Mini-cartridge filters, Sartobran-P
Mini-cartridge filters are inserted into a stainless steel housing. The bayonet closure provides a secure seal against back-pressure surges. An inner O-ring seals the lower part of the housing (except for the aeration housing). For the filtration of larger volumes and for long service lives. Individually tested. Their integrity can be checked at any time. Can be autoclaved repeatedly.Heterogeneous double membrane of cellulose acetate, for the sterile filtration of liquids. Pore size pre-filter 0,45 µm.
Mini-cartridge filters, Sartofluor
Mini-cartridge filters are inserted into a stainless steel housing. The bayonet closure provides a secure seal against back-pressure surges. An inner O-ring seals the lower part of the housing (except for the aeration housing). For the filtration of larger volumes and for long service lives. Individually tested. Their integrity can be checked at any time. Can be autoclaved repeatedly.Hydrophobic PTFE membrane filter, for the sterile filtration of air and gases.
Mini-cartridge filters, Sartopure-PP3
Mini-cartridge filters are inserted into a stainless steel housing. The bayonet closure provides a secure seal against back-pressure surges. An inner O-ring seals the lower part of the housing (except for the aeration housing). For the filtration of larger volumes and for long service lives. Individually tested. Their integrity can be checked at any time. Can be autoclaved repeatedly.High performance PP fleece prefilters for particle reduction.
Mini-centrifuge mini G
Mini-centrifuge for all applications which do not require high speeds, e.g. micro-filtrations and cell separation. Transparent cover allows constant observation of centrifuge. The mini-centrifuge can be used for both PCR-vessels and PCR-strips. As a safety feature, the centrifuge will run only when the lid is closed. Lid opens easily with the press of a button.Fixed speed of 6000rpmDigital timer adjustable from 1 to 99minIntegrated quick stopFast start-up of speedCompact design and quiet operationRotor exchangeable without toolsEasy operation with touch keypad
Mini-Centrifuge mySPIN™ 12
Bring increased efficiency and user comfort to your lab with Thermo Scientific™ mySPIN™ mini centrifuges. Tool-free rotors and quick-spin options make them fast and easy to use. Benefit from a compact footprint that fits into your workstation and ergnonomic design that stands out. Ideal for microfilter cell separation and HPLC protocols.Compact footprintEasy operationQuiet operation, low vibrationTool-free, quick rotor exchangeQuick-spin featureSupports PCR and clinical and diagnostic applicationsImbalance and tilt safety cut-outSafety interlock lid designed to prevent opening while rotor is turningAbility to perform fast spins with higher RCF requirementsBack-lit, customizable display that can be set for rpm or RCFScope of supply: 12 x 1.5/2.0ml tube rotor, 32 x 0.2ml tube rotor (singles or 4 x 8 strip), 12 tube adapters 0.2ml, 12 tube adapters 0.5ml, universal power adapter, with 4 interchangeable plug type
Mini-Centrifuge mySPIN™ 6
Bring increased efficiency and user comfort to your lab with Thermo Scientific™ mySPIN™ mini centrifuges. Tool-free rotors and quick-spin options make them fast and easy to use. Benefit from a compact footprint that fits into your workstation and ergnonomic design that stands out. Ideal for microfilter cell separation and HPLC protocols.Compact footprintEasy operationQuiet operation, low vibrationTool-free, quick rotor exchangeQuick-spin featureSafety features: unit will not operate without lid in placePalm-shaped lid for left- or right-handed usersQuick tube extractionScope of supply: 6 x 1.5/2.0ml tube rotor, 16 x 0.2ml tube rotor (singles or 2 x 8 strip), 6 tube adapters 0.2ml, 6 tube adapters 0.5ml, storage case for rotors and adapters, tube rack, universal power adapter 110-240V 50/60 Hz, with 4 interchangeable plug type
Mini-Centrifuge Sprout® plus
