 133mm. With compartment heights and formats as indicated. Other sizes available on request.
LLG-Cryogenic storage boxes, plastic coated, 133 x 133, without divider
Dimensions: 133 x 133 mm square. For the storage of samples. Made of cardboard, plastic coated. Without divider. With lid. Further sizes and colours available on request.
LLG-Cryogenic storage boxes, plastic coated, 136 x 136, without divider
Freezer and cryogenic storage boxes (CryoBoxes). Dimensions: 136 x 136 mm square. For the storage of samples. Made of cardboard, plastic coated, without divider. With lid. Further colours available on request.
LLG-Cryogenic storage boxes, plastic coated, white, without divider
Made of cardboard, plastic coated. Without divider. Square. For the storage of samples. With lid. Further sizes and colours available on request.
LLG-Cryotubes, PP, sterile
With star-shape in the screw cap, for automated capper/decapper.Temperature resistant down to -196 °C. Not appropriate for operations in liquid nitrogen. With marking area, fill line and graduations printed on the vial. Safe and precise handling of biotechnology materials. Bar-code printed on each tube. DNase/RNase free. Vials and caps are autoclavable at 121 °C.Homogeneous conception:All made from polypropyleneSingle-body, single-turn screw capPrinted graduations for accurate measurements. Large white area for writing specimen identification. Sterile.Packed in 2 bags of 50 tubes.For research and development only.
LLG-Freezing container
The LLG-Freezing container is a simple system for rapid cryo preservation of cells in a freezer. Up to 18 cryovials with a volume of 1 or 1.8 ml can be placed in the freezing container.Made of PC with HDPE closureCooling rate of -1 °C/min100 % isopropyl alcohol is required for use.
LLG-Laboratory Power Failure Detector
Immediate visual and acoustic alarmAlarm can sound for short power outages, or for larger periods of at least 12 hours (can be switched off manually).Plug safety cover offers protection against accidental disconnection of plugMaximum total power of connected devices. 3500W power supply 230V 50HzSuitable for European plugsMax. Rating 16 AWith built-in batteryScope of supply:1 x power failure detector2 x plug safety caps2 x screws
LLG-Partition inserts for Cryoboxes, 136 x 136
For cryoboxes 136 x 136mm. With compartment heights and formats as indicated. Other sizes available on request.
LLG-Partition inserts for LLG-Cryoboxes, white
With compartment heights and formats as indicated. Other sizes available on request.
LLG-Temperature block exact, aluminium
Suitable for both cooling and heating, universally usable, uniform temperature distribution within the block, ideal for all temperature-sensitive applications.Aluminum blocks with conical compartments and closed bottom for easy and precise tempering of reaction tubes and PCR tubes. The precisely adapted shape of the borings and the closed bottom offer advantages compared with cylindrical drilled blocks with open bottom, such as much better heat transfer and temperature accuracy. Made of a special aluminum alloy with high thermal conductivity. Identical temperature conditions for all samples. Compact size, requiring little space. Suitable for 96-well plates, 8 or 12 strips and single tubes. Ideal for working with 8- or 12-channel pipettes. Blocks for different tube sizes and combinations of tube sizes as indicated, all working steps in one block, holes closed at the bottom and tapered to fit perfectly the respective tube sizes and offer an optimum heat exchange.
Locator Rack & Box Systems
Available with or without ultrasonic level monitor, Thermo Scientific Locator indexed rack and box systems allow quick, efficient sample retrieval and offer cost effective maximum storage capacity (up to 6,000 samples) combined with minimum liquid nitrogen consumption.Outstanding temperature uniformity: samples are stored below -180 °C, even when less than 5cm of liquid nitrogen remains in the vesselOptional Ultrasonic Level Monitor safeguards irreplaceable samples with minimal liquid nitrogen evaporation and conductionOptional monitor provides continuous LED readout of liquid nitrogen level in 1/8 incrementsAudible alarm sounds when nitrogen level falls below safe range; dry remote alarm contact for remote monitoringAdvanced vacuum insulation minimizes liquid nitrogen evaporation and reduces operating costsSecure locking hasp prevents unauthorized entry
Microcentrifuge Tube Storage Boxes Nalgene™, Type 5055, PC
Safely store samples using Microcentrifuge Tube Storage Boxes. High-temperature polyurethane foam insert securely holds 64 or 81 microcentrifuge tubes sized 0.2, 0.5 or 1.5 ml.bottom constructed in white and lid in transparent polycarbonatetemperature resistant from -135 to 121 °Cwith grid numbers for reliable identification of individual samples
Microtube Storage Boxes, PC
Manufactured from polycarbonate with high mechanical strength and high temperature resistance between -196 to +121°C. Uniquely designed to carry 81 cryo tubes in 9 x 9 array "Hedgehog" designed tube compartments holds the tube in their position firmly. Unique design with vent and drainage holes guarantees best, efficient air circulation. Forward slope base ensures quick visual orientation. Easily stackable for reducing storage space. Hinged lid with built-in stop allows easy one-handed access to tubes. Clear box lid enables easy identification of box content and protects the tubes from dust, moisture and other environmental effects. Alphanumerical index both on tube rows and the lid enables easy identification of tube positions. Box is supplied together with a disposable forceps, made from ABS, with fine end for easy handling and fast removal of tubes.
Microtube Storage Boxes, PP, 50-/100-Well
Autoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage.Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.
Microtube storage boxes, PP, 50-/100-Well, set
Autoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage. Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.The set contains the colours blue, green, violet, yellow and orange.
Mini coolers, PC
Mini coolers are designed to protect a wide range of solutions (enzymes, DNA, RNA, cell suspensions) by helping to maintain freezer temperatures on the lab bench. Durable polycarbonate filled with non-toxic gel. Mini coolers hold twelve 0.5 ml to 2.0 ml tubes.
Mini-Freezer KBT 08-51, with ST100 control
The mini-freezers are the ideal solution for chilling material samples directly at the workplace.Refrigeration unit: low noise, air-cooled, low maintenancewith natural refrigerant R-1270Housing parts made of high quality stainless steelInsulated stainless steel hinges and hinged lid with magnetic sealRam protection ring going over and underMicroprocessor-controlled, with membrane keyboard and easy-to-read LED displayProtection against unintentional activationAlarm system that is separate from the mains, with battery capacity for approx. 72 hoursDisplay of the maximum temperature reached in the interior area during the faultRS485 interface, potential-free contact for connection to an external alarm system and 100 mV/K outputOptical and acoustic alarm
Mini-Freezer KBT 08-51, with ST71 control
The mini-freezers are the ideal solution for chilling material samples directly at the workplace.Refrigeration unit: low noise, air-cooled, low maintenancewith natural refrigerant R-1270Housing parts made of high quality stainless steelInsulated stainless steel hinges and hinged lid with magnetic sealRam protection ring going over and underElectronic temperature control with LED displayOptical and acoustic alarm
Mini-Freezer KBT 18-41, with ST100 control and circulation air fan
The mini-freezers are the ideal solution for chilling material samples directly at the workplace.Refrigeration unit: low noise, air-cooled, low maintenancewith natural refrigerant R-1270Housing parts made of high quality stainless steelInsulated stainless steel hinges and hinged lid with magnetic sealRam protection ring going over and underMicroprocessor-controlled, with membrane keyboard and easy-to-read LED displayProtection against unintentional activationAlarm system that is separate from the mains, with battery capacity for approx. 72 hoursDisplay of the maximum temperature reached in the interior area during the faultRS485 interface, potential-free contact for connection to an external alarm system and 100 mV/K outputOptical and acoustic alarm