Photometer PrimeLab 2.0 starter-kit, all parameters activated
The photometer with 18 different wavelengths (3 sensors with 6 wavelengths) covers the full VIS-spectrum as well as key parts of UV and IR spectrum. LEDs are set up at 180° as well as at 90° to enable NTU-Turbidity, PTSA and Fluorescein measurements as well.5.5" colour HD touch-displayMore than 140 different parameter methodsPlease order reagents separatelyAuto-calibration functionIntelligent OTZ (One-Time-Zero) functionCan be used with 1 ml, 16 mm and 24 mm cuvettesData management with free software (LabCOM) / app in free cloud including individual accounts and reporting systemScope of supply:Multitest Photometer PrimeLab 2.0, carrying case, 10 x 24 mm/10 ml glass cuvettes with lid, light-shield, 16 and 24 mm cuvette adapters, stirring rod, 10 ml plastic syringe, cleaning brush, battery-charger with USB-cable (type C), 20 ml luer lock syringe, filter adapter, 2 cans with 50 filter papers, 100 ml can with lidSpectral range:390 ... 950 nm, 18 wavelengthsAmbient temperature:5 ... 45 °CRel. humidity:30 ... 90 %Internal memory:150000 measurementsDatatransfer:WiFi, GSMSoftware:LabCOM software, LabCOM App, LabCOM CloudPower supply:8500 mA Li-Io battery, 5 V power supply with adaptersWarranty:2 years
Photometer PrimeLab 2.0 starter-kit, all parameters activated, except turbidity (NTU)/PTSA/fluorescein
The photometer with 18 different wavelengths (3 sensors with 6 wavelengths) covers the full VIS-spectrum as well as key parts of UV and IR spectrum. LEDs are set up at 180° as well as at 90° to enable NTU-Turbidity, PTSA and Fluorescein measurements as well.5.5" colour HD touch-displayMore than 140 different parameter methodsTurbidity (NTU)/PTSA/fluorescein is not activatedPlease order reagents separatelyAuto-calibration functionIntelligent OTZ (One-Time-Zero) functionCan be used with 1 ml, 16 mm and 24 mm cuvettesData management with free software (LabCOM) / app in free cloud including individual accounts and reporting systemScope of supply:Multitest Photometer PrimeLab 2.0, carrying case, 10 x 24 mm/10 ml glass cuvettes with lid, light-shield, 16 and 24 mm cuvette adapters, stirring rod, 10 ml plastic syringe, cleaning brush, battery-charger with USB-cable (type C), 20 ml luer lock syringe, filter adapter, 2 cans with 50 filter papers, 100 ml can with lidSpectral range:390 ... 950 nm, 18 wavelengthsAmbient temperature:5 ... 45 °CRel. humidity:30 ... 90 %Internal memory:150000 measurementsDatatransfer:WiFi, GSMSoftware:LabCOM software, LabCOM App, LabCOM CloudPower supply:8500 mA Li-Io battery, 5 V power supply with adaptersWarranty:2 years
Photometer PrimeLab 2.0 starter-kit, with turbidity (NTU)
The photometer with 18 different wavelengths (3 sensors with 6 wavelengths) covers the full VIS-spectrum as well as key parts of UV and IR spectrum. LEDs are set up at 180° as well as at 90° to enable NTU-Turbidity, PTSA and Fluorescein measurements as well.5.5" colour HD touch-displayMore than 140 different parameter methods (paid activation required)Please order reagents separatelyPreactivated parameters: turbidity (NTU)Auto-calibration functionIntelligent OTZ (One-Time-Zero) functionCan be used with 1 ml, 16 mm and 24 mm cuvettesData management with free software (LabCOM) / app in free cloud including individual accounts and reporting systemScope of supply:Multitest Photometer PrimeLab 2.0, carrying case, 4 x 24 mm/10 ml glass cuvettes with lid, light-shield, 24 mm cuvette adapter, stirring rod, 10 ml plastic syringe, 1 x 1 - 10 ml lab pipette with 2 tips, 1 x NTU-Turbidity calibration kit, cleaning brush, battery-charger with USB-cable (type C), printed user manualSpectral range:390 ... 950 nm, 18 wavelengthsAmbient temperature:5 ... 45 °CRel. humidity:30 ... 90 %Internal memory:150000 measurementsDatatransfer:WiFi, GSMSoftware:LabCOM software, LabCOM App, LabCOM CloudPower supply:8500 mA Li-Io battery, 5 V power supply with adaptersWarranty:2 years
