API-Centrifuge Tubes KIMAX®, graduated, borosilicate glass 3.3
Used to determine the bottom sediment and water in petroleum. Centrifuge tubes are graduated and calibrated to contain, with long taper. Scale, legend, and marking spot are printed in durable white ceramic enamel. API Standard 2542. Conforming to USP Type I and ASTM E438, Type I, Class A requirements.Division: 0.2 % / 0.5 % / 1 % / 100 %
ASTM centrifuge tube, cylindrical, with conical base, borosilicate glass 3.3
Cylindrical, with conical base. Graduations and labelling in high-contrast blue enamel. Maximum loading 700 xg rcf. Internal diam. neck approx. 17 mm.
ASTM centrifuge tube, pear-shaped with cylindrical base, borosilicate glass 3.3
Pear-shaped with cylindrical base. Former standard ASTM D 96. Capacity 100ml. Graduations and labelling in high-contrast blue enamel. Maximum loading 700xg rcf. Internal diam. neck approx. 17 mm.
ASTM centrifuge tubes, 6", short cone, oil, boro 3.3
Conical bottom centrifuge tube is used for testing of petroleum products. Scale and legend are durable white ceramic. Top is tooled to accept snap cap. Conforming to USP Type I and ASTM E438, Type I, Class A requirements.Graduations/ divisions:0 to 0.5 ml/ 0.05 ml0.5 to 2 ml/ 0.1 ml2 to 3 ml/ 0.2 ml3 to 5 ml/ 0.5 ml5 to 10 ml/ 1 ml10 to 25 ml/ 5 ml50 ml100 ml
ASTM centrifuge tubes, 8", oil and weathering, boro 3.3
Conical bottom centrifuge tube is used for testing of petroleum products. Scale and legend are durable white ceramic enamel. Top is tooled to accept snap cap. Conforming to USP Type I and ASTM E438, Type I, Class A requirements.Graduations/ divisions:0 to 1 ml/ 0.05 ml1 to 3 ml/ 0.1 ml3 to 6 ml/ 0.2 ml6 to 10 ml/ 0.5 ml10 to 100 ml/ 1 ml
ASTM centrifuge tubes, 8", oil, boro 3.3
Conical bottom centrifuge tube is used for testing of petroleum products. Scale and legend are durable white ceramic enamel. Top is tooled to accept snap cap. Conforming to USP Type I and ASTM E438, Type I, Class A requirements.Graduations/ divisions:0 to 0.5 ml/ 0.05 ml0.5 to 2 ml/ 0.1 ml2 to 3 ml/ 0.2 ml3 to 5 ml/ 0.5 ml5 to 10 ml/ 1 ml10 to 25 ml/ 5 ml50 to 100 ml/ 25 ml
ASTM centrifuge tubes, pear-shaped, with conical base, boro 3.3, 200 %
Tube used in the determination of bottom sediment and water in petroleum products. Calibrated to contain. Stem holds 1.5 ml. Scale and legend are durable white ceramic enamel. Conforming to USP Type I and ASTM E438, Type I, Class A requirements.Graduations/divisions:0 to 3 ml/ 0.1 ml3 to 5 ml/ 0.5 ml5 to 10 ml/ 1 ml10 to 100 ml/ 10 ml100 to 200 ml/ 20 ml
ASTM Centrifuge Tubes, pear-shaped, with conical base, borosilicate glass 3.3
Tube used in the determination of bottom sediment and water in petroleum products. Calibrated to contain. Stem holds 1.5 ml. Scale and legend are durable white ceramic enamel. Conforming to USP Type I and ASTM E438, Type I, Class A requirements.Graduations/divisions:0 to 1.5 ml/ 0.1 ml1.5 to 5 ml/ 0.5 ml5 to 10 ml/ 1 ml10 to 25 ml/ 5 ml50 ml100 ml
Centrifugal filter JetSpin® with 15 ml centrifuge tube
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 5 mlCentrifuge tube: 15 mlWhite capPack of 4 x 24
Centrifugal filter JetSpin® with 2 ml centrifuge tube
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 0.5 mlCentrifuge tube: 2 mlPack of 12 x 25
Centrifugal filter JetSpin® with 50 ml centrifuge tube, 24 per box
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 15 mlCentrifuge tube: 50 mlWhite capPack of 4 x 24
Centrifugal filter JetSpin® with 50 ml centrifuge tube, 8 per box
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 15 mlCentrifuge tube: 50 mlWhite capPack of 12 x 8
Centrifuge bottle Nalgene™, FEP
Transparent centrifuge bottle made of FEP with ETFE screw cap. Ideal for lipid and phenole extraction, digestions and precipitations at low speeds. Autoclavable.
