Joint clips for conical joint sleeve connections, stainless steel, with set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
Joint clips for conical joint sleeve connections, stainless steel, without set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
KECK™ Clips for conical joints, spring steel
For applications with very high temperatures. Easy to fit, dimensionally stable.
Kieselguhr Filter Paper 287, round filters
Recommended for filtration of the finest semi-colloidal turbidities.For separation of very fine semi-colloidal turbidityClarification of extracts of soil suspensions, of milk serum, of starch solutions and sugar-containing solutions prior to polarimetry and refractometryFor retention of protein precipitates and slime particles from solutionsClarification of urine samples
Kjeldahl flasks with ground neck, borosilicate glass 3.3
According to DIN 12360 standard. NS necks are in compliance with DIN 12242 standards.
Kjeldahl flasks, DURAN®
For the determination of nitrogen in organic compounds. With centre neck and conical joint.
Korasilon® silicone high vacuum grease, high viscosity
For use up to 10-6 mbar.
Korasilon® silicone high vacuum grease, medium viscosity
For use up to 10-6 mbar.
KPG stirrer bearings, DURAN®
Interchangeable. Bearing surface ground, polished.
KPG stirrer bearings, DURAN®, with NS cone
Interchangeable. Bearing surface ground, polished.
KPG stirrer shafts, DURAN®, WG 10
DURAN®. Interchangeable. Bearing surface ground and polished. Suitable to be used with flasks with an internal neck diameter of 60 mm or greater.
KPG stirrer shafts, DURAN®, WS 10
DURAN®. Interchangeable. Bearing surface ground and polished. Suitable to be used with flasks with an internal neck diameter of 25 mm or greater.
Laboratory manifold
Laboratory manifold with modular design for microbiological analyses. Thanks to easily interchangeable slip fittings, the manifold can be easily adapted to the work processes. Two manifolds can be connected together using the separately available manifold coupler. The manifold is easy to clean and can be autoclaved.
Laboratory reactor LR 1000 basic System
Modular laboratory reactors designed for optimizing chemical reaction processes as well as for mixing, dispersing and homogenization applications at the laboratory scale. The reactors are especially designed for the unique applications requirements that define the cosmetic and pharmaceutical industries. The temperature of the medium can be as high as 120 °C. The temperature of the heating source, which is located at the bottom of the vessel, is controlled accordingly to reach the set temperature inside the medium. Scope of supply: Basic device, laboratory reactor vessel LR 1000.1, sensor receptacle LR 1000.61, temperature sensor PT 100.30, support rod, 2 hose connectors for cooling hoses
Laboratory reactor LR 1000 control System
Modular laboratory reactors designed for optimizing chemical reaction processes as well as for mixing, dispersing and homogenization applications at the laboratory scale. The reactors are especially designed for the unique applications requirements that define the cosmetic and pharmaceutical industries. The temperature of the medium can be as high as 120 °C. The temperature of the heating source, which is located at the bottom of the vessel, is controlled accordingly to reach the set temperature inside the medium. Prominent features are its intuitive menu navigation, integrated pH and temperature sensor connection as well as several interfaces that allow display and storage of process-relevant data on a PC. By using the optional laboratory software labworldsoft® it is possible to even control the reactor via PC and make further settings. In addition, a control valve connection to attach an optional magnetic valve for program-based cooling water control is integrated.Scope of supply: Basic device, laboratory reactor vessel LR 1000.3, anchor stirrer LR 1000.10, sensor receptacle LR 1000.62, temperature sensor PT 100.30, flow breaker, support rod, 2 hose connectors, USB cable
Laboratory reactor LR-2.ST STARVISC 200