Photometer system MD 600 / MD 610
Modern, mobile photometers for rapid, reliable water testingAll important water analysis parameters from Aluminium to Zinc are covered by these two devices. Combined with the high precision of Lovibond® reagents, a reliable and quick analysis of water samples is guaranteed. Reagent tablets, powder reagents, liquid reagents, or cuvette tests are used depending on the method. Please order separately. Six long-lasting LEDs serving as a light source in combination with interference filters guarantee the highest precision. The devices are designed without moving optical parts and thus have a maintenance-free measuring unit. Up to 1000 data records can be stored in the MD 600, MD 610 stores 500 data records.Highest/reproducible precision with interference filterDisplay with background lightingMore than 120 pre-programmed methodsAutomatic selection of wavelengthUser guidance in German, English, French, Spanish, Italian, Portuguese, PolishBuffer for up to 1000 data recordsMore than 35 user-specific methods possibleWaterproof housing (as defined in IP 68, 1 hour at 0.1 meter)Handheld format, portableMD 600 only: Infrared interfaceMD 610 only: Bluetooth interface for connection to smart phones and tabletsCost-free iOS®- and Android™-App for data management and email deliveryScope of supply: The instrument is supplied complete and ready-to-use in a carrying case, incl. 4 batteries, 3 vials diam. 24 mm, 3 vials diam. 16 mm, 1 adapter each for 16 mm and 13 mm vials.Please order reagents separately.SpecificationsOptics:High-quality Interference FiltersPower Supply:4 batteries (Mignon AA/LR6)Operation time:approx. 26 hours; continuous operation or 3500 testsDimensions ( W x D x H):approx. 210 x 95 x 45 mm (unit) approx. 395 x 295 x 106 mm (case)Wavelengths:530 / 560 / 610 / 430 / 580 / 660 nmWavelength Accuracy:±1 nmPhotometric Accuracy:0.005 A
Photometer system MultiDirect
With Dual Beam Technology. The MultiDirect is a modern, microprocessor-controlled photometer with ergonomically designed keypad and large-format graphic display. It is equipped with a wide range of pre-programmed methods (e.g. ammonia, COD, phosphate) based on the proven range of Lovibond® tablet reagents, liquid reagents, vial tests and powder reagents. The calibration and software-supported control options mean that the unit is also suitable for use as a testing instrument. The seven standard rechargeable batteries (supplied) ensure easy mobile use.Wide range of pre-programmed methodsLarge, graphics displayRS232 interfaceSuitable for use with standard rechargeable batteriesUpdates for new methods and languages via the Internet1000 data set memoryCustom method recall is also possibleScope of supply: MultiDirect, ready-to-use incl. 7 x rechargeable batteries and battery charger for 100 - 240V, 3 each 24mm and 16mm cuvettes, 16mm cuvette adapter, 3 x syringes, 1 x 100ml plastic beaker and case with waterproof insert. Without reagents and without battery (please order separately).Verification Standard Kit: The verification standard kit for the MultiDirect is designed to reassure the user about the accuracy and the reliability of the results. The shelf life of the standard kit is two years from the date of production, provided that storage and use are in accordance with the instructions provided. Measurements are taken in mAbs.Specifications Optics: Dual-Beam Technology, High-quality Interference FiltersMeasuring time: Power supply:approx. 10 seconds 7 Ni-MH-battery pack (1.5V AA), charged in the unit using external power packDimensions (W x D x H): Ambient operating conditions: Approval:265mm x 70mm x 195mm up to max 90 % humidity (non condensing), approx. 5 ... 40 °C CEWavelengths:430/ 530/ 560/ 580/ 610/ 660nm
