Antistatic Explosion Proof Tubing
Made in a compound of pure PTFE and fine carbon dust.Main characteristics: good conducting capacity, high chemical resistance (except of substances with high reactivity to carbon), load resistance 106 ohm/m, black.Temperature: -200 °C to 250 °C
Explosion proof tubing, PTFE-EX
Explosion proof tubing, made of electric conductivity PTFE-EX, for solvents and easy flammable substances.
Fabric-reinforced tubing, PVC
Transparent. PVC with terylene mesh reinforcement. Certificated by German TÜV with due regard to regulatory of DIN EN ISO 5774:2008. Proofed by BGVO directive 2002/72/EC bis 2008/39/EC for food contact. Durometer 77 Shore A. Supplied per meter.
Flex tubing, PFA
Corrugated tubing with circular corrugations around the longitudinal axis and cylindrical tubing ends with a length of 40mm which can for example be connected directly to fittings, stopcocks or hose connectors. Together with BOLA Laboratory Screw Joints, the connection is tight and suitable for vacuum.Highly flexibleTight bending radius only causes little cross-section reductionNon-porousTransparentIdeal for connections under vibrationsUsable with a small bending radiusFor compensation of thermal expansionsFor easy handling of liquidsSpecial lengths available on request
Laboratory tubing Isoflex, PVC
Autoclavable, transparent and non-toxic, non ageing and non oxidising. Packed in PE bags. The tubing is marked every metre. Good resistance against strong acids and akalis, fair resistance against organic solvents. Durometer 77 Shore A.
Nominal tubing for pumps, Tygon® LMT-55 without collars
Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
Peristaltic pump tubing E-LFL with 2 colour-coded bridges
Long flex life, high-precision tubing with 2 colour-coded bridges. Broad resistance to acids and alkalis. With precison bore to allow accurate dispensing and flowrates. Colour-coding as indicated.
Peristaltic pump tubing E-LFL with 3 colour-coded bridges
Long flex life, high-precision tubing with 3 colour-coded bridges. Suitable for peristaltic pumps and for food and beverage dispensing. Contains no BPA or phthalates. Broad resistance to acids and alkalis. Meets USP Klasse VI and ISO 10993.
Plastic tubing cutter
A replaceable, hardened steel blade makes clean, straight cuts.
Pump tubings Tygon®SI 3350, with 2 colour-coded bridges
Silicone tube, platinum-cured. Meets FDA and USP Class VI and ISO 10993. 6.266 859 without bridges.
Rubber Tubing, Viton®
Fluoroelastomer Rubber (FPM), blackTemperature range -10 to over 200 °CGood resistance to ozone and weathering, as well as benzine and mineral oilDurometer 75 Shore ASupplied per meter.
Tubing cutter
Blade made of stainless steel 1.4301, handle made of PP. For cutting tubes up to 10 mm diameter.
Tubing Iso-Versinic
Synthetic fluoroelastomer. Chemically resistant to hydrocarbons (aromatic and aliphatic), oils, strong acids, oxidizing agents and chlorous solvents. Excellent resistance to abrasion and flexing. Good ozone and radiation protection. Impermeable to gas and steam. Shore A, Density 1.9. Temperature range -20 °C to 200 °C (up to 300°C for short periods). Elongation at tear >250%. Suitable for transporting corrosive liquids.
Tubing Norprene® A 60 G
Black, thermoplastic elastomer, Shore A 61. Suitable for use as tubing for peristaltic pumps. High endurance. Resistant to many aggressive chemicals.Temperature range -60 to 135 °CSuperior weatheringAbrasion resistantLow gas permeability versus rubber tubingOzone (300 pphm) and UV light resistant
Tubing Pharmed®
Thermoplastic elastomer, beige, Shore A 64. Can be used at temperatures from -51 to 135 °C. Can be autoclaved repeatedly, and non toxic. To USP Class VI. Fulfills FDA and NSF criteria. Suitable for laboratory, medical and research work, e.g. cell culture application. Significantly less gas leakage than silicone. Long working lifespan when used in peristaltic pumps. Ozone and UV resistant. Very good chemical resistance.
Tubing PharMed® BPT with three colour-coded bridges
Shore A 64. The tubings have been formulated to withstand the rigors of peristaltic pumping action while providing the biocompatible fluid surface required in sensitive bioprocess applications. Resistant to repeated CIP and SIP cleaning and sterilization. Complies with USP Class VI and FDA and the documented biocompatibility according to standard 10993. Autoclavable.
Tubing PharMed® BPT with two colour-coded bridges
Shore A 64. The tubings have been formulated to withstand the rigors of peristaltic pumping action while providing the biocompatible fluid surface required in sensitive bioprocess applications. Resistant to repeated CIP and SIP cleaning and sterilization. Complies with USP Class VI and FDA and the documented biocompatibility according to standard 10993. Autoclavable.