HPLC starter kits 6, Generation 2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Complete set for one HPLC system with up to 4 solvent reservoirsPrice advantage compared to ordering piece by pieceSuitable for all current HPLC systemsUse the supplied blind plugs to tighten connectors which are temporarily inactive or not in useScope of supply: 4 x SafetyCaps VI, 4 x air valve, 4 x change indicator, 24 x 1,6/ 24 x 2,3/ 24 x 3,2 mm PFA fittings, 20 x PFA blind plugs, 4 x labelling field
HPLC Supply and waste set
Scope of supply:4 x Safety Cap III, GL458 x air valve1 x Safety Waste Cap, GL451 x Exhaust filter L, V3.0, with splash guard and change indicator, service life 12 months1 x 5 l canister, HDPE4 x Laboratory bottle DURAN, GL45, 1000 ml, clear glass, with cap and pouring ring5 x PFA-fitting, 2.3 mm OD, violet5 x PFA fitting, 1.6 mm OD, green10 x PFA fitting, 3.2 mm OD, blue10 x PFA blind plug2 x hose connectors, straight, 6 - 8 mm ID1 x hose connectors, curved, 5.0 - 11.5mm ID1 x hose connectors, angled, 9.5 - 10 mm ID
HPLC Supply and waste set, electrostatic conductive
Scope of supply:4 x Safety cap III, GL458 x air valve1 x Safety waste cap, S60/61, electrostatic conductive1 x Exhaust filter L, V3.0, with splash guard and change indicator, service life 12 month1 x 5 l canister, HDPE-EL1 x Grounding cable, 2 x clamp, L = 1,5 m4 x Laboratory bottle DURAN, GL45, 1000 ml, clear glass, with cap and pouring ring5 x PFA-fitting, 2.3 mm OD, violet5 x PFA fitting, 1.6 mm OD, green10 x PFA fitting, 3.2 mm OD, blue10 x PFA blind plug2 x hose connector, straight, 6 - 8 mm ID1 x hose connector, curved, 5.0 - 11.5mm ID1 x hose connector, angled, 9.5 - 10 mm ID
HPLC Supply-Set II, type 4
This set with storage bottle and safety cap ensures a safe supply of solvent. The air valve blocks the escape of solvent vapours and ensures pressure equalisation during withdrawal.Scope of supply:Safety Cap II (GL28), air valve, change indicator, 1 x 100 ml laboratory bottle (brown glass), 2 x 1,5 m capillary 3,2 mm OD, 2 x PTFE suction filter, 2 x PFA fitting 1,6 mm OD, 2 x PFA fitting 2,3 mm OD, 2 x PFA fitting 3,2 mm OD, 1 x PFA blind plug, labelling field
HPLC syringe filter ProFill, PTFE
Suitable for organic solutions, aggressive acids and alkalis, as well as cryogenic liquids.HydrophobPolypropylene housingEasy identification of the membrane type by colour codingFast filtration thanks to a filter area of 3.7 cm2Luer-Lock input and Luer-Slip output
HPLC syringe filter ProFill, RC / PA
For aqueous and organic media. The RC membrane is not suitable for aggressive acids and alkalis.HydrophilePolypropylene housingEasy identification of the membrane type by colour codingFast filtration thanks to a filter area of 3.7 cm2Luer-Lock input and Luer-Slip output
HPLC Waste disposal set 1, V2.0
Waste disposal set consisting of:Safety Waste Cap GL 452 x PFA fitting 2.3/3.2 mm OD1 x PP tube connector 5,0 - 11,5 mm ID5 l canister, HDPEExhaust filter M, with splash guard and change indicator
HPLC Waste disposal set 2, V2.0
Waste disposal set consisting of:Safety Waste Cap GL 452 x PFA fitting 2,3/3.2 mm OD1 x PP tube conector 5,0 - 11,5 mm ID10 l canister, HDPEExhaust filter M, with splash guard and change indicator
HPLC Waste disposal set 3, V2.0
Waste disposal set consisting of:Safety Waste Cap S 502 x PFA fitting 2,3/3.2 mm OD1 x PP tube conector 5,0 - 11,5 mm ID5 l space saving canister, PPExhaust filter S, with splash guard and change indicator
HPLC Waste disposal set 4, V2.0, S 60/61
Waste disposal set consisting of:1 x SafetyWasteCap S 60/612 x PFA fitting 2,3/3.2 mm OD1 x PP tube conector 5,0 - 11,5 mm ID12 l canister, HDPEExhaust filter M, with splash guard and change indicator
HPLC Waste set 20
Scope of supply:1 x Safety Waste Cap, S60/613 x PFA fitting 2.3 mm OD3 x PFA fitting 2.3 mm OD3 x PFA fitting 3.2 mm OD3 x PP tube connector 5.0 - 11.5mm ID1 x GL14 connection for exhaust filter1 x canister, S60/61, 5 l, HDPE, UN-X1 x exhaust filter M, with splash guard and change indicator
HPTLC-Applicator, AS 30
Operates according to the spray-on technique. This principle permits motionless application of samples in lines or dots. Microcomputer controlled stepping motor and gas valve. Clearly arranged menu system enables the input of up to ten methods which can be stored using battery backup memory. Used in combination with an automatic sample transmitter the applicator controls the selection of sample containers, the transport of samples and rinsing processes via a serial interface.Dimensions (W x D x H) 480 x 380 x 280 mm.supply requirements 230 V 50/60 Hz, 50 A.