Photometers MD 100
The Lovibond® MD 100 Photometers are designed for analysis of different parameters in drinking water, industrial process water and waste water. With a total of more than 30 different types, instruments are available for routine testing as well as for special applications. The MD 100 uses high quality interference filters with long-life LEDs as a light source without any moving parts in a transparent sample chamber. The units supply accurate, reproducible results very quickly. Other major advantages include ease of operation, ergonomic design, compact dimensions and safe handling. Provided with calibration and software-based adjustment options the MD 100 is suitable for use as a testing instrument. The tests are conducted using either Lovibond® tablet reagents with long-term stability and a shelf life of 5 or 10 years, VARIO powder reagents or using liquid reagents.Optics: High-quality Interference FiltersWavelength accuracy: ±1 nm.Power supply: 4 micro batteries (AAA), capacity approx. 17 hours or 5000 tests.Automatic switch-off.LCD Display (backlit on keypress).Internal ring memory for 16 data sets.Dimensions (L x W x H): 155 x 75 x 35 mm.Scope of supply: Photometer in a plastic carrying case, with reagents for 100 tests, cells, batteries and standard accessories.Optional: IRiM - infrared interface module for data transfer to computer or printer.*Delivery without reagents for measuring range 0.1 - 10 mg/l Cl2.**24mm diam. glass cell***10mm diam. multi cell-2
Photometers MD 100 Boiler Water/Cooling Water
Photometer instruments, specially designed for cooling and boiler water analysis. Thanks to the handy format and the user-friendly indicator chemistry, most of the important parameters can be determined on site. The photometers are supplied pre-calibrated with test methods, simply add the appropriate Lovibond® reagent sets (tablets, powder packs and liquids).Scroll MemoryAutomatic Switch-OffReal-Time-Clock and DateCalibration ModeBacklit DisplayStorage FunctionOne Time Zero (OTZ)Waterproof (IP 68)Scope of supply: instrument in a sturdy plastic case, batteries, 3 glass vials, standard accessories, instruction manual.Please order reagents separately! Please pay attention that some reagents could be used for Boiler Water or Cooling Water only.OpticsLEDs, interference filters (IF) and photo sensor in transparent sample chamberWavelength Accuracy± 1 nmPhotometric Accuracy Photometric Resolution3% FS (T = 20°C - 25°C) 0,01 APower Supply4 micro batteries (AAA), capacity approx. 17 hours or 5000 testsAuto-Offautomatic switch-offDisplaybacklit LCD (on keypress)Storageinternal ring memory for 16 data setsInterfacesinfrared interface for test data transferAdditional Featurereal time clock and dateCalibrationfactory calibration and user calibration. Reset to factory calibration possibleDimensions155 x 75 x 35 mm (L x W x H)Weightbasic unit approx. 260 gEnvironmental conditionstemperature: 5 - 40 °C, rel. humidity: 30 -90% (non condensing)
Photometers MD 110
Photometer for the analysis of determined parameters in drinking, industrial and waste water. Different models are available for common analyses as well as for special applications.Ergonomic, waterproof designAccurate, reproducible measurement resultsUser calibration and single point calibrationMeasurement results are displayed directly in ABS or %TZero value remains valid for all tests with the same sample thanks to the one-time zero (OTZ) functionAutomatic storage of measured values with time and date stamp and optional data transfer (IRiM module)Bluetooth® interfaceScroll memoryAutomatic shutdownAdjustment function displayScope of supply: Photometer, carrying case, reagents for 100 tests, cuvettes, batteries, standard accessoriesFurther photometers available on request.SpecificationsOptics:Highly precise interference filters, LEDWavelengths:530 / 560 / 610 / 430 / 580 / 660 nmWavelength accuracy:±1 nmPhotometric range: pH:0.005 A 6,5 - 8,4Data memory:16 measurementsDimensions (W x D x H):75 x 155 x 35 mmWeight:260 gPower supply:4 x AAA micro batteriesIP code:IP 68
