Microcentrifuge 5427 R (IVD), with rotor FA-45-30-11
The cooled high-speed microcentrifuge is designed for molecular biology and research applications with high throughput.Cooled with natural refrigerant (R290)Soft touch closure for ergonomic operationStandard aerosol-tight rotors with QuickLock® lids for easy rotor lid opening and closingFastTemp function for fast pre-cooling of the centrifugeIntegrated condensation drain prevents water accumulationAutomatic rotor recognition and imbalance detection for maximum safetyWith short spin button and end-of run timerTimer 5 s to 9 h 59 minECO shut-off: compressor is switched off after 1, 2, 4, or 8 hours of inactivity to extend service life and reduce energy consumptionMicrocentrifuge with rotor FA-45-30-11 for 30 x 1.5/2 ml tubes.
Microcentrifuge 5427 R (IVD), with rotor FA-45-48-11
The cooled high-speed microcentrifuge is designed for molecular biology and research applications with high throughput.Cooled with natural refrigerant (R290)Soft touch closure for ergonomic operationStandard aerosol-tight rotors with QuickLock® lids for easy rotor lid opening and closingFastTemp function for fast pre-cooling of the centrifugeIntegrated condensation drain prevents water accumulationAutomatic rotor recognition and imbalance detection for maximum safetyWith short spin button and end-of run timerTimer 5 s to 9 h 59 minECO shut-off: compressor is switched off after 1, 2, 4, or 8 hours of inactivity to extend service life and reduce energy consumptionMicrocentrifuge with rotor FA-45-48-11 for 48 x 1.5/2 ml tubes.
Microcentrifuge 5427 R (IVD), without rotor
The cooled high-speed microcentrifuge is designed for molecular biology and research applications with high throughput.Cooled with natural refrigerant (R290)Soft touch closure for ergonomic operationStandard aerosol-tight rotors with QuickLock® lids for easy rotor lid opening and closingFastTemp function for fast pre-cooling of the centrifugeIntegrated condensation drain prevents water accumulationAutomatic rotor recognition and imbalance detection for maximum safetyWith short spin button and end-of run timerTimer 5 s to 9 h 59 minECO shut-off: compressor is switched off after 1, 2, 4, or 8 hours of inactivity to extend service life and reduce energy consumptionMicrocentrifuge without rotor. Please order rotors separately.
Microcentrifuge 5430 / 5430 R (General Lab Product) with rotor FA-45-30-11, with foil keypad
Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set timeThis centrifuges are General Lab Products for research purposes.
Microcentrifuge 5430 / 5430 R (General Lab Product) with rotor FA-45-30-11, with knobs
Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set timeThis centrifuges are General Lab Products for research purposes.
Microcentrifuge 5430 / 5430 R (General Lab Product) without rotor, with foil keypad
Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set timePlease order rotors separately.
Microcentrifuge 5430 / 5430 R (IVD) with rotor FA-45-30-11, with foil keypad
Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set timeMicrocentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set time
Microcentrifuge 5430 / 5430 R (IVD) with rotor FA-45-30-11, with knobs
Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set timeMicrocentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set time
Microcentrifuge 5430 / 5430 R (IVD) without rotor, with foil keypad
Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set timePlease order rotors separately.
Microcentrifuge 5430 / 5430 R (IVD) without rotor, with knobs
Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set timePlease order rotors separately.
Microcentrifuge 5430/5430 R (General Lab Product) without rotor, with knobs
Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).Microcentrifuge 5430Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon® tubes or 2 x MTP platesUnique 30 130xgAutomatic rotor recognitionStores up to 50 routine programsMenu guided operation in 4 different languagesAutomatic lid opening following application sequence (only 5430)Microcentrifuge 5430 R, additional features:Temp. range: -11°C to +40°C+4°C at max. speed with all rotorsContinues cooling after the centrifugation processFast Temp for achieving required temperature in shortest possible timeFast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set timePlease order rotors separately.This centrifuges are General Lab Products for research purposes.
Microcentrifuge Frontier™ FC5513, without rotor
Compact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuousCompact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuous
Microcentrifuge Frontier™ FC5513-K, with angle rotor for 24 x 1.5/2.0 ml tubes
Compact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuousCompact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuous
Microcentrifuge Frontier™ FC5513-L, with angle rotor for 18 x 1.5/2.0 ml tubes
Compact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuousCompact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuous
Microcentrifuge Frontier™ FC5513R, without rotor, cooled
Compact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuousCompact high-speed microcentrifuge with modern touch-wheel for comfortable operation and reduced wear. Ideal suited for general laboratory applications.Backlit, two-lined LCD displayPowerfull brushless induction motor10 acceleration and deceleration ratesMemory for up to 99 parametersLid locking systemImbalance sensorSmall footprintTimer: 10 s to 99 h 59 min 59 s, continuous
Microcentrifuge Prism™ / Prism™ R
Operation can be timed, continuous or momentary, using the "quick" button. Vibration free operation is ensured by an isolation system. In the event of a significant imbalance, operation of the centrifuge is automatically stopped. Deceleration at the end of a run is very quick, but will not disrupt samples. Supplied with a uniquely designed 24 x 1.5 ml/2.0 ml rotor that allows easy access to the tops of the sample tubes. Individual tube slots in the solid aluminum rotor support tubes along their length and contain the sample in the event of tube failure. The rotor is seated on a tapered shaft which facilitates easy removal for cleaning and autoclaving.Adapters for smaller tubes and PCR strips -please oder separately.