Hydrogen generator Precision Hydrogen SL
The smallest hydrogen generator from the Precision Hydrogen SL line, safely and continuously produces laboratory-grade hydrogen, with a purity of 99.9995 %, for GC-FID. This generator comes in a choice of manual water fill, auto water fill or with pressurised water fill.Minimal hydrogen storage in the systemVery low maintenance requirementsAuto-shutdown fail-safeSpecificationsPurity:99.9995 %Max. pressure:6.9 barRequired water quality:1.0 µS/cmGas connection:1 x 1/8" Swagelok compression fittingPermissible ambient temperature:10 ... 35 °CDimensions (W x D x H):160 x 355 x 250 mmWeigth:8,0 kgPower supply:100 ... 240 V, 50/60 HzWarranty:2 years
Hydrogen generators Precision Hydrogen
For the safe and continuous production of hydrogen with a purity of 99.9995% for GC and GC/MS.On-demand generation of high-purity hydrogen as detector gas for the FIDCompact, modular and stackable systemHydrogen production from deionised water using proton exchange membraneInternal leakage detection with automatic switch-off functionMinimal hydrogen storage in the systemFront LED touch screen with status displayCan be individually combined with PEAK zero nitrogen and zero air systemsSystems are available with different flow ratesVery low maintenance requirements3 years warranty on the hydrogen cellScope of supply: Hydrogen generator, 1 m Tygon® tubing, Deioniser column refill, barbed hose fitting, mains power cable for EU, UK and US, 2 x transit plugsSpecificationsPurity:99.9995 %Max. pressure:6.9 bar/100 psiRequired water quality:1.0 µS/cmGas connection:1/8" SwagelokPermissible ambient temperature:10 ... 35 °CDimensions (W x D x H):380 x 540 x 406 mmPower supply:110/230 V, 50/60 HzWarranty:3 years (cell) / 1 year (device)
Hydrogen generators Precision Hydrogen Trace
For the safe and continuous production of hydrogen with a purity of 99.99999% for trace analysis using GC, GC/MS and ICP.On-demand production of high purity hydrogen as carrier gas and detector gas for the FIDCompact, modular and stackable systemHydrogen production from deionized water using proton exchange membrane, pressure swing adsorption and carbon molecular sieveSystems are available with different flow rates, which can be combinedHighest purity due to regenerative PSA dryerAutomatic charging pump as standardInternal leakage detection with automatic switch-off functionMinimal hydrogen storage in the systemFront LED touch screen with status displayVery low maintenance requirements3 years warranty on the hydrogen cellScope of supply: Hydrogen generator, 1 m Tygon® tubing, Deioniser column refill, barbed hose fitting, mains power cable for EU, UK and US, 2 x transit plugsSpecificationsPurity:99.9999 %Max. pressure:6.9 bar / 100 psiRequired water quality:1.0 µS/cmGas connection:1/8" SwagelokPermissible ambient temperature:10 ... 35 °CDimensions (W x D x H):38.0 x 54.0 x 40.6 cmPower supply:110/230 V, 50/60 HzWarranty:3 years (cell). 1 year (device)
Inlet Liner for Agilent GC
Inlet Liner for Agilent 5890, 6850, 6890, 7890 und HP4890. Trajan's SGE inlet liners come as a complete, single packed unit. 5 or 25 packs, individually packed Complete with instrument appropriate o-rings and sealing rings Each pack is supplied with quality test results
Inlet Liner for Perkin-Elmer GC
Inlet Liner for Perkin-Elmer Autosystem and Clarus 500, 600. SGE's inlet liners come as a complete, single packed unit. 5 or 25 packs, individualy packed. Complete with instrument appropriate o-rings and sealing rings. Each pack supplied with quality test results.
Inlet Liner for Shimadzu GC
Liners come individually packed complete with instrument appropriate o-rings and sealing rings.Each pack is supplied with quality test results.Further liners und pack sizes available on request.
Inlet Liner for Thermo GC
Liners come individually packed complete with instrument appropriate o-rings and sealing rings. Each pack is supplied with quality test results. Further liners und pack sizes available on request.
Inlet liner SGE OptChem™, ConnecTite
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, ConnecTite, with bottom hole
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, ConnecTite, with top hole
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)