Aluminium foil
Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.
Aluminium foil, dispenser box
Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.
Aluminium foil, refilling roll
Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.
Aluminium foil, short rolls in carton dispenser
Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.
Aluminium foil, Toppits®
For transporting or keeping food fresh.TearproofHeat resistantEasy handling by tear-off sawAlso available extra wide
Aluminium Pop-up sheets
Embossed pure aluminium foils, extremely tare resistent.Handy for everyday useHeat-resistant up to 600°CAir-tight and a barrier to lightDimensions (sheet): 230 mm x 270 mm200 sheets in a box
Bench protection paper, LabSorb, rolls
LabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.Other formats and sizes are available on request.
Bench protection paper, LabSorb, sheets
LabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.Other formats and sizes are available on request.
Bench protector, Labmat™
White. Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Highly absorbent upper surface. Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions. Simply roll up and discard after contamination.
Bench protectors, PTFE
Ideal for using as table pad or for lining drawers. Also suitable for using as slideway or for insulation. White foil with universal chemical resistance, temperature resistance from -200 to 250 °C.Rolls of 1 m.
Benchkote surface protector®, Block à 50 sheets
The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
Benchkote surface protector®, rolls
The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
Benchkote surface protector®, sheets
The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
Bytac® Bench protectors
Bytac® Bench protectors, FEP Film with Vinyl or Aluminum Backing. Inert to most chemicals - Non-stick; easy to clean - Use to resurface bench tops and line fume hoods. Contrasting work surface for viewing color changes during titrations. Protects surfaces against absorption of radioactive chemicals. Vinyl backing is recommended for all applications up to 93°C. Aluminium foil-backing is resistant to high temperatures up to 182°C for up to one hour.
Cling film Toppits®
Easy to use and better adhesionOur best freshness protectionSlight initial determinationVery easy to rollParticularly strongWith time beginning FinderTear-off cap box with stableRole of fixation for easy rolling
Cord string bag, LDPE
Transparent and resealable packaging bag with a film thickness of 50 µm.Food-safeFreeze-resistantHeat-resistant up to 60 °CTearproofWith white doublestring
Cutter for sealing film
The handy Cutter is convenient for clean storage and cutting of sealing film such as BRAND Seal-R-film™. Suitable for 50 mm and 100 mm wide rolls.
Desk protector, cork
Made from natural agglomerated cork which can be easily cleaned. Non-allergenic, anti-fungal, anti-bacterial and antistatic material. Heat and erosion resistant and also reduces noise and vibration.
Dispenser for Parafilm®, ABS
For safe and easy cutting of 1 x 100 mm or 2 x 50 mm width parafilms. The cutting blade can easily slide in both directions providing a clean and uninterrupted cut.
Electromagnetic table-top sealers polystar®
For polyethylene films up to 2 x 0.40 mm thickness.Seal width:3 mmCurrent input 401 M: 601 M: 3.0 A 7.0 APower consumption 401 M: 601 M: 0.8 kWh 1.5 kWhMains supply:230 V / 50 Hz* Seal length max. (mm)
Heat Sealer with Cutter
For sealing polyethylene or polypropylene bags, sheets or flat tubing from 0.01 to 0.8 mm thickSliding blade removes excess material 19 mm from the seal.Timing knob ensures safe sealingHeating element measures 310 mm long and is only hot when sealingScope of supply: 2 extra blades, 2 extra heating elements and 2 extra PTFE cloths
Heat sealers polystar® 243
For welding all polyethylene, polypropylene, cellulose or polyamide foils up to a thickness of 2 x 0.25 mm. Expandable with a plug-in table and a film roll-off device. M model sealers have an additional holding magnet as well as a welding and cooling automatic.SpecificationsSealing length:250 mmSealing width:1.5 mmPower consumption: Power output:0,6 A / 1,2 A* 0,14 kWh / 0,28 kWh*Dimensions:420 x 120 x 135 mmPower supply:230 V, 50 Hz*M-models
Heat sealers polystar® 423 M / 583
For welding all polyethylene, polypropylene, cellulose or polyamide foils up to a thickness of 2 x 0.25 mm. Expandable with a plug-in table and a film roll-off device. With cutting device and double-sided heating tape clamping device. M model sealers have an additional holding magnet as well as a welding and cooling automatic.Specifications423 M / 583Sealing length:440 mm / 600 mmSealing width:1.5 mmPower consumption: Power output:1.3 A 0.29 kWh / 0.3 kWhDimensions:720 x 120 x 135 mm / 880 x 120 x 135 mmPower supply:230 V, 50 Hz
Impulse generator polystar®120 GE
For impulse heat sealing tongs 9.106 837 and 9.106 838.Electric current requirement:3.7A max.Power consumption:approx. 0.1kW/hrSupply requirements:220V 50Hz