Silgur unmodified standard silica layers with concentrating zone
Support materials for TLC ready-to-use layersGlass plates: glass, ~ 1.3 mm thick, high requirements for weight, packaging and storage, ideal torsional strength, high temperature stability, susceptible to breakage, can not be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, suitability for aqueous detection reagents depends on the phasePOLYGRAM®: polyester, ~ 0.2 mm thick, low requirements for weight, packaging and storage, low torsional strength, max. 185 °C temperature stability, not susceptible to breakage, can be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, very suitable for aqueous detection reagentsALUGRAM®: aluminium, ~ 0.15 mm thick, low requirements for weight, packaging and storage, relatively high torsional strength, high temperature stability, not susceptible to breakage, can be cut with scissors, high resistance against solvents, low resistance against mineral acids and conc. ammonia, limited suitability for aqueous detection reagentsGlass platessilica 60, specific surface (BET) ~ 500m2/g, mean pore size 60Ä, specific pore volume 0.75ml/g, particle size 5.17µmkieselguhr zone for rapid sample application: because kieselguhr is completely inert towards a large number of compounds, the samples always from a narrow band at the interface of the two adsorbents, irrespective of shape, size or position of the spots in the concentrating zone. Separation then takes place inthe silica layer.available as glass plates with or without fluorescent indicator (UV254)
Simultan separating chamber
For all TLC plates up to 200 x 200 mm. Flat chamber floor with vertical grooves for up to 5 TLC plates.
Special atomiser, with rubber blowball
With rubber blowball for nebulising reagents. Can be connected to other compressed air supplies.
Spray box with fan
For spraying TLC plates with aggressive media. Housing made of acid-resistant PVC for plates up to 200 x 200 mm. Low-noise extraction fan supplies 400 m³/h. The exhaust tube leads upwards and can be connected to NW 100 extraction tubing. Reagent droplets are collected in a separate drip tray. Size (W x D x H) 620 x 610 x 580 mm.
Standard separating chamber
Flat chamber floor with glass ridge, for all TLC plates up to 200 mm x 200 mm.Filter paper for gas space saturation to optimize the separation results is available.Other separating chambers available on request.
Test tube atomiser, glass
Glass atomiser for nebulising small amounts of reagents. Atomiser can be inserted in a 12ml test tube with a ground joint and held in position with a spring clip.
Test tube sprayers, DURAN® - tubing
Made of DURAN® - tubing. Consists of a test tube with NS 14/23 or 19/26 joint neck, sprayer head, clamp and rubber bulb.
TLC micro-set A beginner's set for science education
Features separations with simple developing sovents; samples are coloured thus eliminating the need for visualisation. All equipment needed is contained in the kit.
TLC plate cutter
For scoring and cutting glass backed TLC plates. For cost-effectiveness in plate use, or in order to give individual plates different derivatives after separation. Supplied with cutting ring and template.
TLC plates LuxPlate® Silica gel 60 F254
Inorganic fluorescent indicators, green fluorescing.
TLC plates Silica gel 60 F254, with concentrating zone
Inorganic fluorescent indicators, green fluorescing.
TLC plates Silica gel 60 RP-18 F254S
Inorganic fluorescent indicators, blue fluorescing, acid-stable.
TLC plates Silica gel 60 RP-8 F254S
Inorganic fluorescent indicators, blue fluorescing, acid-stable.
TLC plates, Aluminum oxide 60 F254
Inorganic fluorescent indicators, green fluorescing.
TLC plates, Kieselguhr F254
Inorganic fluorescent indicators, green fluorescing.
TLC plates, Silica gel 60 F254
Inorganic fluorescent indicators, green fluorescing.
TLC sprayer
Versatile sprayer with gas cartridge for spraying reagents and other liquids. Spray pressure: constant 4.4 bar. Eco-friendly propellant mixture of dimethyl ether, propane and isobutane. Sufficient for approx. 500 ml of liquid.Easy to clean: unscrew cartridge, immerse uptake into vessel containing cleaning fluid and spray until the spray is free of residues.Propellants: dimethyl ether, isobutane, propane.