New SnapSpin™ rotors - a new approach to compact centrifuge use!Introducing the next generation of the Sprout® mini-centrifuge loaded with new features for increased efficiency in the lab. Two new SnapSpin rotors (a six-place standard rotor and an eight-place strip rotor) snap-in and out for fast and easy changes! Plus, two sets of adapters accommodate all major microtube and PCR® tube styles (2.0, 1.5, 0.5, 0.2 mL) for customized use. The Sprout is ideal for microfilter cell separations and HPLC samples. With most spins lasting around 20 seconds, the ergonomically designed lid is specifically designed to fit in the palm of your hand for easy repeat opening and use. Made with UV resistant plastic.Operation is now faster and easier: Snap in rotor, load and close. For repeated spins, simply close the lid to reactivate. An internal safety switch ensures the Sprout will not operate without the lid open.Small size offers minimal benchtop space and removable cord for compact storage.Low noise and vibrationSmall sizeQuick Spin feature for short spinsNumbered tube positionsUnit will not operate without lid in placeLarger lid to accommodate longer and skirted tubes and taller tube lidsPower Adapter with power cords for worldwide usageScope of delivery:Two easy change, tool-free rotors. 1. Circular, one-size rotor for six 1.5- and 2.0ml tubes or use with adapters to spin six 0.5ml tubes. 2. Strip rotor for two 8 x 0.2ml PCR tube strips or 16 x individual 0.2ml PCR tubes. Six 0.2 mL and six 0.5 mL adapters for customized useStorage Case, PP - Keeps rotors and adapters contained and dust-freeTube Rack, PP - Convenient for handling samples before and after quick spins. For 16 x 2.0 / 1.5ml micro centrifuge tubes (diam. 12mm)4 replacement lid o-rings
Mini-Spike®
Vented dispensing pin with swabable needle-free access valve for injections and withdrawals of non-toxic fluids . Protection against the risk of chemical contamination.Mini-Spike® ChemoWith integrated 0.2 µm ventilation filterWith integrated 5 µm particle filterWith snap capMini-Spike® Chemo Vpossesses an integrated two way valve which protects against free-flow when the system is turned upside down.Mini-Spike® Chemo with micro tipoffers a thinner spike to perforate smaller vials to prevent small rubber stoppers from being pushed into the vial.Mini-Spike® 2Vented dispensing pin with swabable needle-free access valve for injections and withdrawals of non-toxic fluids from containersProtection against the risk of chemical contaminationIntegrated air vent making over-pressure release techniques unnecessary
Minicentrifuge MiniSpin® (General Lab Product)
The powerful and user-friendly MiniSpin® microcentrifuge is extremely compact and have a small footprint.Especially quiet due to its carefully balanced driveMaintenance-free motorClear digital displayMinimal sample heating (after 20 min. at max. speed only 12 °C max. )Separate short-spin buttonAutomatic lid openingIntegral power supply unitCapacity: 12 x 1.5 / 2ml containersAutoclavable rotor (121°C, 20min.)Start-up / slow-down time less than 13 secs. (to / from max. speed).Includes standard anodised aluminium rotorTimer can be set for up to 30 minutesThis centrifuges are General Lab Products for research purposes.
Minicentrifuge MiniSpin® plus (General Lab Product)
The powerful and user-friendly MiniSpin® plus microcentrifuge is extremely compact and have a small footprint. MiniSpin® plus provides the speed required for molecular biology separations.Especially quiet due to its carefully balanced driveMaintenance-free motorClear digital displayMinimal sample heating (after 20min. at max. speed only 12°C max. )Separate short-spin buttonAutomatic lid openingIntegral power supply unitCapacity: 12 x 1.5 / 2ml containersAutoclavable rotor (121 °C, 20 min.)Start-up / slow-down time less than 13 secs. (to / from max. speed).Includes "Black Line" aluminium rotorSpeed/rcf display switchTimer can be set for up to 99 minutesPermanent centrifuging optionThis centrifuges are General Lab Products for research purposes.