Centrifuge bottles CellSafeTM
ConicalISO 13485 and ISO 9001 certifiedProduced in class 100000 clean roomsMade with USP Class VI standards medical-grade raw materialsGMP compliantMarked with batch numberTriple-bagged packagingSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free, non-cytotoxic
Centrifuge bottles Fiberlite™, PC
Bottles with a Fiberlite™ cap closure. Ideal for isolating cells, bacteria, and yeasts. The smooth inner walls of the bottles reduce shear forces during the separation of mammalian cell cultures. Non-cytotoxic. Autoclavable.
Centrifuge bottles Fiberlite™, PPCO
Bottles with a Fiberlite™ cap closure. Ideal for isolating cells, bacteria, and yeasts. The smooth inner walls of the bottles reduce shear forces during the separation of mammalian cell cultures. Non-cytotoxic. Autoclavable.
Centrifuge bottles Nalgene ™, PC, with conical bottom
For cell culture applications and protein biochemistry. PP sealing cap with silicone seal for added leak protection. The adapter is required for use.Crystal clearGraduated in 25 ml stepsAutoclavable
Centrifuge Bottles Nalgene™ with Sealing Cap , SuperSpeed
Designed to boost productivity and pellet recovery in super speed, large volume gross separation applications. Process one full Litre in each window-clear bottle at speeds up to 15810 x g. Graduated, wide-mouth bottle simplifies decanting, re-suspensions and pellet removal. Smooth inner walls are less likely to shear delicate cells. Ideal for bacterial, yeast and tissue isolations. Improve viral harvesting in vaccine production. Reduce shearing in mammalian culture separations. PC offers excellent clarity. Ergonomic design facilitates loading, recovery and storage of samples. Recommended operating temperature range is from 4 °C to 22 °C; storage to - 70 °C. Before autoclaving, just set closure on top of bottles without engaging the threads. For proper performance these bottles must be filled to at least 80 % of the total capacity.
Centrifuge bottles Nalgene™, BioBottle
Centrifuge bottle with 2L capacity.Separating large volumes up to 12LCentrifugation up to 7333xg, at temperatures from 4°C to 22°CBottle meets the requirements of USP VINon-cytotoxic, not hemolyticPPCO bottle, PP seal screw cap with silicone sealGraduated, total volume of 2380mlExcellent chemical resistanceBefore autoclaving, unscrew the cap and place it on the bottle neckBottles must always be at least 80% filledThe closure design features a two-piece plug and sealing cap to support aseptic handling techniques. Use of the two-piece closure system protects the bottle contents from contamination when the support bridge is applied and removed from the bottle. The plug includes a retaining ring to ensure and maintain the placement of the gasket during use. Dimensions (W x D x H): 111.3 x 175.3 x 209.3 mm.
Centrifuge bottles Nalgene™, PC
PC with PP screw cap. Crystal clear. Good mechanical strength. Autoclavable. Leak-proof even at low speeds. In order to ensure that the system is leak-proof even at high speeds and when centrifuging dangerous substances, the 250ml and 1000ml sizes must be used in conjunction with sealing screw cap sets.