Photometers MD 110
Photometer for the analysis of determined parameters in drinking, industrial and waste water. Different models are available for common analyses as well as for special applications.Ergonomic, waterproof designAccurate, reproducible measurement resultsUser calibration and single point calibrationMeasurement results are displayed directly in ABS or %TZero value remains valid for all tests with the same sample thanks to the one-time zero (OTZ) functionAutomatic storage of measured values with time and date stamp and optional data transfer (IRiM module)Bluetooth® interfaceScroll memoryAutomatic shutdownAdjustment function displayScope of supply: Photometer, carrying case, reagents for 100 tests, cuvettes, batteries, standard accessoriesFurther photometers available on request.SpecificationsOptics:Highly precise interference filters, LEDWavelengths:530 / 560 / 610 / 430 / 580 / 660 nmWavelength accuracy:±1 nmPhotometric range: pH:0.005 A 6,5 - 8,4Data memory:16 measurementsDimensions (W x D x H):75 x 155 x 35 mmWeight:260 gPower supply:4 x AAA micro batteriesIP code:IP 68
Photometers MD 200
Benchtop devices suitable for mobile use. For precise water control through high-precision optics and high-quality interference filters with long-term stable LEDs as light sources.Automatic shutdownReal time clock and dateAdjustment function displayIlluminated LCD-displayFurther photometer versions available on request.SpecificationsMeasurement cycle:approx. 3 seconds (method dependent)Optics:Temperature compensated LED and photosensor intensifier in a waterproof sample chamberKeyboard:4-key polycarbonate film, splashproofDimensions (W x D x H):110 x 190 x 55 mmWeight:455 gPower supply:4 x AAIP code:IP 68pH:6.5 - 8.4
Photometers MD 200
Benchtop devices suitable for mobile use. For precise water control through high-precision optics and high-quality interference filters with long-term stable LEDs as light sources.Automatic shutdownReal time clock and dateAdjustment function displayIlluminated LCD-displayFurther photometer versions available on request.SpecificationsMeasurement cycle:approx. 3 seconds (method dependent)Optics:Temperature compensated LED and photosensor intensifier in a waterproof sample chamberKeyboard:4-key polycarbonate film, splashproofDimensions (W x D x H):110 x 190 x 55 mmWeight:455 gPower supply:4 x AAIP code:IP 68pH:6.5 - 8.4
Photometers MD 200
Benchtop devices suitable for mobile use. For precise water control through high-precision optics and high-quality interference filters with long-term stable LEDs as light sources.Automatic shutdownReal time clock and dateAdjustment function displayIlluminated LCD-displayFurther photometer versions available on request.SpecificationsMeasurement cycle:approx. 3 seconds (method dependent)Optics:Temperature compensated LED and photosensor intensifier in a waterproof sample chamberKeyboard:4-key polycarbonate film, splashproofDimensions (W x D x H):110 x 190 x 55 mmWeight:455 gPower supply:4 x AAIP code:IP 68pH:6.5 - 8.4
Plastic stopper, PPC
Plastic stopper with NS 19, PPC, for Karlsruher BOD bottle
Pocket Colorimeter DR300
Portable single parameter handheld meter for on-site water analysis. Optional Bluetooth® connectivity allows secure transmission of measurement data to Claros.LCD display with backlightMemory for 50 measurementsBattery operation for a maximum of 5000 testsSturdy designScope of supply: Pocket Colorimeter, carrying case, batteries, sample cuvettes, manualReagents are not included in the scope of supply. Please order separately.Detector:Silicon photodiodeAbsorbance:0 ... 2.5 AbsDimensions (W x D x H):69 x 157 x 34 mmWeight:0.25 kgIP code:IP67Power supply:4 x AAA batteries