Minicentrifuges MiniSpin® (IVD)
The powerful and user-friendly MiniSpin® microcentrifuge is extremely compact and have a small footprint.Especially quiet due to its carefully balanced driveMaintenance-free motorClear digital displayMinimal sample heating (after 20min. at max. speed only 12°C max. )Separate short-spin buttonAutomatic lid openingIntegral power supply unitCapacity: 12 x 1.5 / 2ml containersAutoclavable rotor (121°C, 20min.)Start-up / slow-down time less than 13 secs. (to / from max. speed).Includes standard anodised aluminium rotorTimer can be set for up to 30 minutes
Minicentrifuges MiniSpin® plus (IVD)
The powerful and user-friendly MiniSpin® plus microcentrifuge is extremely compact and have a small footprint. MiniSpin® plus provides the speed required for molecular biology separations.Especially quiet due to its carefully balanced driveMaintenance-free motorClear digital displayMinimal sample heating (after 20min. at max. speed only 12°C max. )Separate short-spin buttonAutomatic lid openingIntegral power supply unitCapacity: 12 x 1.5 / 2ml containersAutoclavable rotor (121°C, 20min.)Start-up / slow-down time less than 13 secs. (to / from max. speed).Includes "Black Line" aluminium rotorSpeed/rcf display switchTimer can be set for up to 99 minutesPermanent centrifuging option
Multiple adapter, 2-neck, DURAN® tubing
Made of DURAN® tubing. Acc. to DIN 12594 and in addition to DIN standard, with two parallel necks, with two NS sockets and one NS cone.
Multiple adapters, 2 necks
Made of DURAN®-tubing. With one socket and two cones. One neck 75° downwards.
Multiple Adapters, 2 necks, borosilicate glass 3.3
Side neck parallel with centre neck. 2 x sockets 1 x cone.
Multiple adapters, 2-necks, DURAN® tubing
Made of DURAN® tubing. With two sockets and one cone.One neck 105° upwards.
Nalgene™ Oak-Ridge centrifuge tubes, PC
Transparent. PC with PP screw cap. Can be used in suitable refrigerated or ambient centrifuges, with screw cap at up to 10,000 x g rcf and without screw cap at up to 50,000 x g rcf. Autoclavable. Accessory sealing cap assemblies are available for 10 ml, 30 ml and 50 ml sizes.
Nalgene™ Oak-Ridge centrifuge tubes, PP-copolymer
PP-copolymer with PP screw cap. PPCO is more resistant to chemicals than PC. Autoclavable. When wet, the translucent test-tube enables observation of the contents. Can be used in refrigerated and unrefrigerated centrifuges at up to 50,000 x g rcf. Accessory sealing cap assemblies are available for all sizes.
Needle-valve stopcocks, right-angled, DURAN® tubing
Made of DURAN® tubing. Smooth PTFE plug spindle, with retention device to avoid accidental dismantling. PP screw cap and retention device. Operating temperature -20 °C to 150 °C. Needle-valve stopcocks can be used for accurate dispensing and fit perfectly to glass apparatus.
Needle-valve stopcocks, straight, DURAN® tubing
Made of DURAN® tubing. Smooth PTFE plug spindle, with retention device to avoid accidental dismantling. PP screw cap and retention device. Operating temperature -20 °C to 150 °C. Needle-valve stopcocks can be used for accurate dispensing and fit perfectly to glass apparatus.
Nitrogen flasks with stopcock, borosilicate glass 3.3
NS necks are in compliance with DIN 12242 standards. With angled side neck with PTFE stopcock (2.5 mm hole).
Nitrogen round-bottom flasks (Schlenk-flasks), DURAN®
With an angled side arm with 2.5 mm glass stopcock.
Nitrogen tubes (Schlenk-tubes), DURAN® tubing, with cone
Made of DURAN® tubing. With conical joint and PTFE stopcock.