Round buckets for Swing-out rotor S-4-72

Round buckets for swing-out rotor S-4x1000

Round buckets for swing-out rotor S-4x400

Round buckets for swing-out rotor TX-150

Rubber adapter for high speed centrifuge tube

Rubber mats for rotors Eppendorf

Screw lids for swing-out rotors centrifuges Frontier™ 5000

Sealing cap assemblies Nalgene™, PP

PP screw cap with Tefzel® ETFE plug liner and viton O-ring. Leak-proof at recommended maximum speed and rcf for tubes. Suitable for working with aggressive chemicals. The 38mm assembly has a PP shoulder reinforcement ring to prevent collapsing of the 250ml bottles.Tefzel® is registered trademark of DuPont.

Sealing cap assemblies with silicone seal Nalgene™, PP

For Oak Ridge centrifuge test tubes made of PP, PC and polysulphone.

Sedimentation tube, PS

ClearConical bottomRZB max. 1000

Snap caps for centrifuge tubes, PE

Size 2.

Steel sleeves and adapters for fixed angle rotor F-35-48-17

Steel sleeves for fixed angle rotor F-35-30-17

Stoppers, PE for centrifuge tubes, PP

Superspeed centrifuge LYNX 4000

Superspeed centrifuge with GreenCool technology for high-performance separations in research and bioprocessing. GreenCool technology reduces environmental impact and ensures ozone-friendly operation. The device was developed for everyday laboratory use and can accommodate a wide range of tubes, bottles, and plates.Bright, easy-to-read touchscreen user interface that can be operated with glovesAuto-ID™ rotor identification: the rotor used is automatically recognized and the device parameters are adjusted to the rotor's standard settingsAuto-Lock™ enables quick and easy rotor change at the touch of a buttonAutomatic opening of the centrifuge lidRun time: up to 99 h 59 min 59 s, continuous operationWith pre-cooling functionAcceleration/deceleration profiles: 9 acceleration, 10 deceleration profiles, and brake-off optionFull GMP/GLP-compliant traceability with optional Thermo Scientific™ Centri-Log™ Plus Data Management softwareReal-time run monitoring and basic remote control via the Thermo Scientific™ Centri-Vue™ appSuperspeed centrifuge with GreenCool technology for high-performance separations in research and bioprocessing. GreenCool technology reduces environmental impact and ensures ozone-friendly operation. The device was developed for everyday laboratory use and can accommodate a wide range of tubes, bottles, and plates.Bright, easy-to-read touchscreen user interface that can be operated with glovesAuto-ID™ rotor identification: the rotor used is automatically recognized and the device parameters are adjusted to the rotor's standard settingsAuto-Lock™ enables quick and easy rotor change at the touch of a buttonAutomatic opening of the centrifuge lidRun time: up to 99 h 59 min 59 s, continuous operationWith pre-cooling functionAcceleration/deceleration profiles: 9 acceleration, 10 deceleration profiles, and brake-off optionFull GMP/GLP-compliant traceability with optional Thermo Scientific™ Centri-Log™ Plus Data Management softwareReal-time run monitoring and basic remote control via the Thermo Scientific™ Centri-Vue™ app

Superspeed centrifuge LYNX 6000, with Smart Vacuum System

Superspeed centrifuge with GreenCool technology for high-performance separations in research and bioprocessing. GreenCool technology reduces environmental impact and ensures ozone-friendly operation. The device was developed for everyday laboratory use and can accommodate a wide range of tubes, bottles, and plates.Bright, easy-to-read touchscreen user interface that can be operated with glovesAuto-ID™ rotor identification: the rotor used is automatically recognized and the device parameters are adjusted to the rotor's standard settingsAuto-Lock™ enables quick and easy rotor change at the touch of a buttonAutomatic opening of the centrifuge lidRun time: up to 99 h 59 min 59 s, continuous operationWith pre-cooling functionAcceleration/deceleration profiles: 9 acceleration, 10 deceleration profiles, and brake-off optionFull GMP/GLP-compliant traceability with optional Thermo Scientific™ Centri-Log™ Plus Data Management softwareReal-time run monitoring and basic remote control via the Thermo Scientific™ Centri-Vue™ appThe intelligent Smart Vacuum System removes up to 80 % of the air inside the centrifuge chamber. There are two options for when to use the vacuum: ‘high speed only’ or ‘smart energy optimised’.

Swing out rotor S-24-11-AT for microcentrifuges 5430/5430 R, incl. QuickLock® rotor lid

Swing out rotor S-4x1000 for centrifuge 5920 R, without buckets

Swing-out rotor A-2-DWP for centrifuges 5804/5804 R, 5810/5810 R

Incl. 2 bucketsVarious combinations of stacked plates can be centrifugedMax. loading height 89 mmSimultaneous processing of up to 192 samplesRotors and carriers are autoclavable (20 mins. at 121 °C)

Swing-out rotor A-2-DWP-AT for centrifuges 5810/5810 R, incl. buckets, caps and plate carriers

Incl. 2 buckets, 2 aerosol-tight caps and 2 plate carriersVarious combinations of stacked plates can be centrifugedMax. loading height 67 mm (89 mm without caps)Rotors and carriers are autoclavable (121 °C, 20 min.)

Swing-out rotor A-2-MTP for microcentrifuges 5430/5430 R, incl. rotor lid and 2 buckets

Swing-out rotor A-4-38 for centrifuges 5702/5702 R/5702 RH, without buckets

Swing-out rotor A-4-44 for centrifuges 5804/5804 R, 5810/5810 R, incl. 4 rectangular buckets for 2 x 50 ml

Flexible accessory adapter system means a wide range of containers can be spunRotors, buckets, caps and adapters are all autoclavable (20 mins. at 121 °C)

Swing-out rotor A-4-44 for centrifuges 5804/5804 R, 5810/5810 R, incl. 4 rectangular buckets of 100 ml

Flexible accessory adapter system means a wide range of containers can be spunRotors, buckets, caps and adapters are all autoclavable (20 mins. at 121 °C)