Pollution monitor 3500+
Pollution monitors for collecting gases and vapours in the ambient atmosphere. Ideal for detecting pollutant concentration in the workplace. The 3M™ Pollution monitor is equipped with a single charcoal adsorbent wafer that binds pollutants in the air by means of diffusion.Suitable for personal and area monitoringEasy to use: the pollution monitor can simply be clipped onto clothingSmall and lightweight
Portable gas detectors series 04
Portable gas monitors to detect gases in the surrounding atmosphere. They measure concentrations of toxic gases and oxygen in the atmosphere and issue an alarm when gas concentrations reach preset levels. The alarms are indicated by flashing lamp, intermittent audible buzzer, flashing gas concentration readout and vibration.LCD displayR-sensor and CO-sensor with H2-reductionRobust constructionWater- and dust-proofBattery or rechargeable battery operationSpecificationsGas alarm:STEL Alarm, TWA Alarm, OverAlarm volume:80 dbHumidity:0 ... 95 % RH (OX-04G: 10 ... 90 % RH)Detection principle:Electrochemical type (OX-04G: galvanic cell type)Dimensions (W x D x H):54 x 24 x 67 mmWeight:93 gPower supply:2 x AAA alkaline batteries, or 2 x AAA rechargeble batteries (Ni-MH)Protection class:IP 66/67Warranty (sensor):3 years (OX-04G: 1 year)
Powdered milk butyrometer, borosilicate glass
Powdered milk butyrometer according to Teichert’s method.
Pre-treatment cartridges Progard® for water purification systems
The pre-treatment cartridges contain polyphosphates, activated carbon and depth filter for water pre-treatment and serve to protect reverse osmosis membrane against organic fouling, chlorine oxidation, and mineral scaling.
Precision butyrometer, borosilicate glass
Precision butyrometer for drinking milk and vat milk, frosted rear scale wallfault tolerance 0.025 %
Premium pouring ring for Premium screw cap, TpCh260
Colourless pouring ring TpCh260, height 4mm. Temperature resistant from -196°C to +260°C.
Premium screw cap, PFA
With PTFE coated silicone seal. Colourless (to avoid risk of leaching) and temperature resistant from -196 °C to 200 °C. Ideal for dry sterilization. USP/FDA standard conformity. DFM available on request. Autoclavable. With Retrace code (Batch Identification). Certificate available via the internet.
Pure and Ultrapure water purification system Barnstead™ Smart2Pure™ Pro UV/UF, ASTM I and II
The compact system converts tap water into ultrapure water (ASTM Type I) and pure water (ASTM Type II) via the filtration cartridge and UV/UF units. The integrated recirculation pump and the sterile ventilation filter protect against contamination and ensure tank water quality.Mounting on the laboratory bench or on the wallLeak detectorWarning message when consumable change is necessaryEasy cleaning due to bottom outlet and large openingTiltable display with simplified user interfaceCode-protected system parametersKit contains a 0.1 µm end filterHand dispenser with 3 m cord optionally available.Ultrapure water specifications ASTM Type 1Flow rate: Conductivity:1.0 l/min 0.055 µS/cmResistance at 25 °C: TOC value:18.2 MΩ x cm 1 ... 5 ppbEndotioxins: RNase:0.001 EU/ml 0.003 ng/mlDNase: Bacterial content:0.4 pg/µl 0.01 CFU/mlParticles 0.2 µm/ml:1Pure water specifications ASTM Typpe IIPermeate flow rate: Conductivity:16 l/h 0.067 ... 0.1 µS/cmResistance at 25 °C: Retention rate bacteria, particles:1 ... 10 MΩ x cm 99 %SpecificationsOperating pressure: Interface:1 ... 6 bar RS232Feedwater connector: Dimensions (W x D X H):3/4" NPT and 1/2" NPT 305 x 300 x 545 mmPower consumption: Power supply:0.12 kW 100 ... 240 VAC, 50 / 60 Hz