Set for continuous level control
For permanent level measurement. The signal box offers 4 freely configurable outputs for controlling external devices. The compact design and independent mains supply allow easy handling and installation even outside control cabinets.Automatic warning for 5 different levels freely selectableAccuracy of up to ± 0.5 mmProbe head: stainless steel 303/316LProbe tube: stainless steel 1.4571Probe length: 265 mmProbe tube Ø: 6 mmProtection class IP68Scope of supply: Signalbox UM-O-Ex with display unit, stainless steel sensor probe, cable with open ends, level sensor TORRIX Ex 6 B NT for Bypass without HART
Signal lamps for level control
Visual signal when the level is reachedWith magnetic holderCable length 3 m
Signalbox T5
LED's and acoustic alarm warn before the level of collection containers reaches the critical level. With mute / snooze function and interface for controlling external devices such as pumps or valves. For SCAT sensors and Safety Waste Caps with electronic level control.LED display5 sensor inputs and 6 potential-free outputsOperating temerature: 5 to 40 °C
Silica adsorbents for low pressure column chromatography
Standard silica 60, pore size ~ 60 Å; pore volume ~ 0.75ml/g; spec. surface BET ~ 500m²/g. highly porous, amorphous silicic acid in the form of hard, opalescent particles, prepared by precipitation of water glass with sulphuric acid. Silica FIA for the fluorescence indicator adsorption procedure for the determination of hydrocarbon groups in the testing of liquid fuels in accordance with DIN 51791 and ASTM D 1319-58T. The FIA method determines saturated hydrocarbons, olefins and aromatic hydrocarbons of a sample chromatographically by adsorption and desorption in a column filled with FIA silica, in the presence of a fluorescent dye mixture. Further silica adsorbentson request.
Spiral tubing, PFA, for b.safe Caps and b.safe Waste Caps
Spiral tubing with tubing ends (1x 300 mm, 1x 150 mm) and PFA fittings for tubing O. D. 3,2 mm.
Suction filters, PE
Filter cartridges made of porous PE with a bore to be put on capillary tubing.
Suction filters, PFA
Suction filter with PTFE membrane to be put on capillary tubing.
Switchbox II
Control unit for SCAT Built-in Signalbox or Signalbox T1/T5. For controlling the automatic switchover between two collection containers. This allows disposal to take place over the weekend, for example, without having to empty or change containers in the meantime. Aditionally, SwitchBox can be used in any kind of automation circuit (pump, valve, etc. control).
Table distributor b.safe, PP, with magnet
Central waste collection from several HPLC systems. Capillaries and tubes are connected without kinks using the fittings (thread UNF 1/4“) and tube connectors (thread NPT 1/8“) included in the scope of supply. The liquid solvent waste flows off directly and residue-free via the vertical hole inside the table distributor. Easy attachment to the worktable, either by magnet or silicone-free adhesive pad.Central waste collection from several HPLC systems. Capillaries and tubes are connected without kinks using the fittings (thread UNF 1/4“) and tube connectors (thread NPT 1/8“) included in the scope of supply. The liquid solvent waste flows off directly and residue-free via the vertical hole inside the table distributor. Easy attachment to the worktable, either by magnet or silicone-free adhesive pad.
Table distributor b.safe, PP, with silicone-free adhesive pad
Central waste collection from several HPLC systems. Capillaries and tubes are connected without kinks using the fittings (thread UNF 1/4“) and tube connectors (thread NPT 1/8“) included in the scope of supply. The liquid solvent waste flows off directly and residue-free via the vertical hole inside the table distributor. Easy attachment to the worktable, either by magnet or silicone-free adhesive pad.Central waste collection from several HPLC systems. Capillaries and tubes are connected without kinks using the fittings (thread UNF 1/4“) and tube connectors (thread NPT 1/8“) included in the scope of supply. The liquid solvent waste flows off directly and residue-free via the vertical hole inside the table distributor. Easy attachment to the worktable, either by magnet or silicone-free adhesive pad.
Thread adapter, G1/2" (m) on thread GL25 (m)
Connection straight, with O-ring from EPDM.
Thread adapters for Eluent SafetyCaps / Waste SafetyCaps
Thread adapters for using the SafetyCaps on vessels with a different thread.
Thread adapters for SafetyCaps / SafetyWasteCaps, female / male thread
Use SafetyCaps and SafetyWasteCaps also for bottles with GL40 or GL38 thread. Further adapters in different thread sizes are available on request.
Thread adapters with ground joint for b.safe Caps and Waste Caps
Adapter for transition from socket NS 29/32 to inner thread GL 45.
Thread adapters with ground joint for b.safe Caps and Waste Caps
Adapter for transition from core NS 29/32 to external thread GL 45.
Thread adapters, type A, for Caps and Waste Caps
The adapters for caps and waste caps have one male thread, one female thread and recessed grips for easy mounting.
Thread adapters, type B, for Caps and Waste Caps
The adapters for caps and waste caps have two male threads and recessed grips for easy mounting.
Thread adapters, type C, for Caps and Waste Caps
The adapters for caps and waste caps have two female threads and recessed grips for easy mounting.
Tube fittings for the tube connector Safety Waste Caps
Connectors for variable tube connector sizes on Safety Waste Caps.Further configurations available on request.
Tubing, PEEK, 100F
For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.Smooth inner surfaceGood chemical resistanceBio-inert and biocompatibleOperating temperature up to max. 100 °CPressure stable up to 483 bar (7000 psi, 48000 kPa), size dependentTube length 30.5 m
Tubing, PEEK, 10F
For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.Smooth inner surfaceGood chemical resistanceBio-inert and biocompatibleOperating temperature up to max. 100 °CPressure stable up to 483 bar (7000 psi, 48000 kPa), size dependentTube length 3 m
Tubing, PEEK, 50F
For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.Smooth inner surfaceGood chemical resistanceBio-inert and biocompatibleOperating temperature up to max. 100 °CPressure stable up to 483 bar (7000 psi, 48000 kPa), size dependentTube length 15 m
Tubing, PEEK, 5F
For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.Smooth inner surfaceGood chemical resistanceBio-inert and biocompatibleOperating temperature up to max. 100 °CPressure stable up to 483 bar (7000 psi, 48000 kPa), size dependentTube length 1.5 m