Glass Microfiber Filters with Binder, Grade GF 10
These glass microfiber filters are made from borosilicate glass and strengthened with an organic binder to provide high mechanical stability.Temperature resistance up to 180 °CMedium filtration speed
Glass Microfiber Filters with Binder, Grade GF 10, rolls
These glass microfiber filters are made from borosilicate glass and strengthened with an organic binder to provide high mechanical stability.Temperature resistance up to 180 °CMedium filtration speedCan be used as a roll filter in automated applications
Glass Microfiber with Binder, Grade GF 92
Glass microfibre filters are designed for prefiltration in order to protect against membrane fouling. Grade GF 92 is strengthened with an inorganic binder.Increased strengthTemperature resistant up to 500 °CMedium filtration speed
Glass microfibre filters, 1387/1
HydrophilicAir / Gas FiltrationLiquid FiltrationPrefiltrationNon-sterile
Glass microfibre filters, grade 934-AH
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.Circles. High retention at high flow rates. Widely used in water pollution monitoring techniques for suspended solids, and is specified in US Method 934-AH. Particle retention to 1.5µm.
Glass microfibre filters, grade 934-AH RTU, pre-treated, Solids
To be used for solid analysis as well as a wastewater filter for a wide range of water monitorings.Pre-washed, dried or ignited, cooled and weighed Glass Microfibre filters, which eliminate the pre-treating steps that are otherwise required by the US EPA Laboratory Standard Method 2540 parts C, D, and E. These glass microfiber filter papers also have fine particle retention of 1.5 µm at high flow rates to process heavy, turbid samples.Each ready-to-use filter is placed in an individually barcoded aluminum pan that notes the filter weight. Each box contains an additional box ID and barcode that can be used to download the weights of all 100 pans in that box.For suspended and dissolved solids. Pre-washed, dried, cooled, and weighed filters with certified mass loss between washing and drying steps of the lesser of less than 0.5 mg or 4 % in accordance with US EPA Lab Standard Method 2540 parts C and D.
Glass microfibre filters, grade 934-AH RTU, pre-treated, Solids, double weigh
To be used for solid analysis as well as a wastewater filter for a wide range of water monitorings.Pre-washed, dried or ignited, cooled and weighed Glass Microfibre filters, which eliminate the pre-treating steps that are otherwise required by the US EPA Laboratory Standard Method 2540 parts C, D, and E. These glass microfiber filter papers also have fine particle retention of 1.5 µm at high flow rates to process heavy, turbid samples.Each ready-to-use filter is placed in an individually barcoded aluminum pan that notes the filter weight. Each box contains an additional box ID and barcode that can be used to download the weights of all 100 pans in that box.For suspended and dissolved solids. Pre-washed, dried, cooled, and weighed filters with certified mass loss between washing and drying steps of the lesser of less than 0.5 mg or 4% in accordance with US EPA Lab Standard Method 2540 parts C and D.The drying, cooling and weighing steps are repeated twice for highest regulatory concerns.
Glass microfibre filters, grade 934-AH RTU, pre-treated, Volatiles
To be used for solid analysis as well as a wastewater filter for a wide range of water monitorings.Pre-washed, dried or ignited, cooled and weighed Glass Microfibre filters, which eliminate the pre-treating steps that are otherwise required by the US EPA Laboratory Standard Method 2540 parts C, D, and E. These glass microfiber filter papers also have fine particle retention of 1.5 µm at high flow rates to process heavy, turbid samples.Each ready-to-use filter is placed in an individually barcoded aluminum pan that notes the filter weight. Each box contains an additional box ID and barcode that can be used to download the weights of all 100 pans in that box.For volatile substances. Pre-weighed. Aligned to US EPA Laboratory Standard Method 2540 parts C, D, and E.
Glass microfibre filters, grade 934-AH RTU, pre-treated, Volatiles, ignited
To be used for solid analysis as well as a wastewater filter for a wide range of water monitorings.Pre-washed, dried or ignited, cooled and weighed Glass Microfibre filters, which eliminate the pre-treating steps that are otherwise required by the US EPA Laboratory Standard Method 2540 parts C, D, and E. These glass microfiber filter papers also have fine particle retention of 1.5 µm at high flow rates to process heavy, turbid samples.Each ready-to-use filter is placed in an individually barcoded aluminum pan that notes the filter weight. Each box contains an additional box ID and barcode that can be used to download the weights of all 100 pans in that box.For volatile substances. Aligned to US EPA Laboratory Standard Method 2540 parts C, D, and E. Pre-washed and pre-fired at 550 °C.
Glass microfibre filters, grade EPM 2000, sheets
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.For use in high volume air sampling apparatus. Particle retention to 2 µm.
Glass microfibre filters, grade GF 6, circles
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.To Herzberg.
Glass microfibre filters, grade GF 9, circles
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.Glass fibre filters are made of 100% borosilicate glass fibres with an inorganic binder. Temperature resistant up to 500 °C. Glass fibre filters are chemically resistant except against hydrofluoric acids and highly concentrated alkalis. Filtration speed to Herzberg.Application:Gas-/air-monitoringWater and waste water determination
Glass microfibre filters, grade GF/A, round filters
The general purpose high efficiency glass microfibre filter. Particle retention to 1.6 µm.
Glass microfibre filters, grade GF/A, sheets
The general purpose high efficiency glass microfibre filter. Particle retention to 1.6 µm.
Glass microfibre filters, grade GF/B, round filters
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.Three times thicker and with greater wet strength than GF/A. Particle retention to 1µm.
Glass microfibre filters, grade GF/B, sheets
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.Three times thicker and with greater wet strength than GF/A. Particle retention to 1µm.
Glass microfibre filters, grade GF/C / GF/C RTU, pre-treated
Grade GF/C is pre-rinsed and dried, grade GF/C RTU is additionally pre-treated with washing, drying, cooling (in a desiccator) and weighing steps, aligned to the requirements of EN 872. It is certified that these filters have weight loss of less than 0.017 mg/cm2 after preparation, which is required by the standard. Each grade GF/C RTU ready-to-use filter is placed in an individually barcoded aluminum pan that notes the filter weight. Each box contains an additional box ID and barcode that can be used to download the weights of all 100 pans in that box.Applications: For cell harvesting, liquid scintillation counting and binding assays, especially suitable for use in applications involving air filtration and for gravimetric analysis of volatile materials where ignition is involved.
Glass microfibre filters, grade GF/C, round filters
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.Extremely efficient filter made to retain fine particles and micro organisms. Particle retention to 1.2 µm.
Glass microfibre filters, grade GF/C, sheets
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.Extremely efficient filter made to retain fine particles and micro organisms. Particle retention to 1.2 µm.
Glass microfibre filters, grade GF/D
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.Thick filter made from less fibres and retaining around 3µm particles with a very high loading capacity. Extremely high speed. Particle retention to 2.7µm.
Glass microfibre filters, grade GF/F, round filters
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.This ultra-fine filter has a 98 % retention efficiency for particles as small as 0.7 µm in liquids. Particle retention to 0.7 µm.
Glass microfibre filters, grade GF/F, sheets
Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.This ultra-fine filter has a 98 % retention efficiency for particles as small as 0.7 µm in liquids. Particle retention to 0.7 µm.
Glass microfibre filters, MG 160 / MGA / MGG
Suitable for analytical and gravimetric analyses, as well as a pre-filter.HydrophilicAir / Gas FiltrationLiquid FiltrationNon-sterile