Modularly configured laboratory reactors for the optimisation and reproduction of various chemical reactions, mixing and homogenisation processes on a lab scale. The system is particularly characterised by the agitator mounting, which allows for a safe transfer of the higher motor torque. ULTRA-TURRAX® dispersers, temperature sensors, flow breakers and other accessories can be attached to the open ports of the reactor cover.Suitable for vacuum operationSolvent- and temperature-resistant perfluoroelastomer (FFPM) seals come into contact with sampleInfinitely variable speedTorque trend display for measuring changes in viscosityMicroprocessor-controlled speed regulation, enables steady speed, also under loadRemovable WiCo (wiresless controller) for remote and safe use in a fume hoodScope of supply: Stand system, laboratory stirrer STARVISC 200-2.5 control, safety stop, reactor cover
Laboratory reactor LR-2.ST the Allrounder
Modularly configured laboratory reactors for the optimisation and reproduction of various chemical reactions, mixing and homogenisation processes on a lab scale. The system is particularly characterised by the agitator mounting, which allows for a safe transfer of the higher motor torque. ULTRA-TURRAX® dispersers, temperature sensors, flow breakers and other accessories can be attached to the open ports of the reactor cover.Suitable for vacuum operationSolvent- and temperature-resistant perfluoroelastomer (FFPM) seals come into contact with sampleInfinitely variable speedTorque trend display for measuring changes in viscosityMicroprocessor-controlled speed regulation, enables steady speed, also under loadRemovable WiCo (wiresless controller) for remote and safe use in a fume hoodScope of supply: Stand system, laboratory stirrer EUROSTAR 200 control, safety stop, reactor cover
Laboratory reactor LR-2.ST the Compact Power
Modularly configured laboratory reactors for the optimisation and reproduction of various chemical reactions, mixing and homogenisation processes on a lab scale. The system is particularly characterised by the agitator mounting, which allows for a safe transfer of the higher motor torque. ULTRA-TURRAX® dispersers, temperature sensors, flow breakers and other accessories can be attached to the open ports of the reactor cover.Suitable for vacuum operationSolvent- and temperature-resistant perfluoroelastomer (FFPM) seals come into contact with sampleInfinitely variable speedTorque trend display for measuring changes in viscosityMicroprocessor-controlled speed regulation, enables steady speed, also under loadRemovable WiCo (wiresless controller) for remote and safe use in a fume hoodScope of supply: Stand system, laboratory stirrer EUROSTAR 60 control, safety stop, reactor cover
Laboratory reactor LR-2.ST the High-Performer
Modularly configured laboratory reactors for the optimisation and reproduction of various chemical reactions, mixing and homogenisation processes on a lab scale. The system is particularly characterised by the agitator mounting, which allows for a safe transfer of the higher motor torque. ULTRA-TURRAX® dispersers, temperature sensors, flow breakers and other accessories can be attached to the open ports of the reactor cover.Suitable for vacuum operationSolvent- and temperature-resistant perfluoroelastomer (FFPM) seals come into contact with sampleInfinitely variable speedTorque trend display for measuring changes in viscosityMicroprocessor-controlled speed regulation, enables steady speed, also under loadRemovable WiCo (wiresless controller) for remote and safe use in a fume hoodScope of supply: Stand system, EUROSTAR 200 control P4 laboratory stirrer with higher torque, safety stop, reactor cover
Laboratory reactor LR-2.ST the Versatile
Modularly configured laboratory reactors for the optimisation and reproduction of various chemical reactions, mixing and homogenisation processes on a lab scale. The system is particularly characterised by the agitator mounting, which allows for a safe transfer of the higher motor torque. ULTRA-TURRAX® dispersers, temperature sensors, flow breakers and other accessories can be attached to the open ports of the reactor cover.Suitable for vacuum operationSolvent- and temperature-resistant perfluoroelastomer (FFPM) seals come into contact with sampleInfinitely variable speedTorque trend display for measuring changes in viscosityMicroprocessor-controlled speed regulation, enables steady speed, also under loadRemovable WiCo (wiresless controller) for remote and safe use in a fume hoodScope of supply: Stand system, laboratory stirrer EUROSTAR 100 control, safety stop, reactor cover