Sloping shoulder reagent bottles, wide-mouth, PP, with octagonal-knob cap
Transparent. Good chemical resistance, ideal for long-term storage of liquids.NS stopper made of PPWith octagonal-knob cap and red coreAutoclavable at 121 °C (2 bar) according to DIN EN 285
Sloping shoulder reagent bottles, wide-mouth, PP, with square-knob cap
Transparent. Good chemical resistance, ideal for long-term storage of liquids.NS stopper made of PPWith square-knob cap and red coreAutoclavable at 121 °C (2 bar) according to DIN EN 285
Soda lime - Laboratory Bottles
Bottles with screw threaded neck. With blue PP screw cap and sealing ring.
Stirred reactor set GL45
The perfect support for your mixing processesProperties:Driven using standard magnetic stirrersVariable stirrer shaft, can be used for DURAN® GL 45 laboratory bottlesCan be used up to 500 rpmEntirely autoclavableTemperature resistant up to 140 °CCompatible with proven DURAN® connection systems; can fit tubing from 1.6 mm to 6.0 mm i.d.Significantly improved, thorough mixing compared to standard magnetic stirring barMaterials used PP/PTFE/PEEK/stainless steelParts in contact with media fully conform to FDA requirementsApplication:The above-mentioned properties make the DURAN® stirred reactor ideal for the widest possible range of mixing processes in laboratories, e.g. mixing liquids or dissolving solids. The connections available allow introduction of media into the bottle or removal during mixing.The whole assembly is autoclavable, so that it can be used in biological applications, for example simple fermentation processes. With the aid of components from the DURAN® connection system extra media bottles can be attached, or a sterile pressure release fitted.Scope of supply: DURAN® bottle GL45, folding magnetic stirrer, GL45 PP cap with 2 x GL14 ports, 2 x GL14 PBT caps red
Syringe Filter with connector
Syringe Filter (0.2 μm) with connector, non-sterile 0.2 μm filter and female Luer Slip to 5.8 mm maleconnector, with o-ring seal.
Tamper-evident screw caps, PP
Tamper-evident screw caps for Laboratory bottles with DIN thread. Temperature resistance: max. 140°C.The integral plastic ring tears when the cap is first opened and is retained on the bottle neck. Therefore it can be clearly seen whether the bottle retains its original seal. After first untwisting, can be used as "normal" screw cap.
Threaded bottles, soda-lime glass, brown, with screw cap
The ethylene acrylate coating reduces hazardous glass splintering during breakage. The maximum operating temperature for coated bottles is 80 °C. To preserve the coating, do not clean at temperatures exceeding 60 °C.
VITgrip™ lab bottles, PP, GL 45
Allround lab bottle made of polypropylene, with GL 45 thread and supplied with tamper-evident closure (PP).Excellent handling due to innovative design. In contrast to common lab bottles, the slim, waisted shape facilitates the handling of the VITgrip™ to a considerable degree. The molded volume graduations support slip-safety while working with glovesLeakproof** due to optimized sealing system of the bottle thread and the screw cap with ergonomic designEasy readability of the volume at all times due to molded, double-sided graduations with high accuracy (± 5%)Smooth pouring of liquids and easy to clean due to hydrophobic material and rounded shape without dirt catching edgesWith tamper-evident closure that reliably signals, if the bottle is still sealedAutoclavable at 121°C (2 bar) according to DIN EN 285Very good chemical resistance against most acids, bases and alcoholic solutions. Furthermore, the VITgrip™ lab bottles and the supplied VITLAB® tamper-evident closures are suitable for contact with foodstuffs (according to regulation EU No. 10/2011).**The VITgripTM lab bottles are leakproof (tested with distilled water at room temperatur and atmospheric pressure and in combination with the supplied VITLAB® screw closures. Please contact us for the detailed test conditions, if required.
Wide mouth bottles Nalgene™ Economy, HDPE, with screw cap, PP
Nature, leak-proof. Round, thin-walled and soft wide-mouth bottles for general laboratory work. Good chemical resistance to a wide range of acids, bases and alcohols.
Wide mouth bottles Nalgene™ PMP, with screw cap, PP
The transparent wide-mouth bottles can be used in the temperature range from 20 ° to 175 ° C. They are leak-proof and chemical resistant. They resist repeated autoclaving up to 150 ° C.
Wide mouth bottles Nalgene™, fluorinated HDPE, with screw cap, PP
Fluorinated wide-mouth bottles made of HDPE with fluorinated white screw caps made of PP. Leak-proof. Suitable for sampling and short-term use as extraction bottle for the EPA method.
