Empty columns CHROMABOND®, PP
Empty CHROMABOND® column (PP) for SPE, one PE-filter element is already inserted in the column.
EPR sample tubes, quartz glass
These EPR tubes are manufactured from upmarket quartz glass with only slightest amounts of paramagnetic trace elements. The tubes are delivered single packed and sealed in plastic foil.
Exhaust filter for barrels, PE
The exhaust filters, filled with activated carbon, prevent harmful solvent vapours from leakage.Lid with aeration openingsLabelling field to monitor service lifeXL for 60 - 100 l barrelsXXL for barrels from 100 l
Exhaust Filter, PP
Lid with integrated ventilation openings and service life indicator. The filling of activated carbon is protected by two porous membranes made of PE. This allows an unobstructed flow of exhaust air, solvents are adsorbed by the activated carbon and only filtered air streams out.
Exhaust filters for Waste SafetyCaps
The exhaust filter cleans the exhaust air of HPLC waste. The activated carbon in the exhaust filter is optimised for the absorption of organic solvent vapours. With timestrip sticker for timely replacement of the exhaust filter.
Exhaust filters V3.0, with change indicator
The exhaust air filters are equipped with three different activated carbon layers, which bind acids and alkalis and adsorb organic solvent vapours. Depending on the required capacity, filter with different service lifes are available.Filter media with a very high performance spectrum for acids and alkalisOptimised for binding buffer solutions and solvent vapoursWith splash guard1500 m²/g adsorption surface area
Exhaust filters V3.0, with change label
The exhaust air filters are equipped with three different activated carbon layers, which bind acids and alkalis and adsorb organic solvent vapours. Depending on the required capacity, filter with different service lifes are available.Filter media with a very high performance spectrum for acids and alkalisOptimised for binding buffer solutions and solvent vapoursWith splash guard1500 m²/g adsorption surface area
Extension tubing, Heidelberger type
No limited flow rate for all standard applicationsDEHP free
Extraction kits Copure® QuEChERS
Extraction and clean-up mixtures for sample preparation in the pesticide analysis of vegetable foodstuffs according to EN 15662 using GC/MS or LC/MS after acetonitrile extraction and purification using the dispersive SPE-QuEChERS method.The samples are first extracted with Mix A. Purification is done with one of the following mixtures:Mix B (Clean-up mixture for fruits and vegetables with low fat content, e.g. apples, strawberries)Mix C (Clean-up mixture for fruits and vegetables with high fat content, containing oil/wax, e.g. avocados)Mix D (Clean-up mixture for moderately chlorophyll/carotenoid-containing fruits and vegetables, e.g. carrots, salad)Mix E (Clean-up mixture for fruits and vegetables with high chlorophyll/carotenoid content, e.g. sweet peppers, spinach)If required, add ceramic homogenising beads for better mixing.Mix A contains a bag with the required amount of mixture and a 50 ml empty tubeMix B, C, D and E are pre-weighed into a 15 ml tube
Ferrules, mini, Graphite/ Vespel®
High quality ferrules made of 15 % Graphite / 85 % Vespel®.
Fine Dosage Syringes Injekt®-F, 2-piece
Made of polypropylene/polyethyleneGreen plunger, highly transparent barrel,High contrast black graduation, permanent marking, ideal readabilityDisplacement spike: Reduces residual volume and minimizes unnecessary loss of medicineSafe plunger backstop, easy aspiration up to maximum volumeSilicone oil-freeCentric Luer coneLatex-free/PVC-freeSingle sterile-packedType Solo without needle, Luer cone according to EN ISO 7886-1.Type Duo with bi-packed needle, Luer cone according to EN ISO 7886-1, EN ISO 7864 and DIN 13097.
Fine Dosage Syringes Omnifix®-F, 3-piece
Made of polypropylene/polystyrol, highly transparent barrelPermanent marking, ideal readabilitySafe plunger backstopEasy aspiration up to maximum volumePlunger stopper with double sealing ring for slow aspiration and injection: made of natural latex free synthetic materialMinimal residual volumeLatex-free/PVC-freeSingle sterile-packedType Solo without needle, Luer cone according to EN ISO 7886-1.Type Duo with bi-packed needle, Luer cone according to EN ISO 7886-1, EN ISO 7864 and DIN 13097.
Fine Dosage Syringes SOL-M™, 3-piece, with displacement spike, white syringe plunger
Barrel and plunger made of polypropylenePlunger stopper with double sealing ringHighly transparent barrel with black graduation, permanent markingSafe plunger backstop for easy aspiration up to maximum volumeLuer cone acc. to EN ISO 7886-1Latex-free/PVC-freeSingle sterile-packedBarrel and plunger made of polypropylenePlunger stopper with double sealing ringHighly transparent barrel with black graduation, permanent markingSafe plunger backstop for easy aspiration up to maximum volumeLuer cone acc. to EN ISO 7886-1Latex-free/PVC-freeSingle sterile-packed
Fine Dosage Syringes SOL-M™, 3-piece, without displacement spike
Barrel and plunger made of polypropylenePlunger stopper with double sealing ringHighly transparent barrel with black graduation, permanent markingSafe plunger backstop for easy aspiration up to maximum volumeLuer cone acc. to EN ISO 7886-1Latex-free/PVC-freeSingle sterile-packedBarrel and plunger made of polypropylenePlunger stopper with double sealing ringHighly transparent barrel with black graduation, permanent markingSafe plunger backstop for easy aspiration up to maximum volumeLuer cone acc. to EN ISO 7886-1Latex-free/PVC-freeSingle sterile-packed
Fittings for Eluent SafetyCaps / Waste SafetyCaps
For filling the capillary positions of SafetyCaps.
Fittings for SafetyCaps / SafetyWasteCaps
Fittings with integrated ferrule for SafetyCaps and SafetyWasteCaps.Use the blind plugs to tighten connectors which are temporarily inactive or not in use.
Fittings preparative, PTFE, for Caps
For fixing tubes in the tubing connectors (thread NPT 1/8“) of b.safe Caps.
Fittings, PE, PFAS Analytic
For fixing tubes in the capillary connections of b.safe Caps.
Fittings, PFA, for Caps and Waste Caps
For fixing tubes in capillary connections (thread UNF 1/4" 28G) of b.safe Caps and b.safe Waste Caps.
Fittings, PP, for PFAS analysis
For fixing tubing in the capillary connections. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.
Flanged Tubing, PTFE, PA
Flanged PTFE tubing with black tube end fittings UNF ¼" 28 G made of PP and washers made of PA. The tubing is ready for use. Temperature resistant from 0 to +100 °C, pressure resistant up to 30 bar, universal chemical resistance.
Flexible connecting system for DURAN® GL 45 flasks
For safe transfer of liquid media within a closed and sterile system (evaporation is reduced).Screw closure GL 45 with two, three or four ports GL 14 threadAutoclavableTemperature restistant up to max. 140 °CFlexible modular systemSterile pressure equalisation is possible through use of a membrane filterUnused ports can be provided with a blind cap