Temperature probe head for surface measurement for radio handle
For wireless temperature measurements. Attachable to radio handle.
Temperature Probe Lemo-Compact Pt100
Temperature probe with integral Lemo-connector. Particularly useful for measuring temperature in aggressive media (temperature range: -200 °C to +250 °C). The temperature element is located in a stainless steel core which is entirely sealed in a solid and seamless PTFE coating. This provides high chemical resistance and rigidity, however, the probe can be bent manually to thedesired shape. The tip of the probe is narrower (6mm dia.) for faster measurement response.Connector: 1 x Lemo, size 1, connector with 4 cores. The connector is situated directly at the end of the probe so that it can be used for further applications without removing any cables.
Temperature probe set for testo 915i
For temperature measurements in various applications. All probes are equipped with a thermocouple type K.The temperature probe set consists of one air probe, one immersion/penetration probe and one surface probe.Temperature rangeImmersion/penetration probe:-50 ... 400 °CAir probe:-50 ... 400 °CSurface probe:-50 ... 350 °CAccuracyImmersion/penetration probe:± 1.0 °C (-50 ... 100 °C), ± 1 % of measurement value (remaining range)Air probe:± 1.0 °C (-50 ... 100 °C), ± 1 % of measurement value (remaining range)Surface probe:± 1.0 °C + 1 % of measurement valueResolution:0.1 °CDimensions probe (L x Ø)Immersion/penetration probe:115 x 5 mmAir probe:99 x 4 mmSurface probe:136 x 5 mm
Temperature probe with stainless steel sleeve, thermocouple type K
Temperature probe with acid-resistant stainless steel sleeve for measurements in liquids, pastes and air. Suitable for measurements in the food industry.
Temperature probes for Knick pH meter and conductivity meter 703
Pt 1000 temperature probe for fast response temperature measurements. Accuracy class A acc. to DIN IEC 751. ZU 0156 with tilted tip.
Temperature probes, Pt100 for ama-digit ad 20 th
Class A. Stainless steel sheathed probe, approx. 105 x 3mm L x dia.With handle and approx. 1m cable.
Temperature sensor Pt 100, glass for PHYSICS 1000
Resistance thermometer, Pt 100, glass, acc. to DIN EN 60751 Class AA, 4-wire connectionWith ring marks on the glass shaft according to the immersion depths of standardised precision glass thermometersGlass shaft diam. 6 mm, narrowed at sensor to diam. 3 mmCompensation line, teflon/silicone insulated, fix connected through stainless steel transition casingCable outlet secured by means of heat-shrink tubingConnection via Physics plug
Temperature sensor Pt 100, stainless steel for PHYSICS 1000
Immersion resistance thermometer Pt 100, stainless steel, acc. to DIN EN 60751 Class AA, 4-wire connectionStainless steel compensation line 4 x 0.22 mm², teflon/silicone insulated, fix connected through stainless steel transition casing diam. 6 x 40 mmCable outlet secured by means of heat-shrink tubing
Temperature sensors for pH, ORP and ISE measurements
With built-in NTC 30 kOhm sensor and 2 x 4 mm banana plug.
Temperature transmitter for KlimaLogg Pro
Wireless transmitters to extend the professional thermo-hygrometer KlimaLogg Pro for external measurement of temperature. Up to 8 transmitters can be connected to and controlled with the KlimaLogg Pro. The transmitters can be placed onto a tabletop or fixed to the wall.With display for temperature. Eqipped with an additional external cable sensorRadio frequency: 868 MHzDimensions (W x D x H): 41 x 23 x 128 mmPower supply: 2 x AAA 1.5 V
Temperature transmitter with cable sensor
Transmitter with waterproof cable sensor for measuring and transmitting the temperature wirelessly. The display shows the measured temperature. The range is 100 m at a transmission frequency of 433 MHz.Adjustable for channel 1 to 3Can be used indoors or outdoorsFor hanging or standingBatteries are not included.