Microcentrifuge Spectrafuge™24D
The Spectrafuge™ 24D combines innovations such as a unique, easy access rotor, exclusive multi-flow air cooling system and high performance drive with a digital microprocessor that precisely regulates operation. Parameters are selected with two "smart" knobs and values are shown on large, easy to read, LED displays. Speed can be set and displayed in rpm or g-force. Runs can be set timed, continuous or momentary.The unique design of the 24-place rotor allows easy access to the tops of the tubes. An optional StripSpin™ adapter fits onto the rotor for spinning 0.2ml tubes and strips. A powerful, brushless motor quickly accelerates the rotor to set speed. Air enters the centrifuge through vents on the back of the housing and it is circulated in multiple directions to maximize cooling. The result is a cool running microcentrifuge that keeps samples close to ambient temperature, even during extended runs at maximum speed. For samples that require below ambient temperatures, the Spectrafuge 24D may be used in a cold room.
Microlitre centrifuges, Heraeus™ Fresco™ 17, cooled
The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less timeUser-friendly - fast and simple changes of rotors and tubes by a new user friendly DesignSafe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the userComfortable - simple fast attitude of the run parameters and a clearly arranged displayMultifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacityMicrocentrifuges incl. 24 x 1.5/2.0 ml rotor with ClickSeal biocontainment lid, up to 24 microcentrifuge tubes can be centrifuged and cooled with each run.
Microlitre centrifuges, Heraeus™ Fresco™ 21 with double-row rotor, cooled
The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less timeUser-friendly - fast and simple changes of rotors and tubes by a new user friendly DesignSafe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the userComfortable - simple fast attitude of the run parameters and a clearly arranged displayMultifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacityMicrocentrifuge incl. 24 x 1.5/2.0 ml rotor with ClickSeal biocontainment lid and double-row 18 x 0.5 and 18 x 2.0 ml rotor with screw cap
Microlitre centrifuges, Heraeus™ Fresco™ 21, cooled
The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less timeUser-friendly - fast and simple changes of rotors and tubes by a new user friendly DesignSafe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the userComfortable - simple fast attitude of the run parameters and a clearly arranged displayMultifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacityMicrocentrifuges incl. 24 x 1.5/2.0 ml rotor with ClickSeal biocontainment lid, up to 24 microcentrifuge tubes can be centrifuged and cooled with each run.
Microlitre centrifuges, Heraeus™ Pico™ 17
The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less timeUser-friendly - fast and simple changes of rotors and tubes by a new user friendly DesignSafe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the userComfortable - simple fast attitude of the run parameters and a clearly arranged displayMultifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacityMicrocentrifuges incl. 24 x 1.5/2.0 ml rotor with ClickSeal biocontainment lid.
Microlitre centrifuges, Heraeus™ Pico™ 17, incl. haematocrit rotor
The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less timeUser-friendly - fast and simple changes of rotors and tubes by a new user friendly DesignSafe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the userComfortable - simple fast attitude of the run parameters and a clearly arranged displayMultifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacityThe Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less timeUser-friendly - fast and simple changes of rotors and tubes by a new user friendly DesignSafe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the userComfortable - simple fast attitude of the run parameters and a clearly arranged displayMultifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacity
Microlitre centrifuges, Heraeus™ Pico™ 21
The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less timeUser-friendly - fast and simple changes of rotors and tubes by a new user friendly DesignSafe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the userComfortable - simple fast attitude of the run parameters and a clearly arranged displayMultifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacityMicrocentrifuges incl. 24 x 1.5/2.0 ml rotor with ClickSeal biocontainment lid.
Microlitre centrifuges, Heraeus™ Pico™ 21 with double-row rotor
The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less timeUser-friendly - fast and simple changes of rotors and tubes by a new user friendly DesignSafe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the userComfortable - simple fast attitude of the run parameters and a clearly arranged displayMultifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacityMicrocentrifuge incl. 24 x 1.5/2.0 ml rotor with ClickSeal biocontainment lid and double-row 18 x 0.5 and 18 x 2.0 ml rotor with screw cap