Wide mouth bottles Nalgene™, HDPE, with closure, PP
Thick-walled bottles for storing and shipping liquids and dry chemicals.NaturalISO Standard 13485: 2003USP class VIUS Standard 21CFR177.1520
Wide mouth bottles Nalgene™, LDPE, with screw cap, PP
Natural, shockproof and leak-proof. Suitable for shipping liquids and storing chemicals and standards. Chemical resistance to most acids, bases and alcohols.
Wide-mouth bottle Nalgene™ Economy, HDPE, with screw cap, PP
Economical, ruggedly constructed bottle. Guaranteed leakproof for safe sampling, shipping and storage. Translucent bottle allows viewing of liquid level. EPA-specified sample bottle material for a wide variety of inorganic compound and elemental analyses.
Wide-mouth bottle Nalgene™ Economy, HDPE, with screw cap, PP, brown
Protects light sensitive samples from UV/VIS light transmission during sampling, shipping or storage. Wide mouth allows easy retrieval of grab samples and reduces turbulence when filling. Single-use sample bottle. Leakproof.
Wide-mouth bottle Nalgene™ Economy, PPCO, with screw cap, PP
General-purpose, single-use sample bottle. Leakproof. Autoclavable.
Wide-mouth Bottle Nalgene™ PassPort IP2, HDPE, with screw cap, PP
Safe, durable, cost-efficient line of wide-mouth bottles for packaging and transporting hazardous materials. Recommended for customers who are designing, assembling and certifying their own combination packaging. Split and puncture resistant. Wide mouth allows for easy filling of dry materials or liquids. Heavy duty walls. Moulded into base: IP2 marking, material, volume, registration notch and the Nalgene® brand name. Evaluated at 15 psi (103 kPa) per 49 CFR 173.27 (c) (2), ICAO Technical Instructions Part 3-1;1.1.6.1, and IATA Dangerous Goods Regulations Section 5.0.2.9. Leakproof.
Wide-mouth bottles GLS 80®, DURAN® amber glass
Temperature-resistant, bottle can be used up to 500°C (for short periods), screw cap and pouring ring up to 140°C. Protects light-sensitive media from light wavelengths between 200nm to 470nm. Unaffected DURAN® properties within the bottle, as colour is only applied on the outer surface. Very uniform, durable and chemically resistant amber colour due to innovative technology. With 80mm wide mouth screw thread. Ideal for applications with powders and granules, easy filling and emptying. Neutral glass/Type I glass acc. to USP/EP and JP. With Retrace Code (Batch Identification). Certificate available via the Internet. Autoclavable.
Wide-mouth bottles Nalgene™, FEP, with screw cap, ETFE
Transparent. Highest temperature, chemical and corrosion resistance. Easy handling through wide neck. Especially suitable for trace element analysis and applications with organic solvents. Autoclavable (cap should be unscrewed before autoclaving)LeakproofTemperature resistant from -105 to 150°CIndividually packed* white polypropylene screw cap with PTFE liner.
Wide-mouth bottles Nalgene™, fluorinated HDPE, with screw cap, fluorinated PP
Safe, durable, cost-efficient line of fluorinated wide-mouth bottles. Fluorinated surface provides improved barrier properties and reduces solvent absorption and permeation. Fluorination enhances long-term container performance, prevents material loss due to permeation and yields lower extractables. Wide mouth design allows for easy filling and dispensing of solid and liquid materials. Split- and puncture-resistant. Recyclable. Leakproof.
Wide-Mouth Bottles Nalgene™, HDPE with screw cap, PP
Durable, general-purpose bottles with countless applications in the lab or field. Translucent. Wide mouth is easy to fill with dry materials or liquids. Excellent chemical resistance to most acids, bases and alcohols. Can be used in freezer - use to -100 °C. Suitable for shipping liquids. Leakproof with PP screw cap.
Wide-mouth bottles Nalgene™, HDPE, with screw cap, HDPE
Natural colour. Wide-mouth bottles with white HDPE closure. Suitable for collecting water samples for microbiological analysis. Wide mouth facilitates filling. Each bottle is individually barcoded with lot number and container number.LeakproofSterileMeet the EPA requirements for metals, cyanide and fluoride
Wide-mouth bottles Nalgene™, HDPE, with screw cap, PP
Helps protect light-sensitive materials during shipping or storage. Bottles comply with U.S. Pharmacopoeia 23 requirements for maximum light transmission. Easy-to-fill wide mouth. Excellent chemical resistance to most acids, bases and alcohols. Good for freezer storage to -100°C. Leakproof.
Wide-mouth bottles Nalgene™, PPCO, with screw cap, PP
Transparent. Rigid wall. For general laboratory use.Autoclavable (cap should be unscrewed before autoclaving)LeakproofWithstands temperatures up to 121°C