Temperature, humidity, pressure and CO2 logger LOG220E
Data logger for temperature, humidity and pressure recording with an external connection for a CO2 sensor or humidity, pressure and temperature sensor.Freely adjustable recording interval from 10 seconds to 24 hoursMin- and Max-values can be reset in the displayTime marking function ("Time Marker") during data recordingWith movement sensor for shock recordingMemory for approx. 60000 measurementsAutomatic output as PDF file, device can also be used without softwareNo driver installation neededStatus and alarm LEDs, with buzzerDisplay can be switched offBattery life > 4 years at > 15 min measuring intervalUSB interface for data transferSoftware available for download on the manufacturer's website (free of charge)Temperature, pressure humidity and CO2 sensors are available separately.Scope of supply: Data logger, wall mount, battery (1/2 AA 3.6 V), USB cover, screws and dowels
Temperature-humidity data logger EBI 12-TH100-EX
Robust data logger for precise measurement of relative humidity during process validation of sterilization processes with ethylene oxide.1 external PT1000 temperature sensor1 external capacitive humidity sensorCombined sensor replaceableReal-time data transmissionStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 50160 measured values per measurement channelStainless steel housingFactory calibration certificate: 0 °C and 60 °C; 32.8 %rH, 52.9 %rH, and 75.4 %rH at 25 °CApproved for use in EX areas: II1G Ex ia IIC T4 Ga
Temperature-humidity data logger Traceable®
Data logger with integrated sensors for monitoring temperature and relative humidity. The data logger can be connected to a Bluetooth®-enabled mobile device via the Bluetooth® interface. With the TraceableGO™ app (free of charge) or the TraceableLIVE™ cloud service (chargeable, registration required), measured values can be exported as a PDF, sent by e-mail, and stored on a mobile end device.Large LCD displayDisplay changes between temperature and humidity every 5 secondsSwitchable °C/°FLimit values and logging interval adjustable via TraceableGO™ or TraceableLIVE™ appStorage of up to 90 different alarm messagesMemory: 65536 measuring valuesNIST-traceable certificate includedScope of supply: Temperature-humidity data logger, batteries, NIST-traceable calibration certificate
Temperature-humidity logger LOG32TH
Data logger for monitoring and recording temperature and humidity during the storage and transportation of sensitive products. Measurement data can be transferred to a PC via the integrated USB interface, and evaluated and documented using the free LOG CONNECT software.Incl. calibration certificateMemory for 2 x 60000 data recordsUsable without software, with pre-programmed reading interval of 5 minutesFreely adjustable recording interval from 30 seconds to 24 hoursAutomatic output as PDF file (logger is recognized like USB memory stick)Battery life >2 years (with recording interval >5 minutes)Status and alarm LEDsIncl. wall mount and battery (1/2 AA, 3.6 V)Application profile:Quality monitoring in the laboratory, during production or in the warehouseAmbient conditions in production facilitiesMonitoring storage and transport conditions in accordance with HACCPAmbient conditions in power plantsMonitoring of refrigerators for pharmaceuticals
Temperature/Humidity data logger EBI 20-TH1
Applications:Reliable temperature and temperature/humidity recordingTransportStorage monitoringRefrigeration areas and coldroomsFeatures:Excellent price/performance ratioVisual AlarmMax./min. values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedScope of supply: Temperature/Humidity logger
Temperature/Humidity data logger EBI 20-TH1-Set
Applications:Reliable temperature and temperature/humidity recordingTransportStorage monitoringRefrigeration areas and coldroomsFeatures:Excellent price/performance ratioVisual AlarmMax./min. values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedScope of supply: Temperature/Humidity logger, evaluation software, interface
Temperature/Humidity data logger LOG 210
PDF-data logger with displayMemory size: 100.000 measurementsUsable without software (default settings) (5-minute-interval, without alarm settings)Automatic PDF creationMovement sensor for shock recording e.g.: door or windows closingFree adjustable recording interval: 10 seconds to 24 hoursMax-Min-Display memory (resettable)Time marking functions for measuring resultsBattery lifetime approx. 4 years (recording interval >15 minutes)Status- and Alarm-LEDsIncludes wall mountBattery: 1/2 AA, 3.6 VFree software LogConnect, for configuring (alarms, interval, changing display settings) or LogGraph2 for comfortable graphical and tabular display of measured values, incl. drag and zoom. Software is available as download.
Temperature/Humidity data logger LOG110
Large display for actual value, battery status display, easy to use software.Perfect designed instrument for transportation or storage after HACCP.Quality surveillance in laboratories, at the production or in the storageAmbient conditions in manufacturing facilitiesAmbient conditions in power plantsMonitoring of fridges for the pharma industryMemory for 60000 data setsPlease order Software with USB-Cabel separately (9.726 413).
Temperature/humidity data logger testo 184 H1
The Temperature/humidity data logger testo 184 H1 monitors every step of the cold chain during the transport of sensitive goods. Direct control of whether the configured limit values have been adhered to at the destination. The measurement results can be read out when connected to a PC via the automatic PDF report. Easy operation due to the stored files for configuration, acceptance test certificate and operating instructions.Clear alarm indicationEasy configuration without software installationConvenient readout due to automatic PDF reportMemory: 60000 measured valuesConformity to GxP, 21 CFR Part 11, HACCP and EN 12830