Support Labo-Clip
Stable support for clamping test tubes, thermometers, pH electrodes and other laboratory instruments onto laboratory containers (e.g. beakers). Extensive chemical resistance, with strong flexible foam rubber plate perforated with 5 apertures of varying diameters. Metal components are corrosion-resistant. Applicable from -40 °C to 120 °C.
Surface probe, thermocouple Type K
Surface probe with thermocouple strip and coiled cable. Accuracy class 1. According to EN 60584-1.
Surface probe, thermocouple Type K, with 4 mm contact area
Surface probe with contact area, handle, and sensor cable. Accuracy class 2. According to EN 60584-1.
Surface probe, thermocouple Type K, with thermocouple spring
Surface probe with thermocouple spring, handle, and sensor cable. Accuracy class 1. According to EN 60584-1.
Surface probe, thermocouple, Lemo connection
Probe with silicone cable and Lemo connection for measuring the surface temperature.
Surface probe, thermocouple, SMP connection
Probe with silicone cable and SMP connection for measuring the surface temperature.
TC-Temperature probes for testo measuring devices, TC plug type T
Temperature probes with TC plug type T.
TC-Temperature probes for testo measuring instruments, TC plug type K
Temperature probes with TC plug type K.
Technical pH buffer solutions
Colour coded. Tested and ISO 17025 Certified at 25 °C. Uncertainty of measurement ±0.02 pH. Temperature dependence data is printed on the label as are lot numbers and expiry dates. These pH buffer solutions are suitable for use where very accurate measurements are required and are supplied with a detailed Certificate of Analysis which outlines traceability to N.I.S.T (the N.I.S.T SRM(s) Lot No. is stated on the certificate). This item has a 12 to 36 month shelf life from date of manufacture depending on pH value.
Technical pH buffer solutions in twin-neck dispensing bottles
Colour coded. Tested and ISO 17025 Certified at 25 °C. Uncertainty of measurement ±0.02 pH. Temperature dependence data is printed on the label as are lot numbers and expiry dates. These pH buffer solutions are suitable for use where very accurate measurements are required and are supplied with a detailed Certificate of Analysis which outlines traceability to N.I.S.T (the N.I.S.T SRM(s) Lot No. is stated on the certificate). This item has a 12 to 36 month shelf life from date of manufacture depending on pH value.
Technical buffer solutions
Identified by colour-coded labels. Tolerance ±0.03 pH.
Technical pH buffer solutions, certified reference material (CRM)
Certified reference material according to ISO 17034. The pH buffer solutions are colour-coded and the uncertainty of measurement of ±0.02 pH was tested at 25 °C. Supplied with detailed certification report which includes traceability to NIST. Lot numbers and expiry dates are printed on the label.
Temperature and humidity logger LOG210 TC
Data logger with motion sensor, integrated USB interface for automatic PDF output and wall mount. For measurement and recording of temperature and humidity and 2 connections for external type K thermocouples.Freely adjustable recording interval from 10 seconds to 24 hoursMin- and Max-values can be reset in the displayTime marking function ("Time Marker") during data recordingWith movement sensor for shock recordingMemory for approx. 60000 measurementsAutomatic output as PDF file, device can also be used without softwareNo driver installation neededStatus and alarm LEDs, with buzzerDisplay can be switched offBattery life > 4 years at > 15 min measuring interval (free of charge)USB interface for data transferSoftware available for download on the manufacturer's websiteTemperature and humidity sensors are available separately.Scope of supply: Data logger, 2 thermocouples type K (1 m length), wall mount, battery (1/2 AA, 3.6 V), USB cover, screws and dowels
Temperature and humidity sensor with with plug-in cable
Small, precise sensor for measuring temperature and relative humidity in display cabinets. The cable can be easily by replaced with a longer cable. No effect on the air exchange rate in the display cabinet thanks to the supplied wall bushing with O-ring seal.Accuracy humidity:±1.0 %RH hysteresis±1.0 %RH/year drift±2.0 %RH at 25.0 °C and 20 to 80 %RH±3.0 %RH at 25.0 °C and <20 %RH and >80 %RH
Temperature brake for temperature probes
For homogeneous temperature measurement in refrigerators and freezers. The external temperature probe of the thermometer is fixed precisely in the holes and measures the temperature of the reference body. Temperature fluctuations due to frequent, brief opening of the door and the associated false alarms are thus avoided.Made of aluminium3 holes: suitable for temperature probes with Ø 3.5 mm, 4.2 mm and 5.0 mmDimensions (W x D x H): 60 x 25 x 25 mm
Temperature calibration set
Temperature calibration set consists of measuring sensor and display device.
Temperature chamber ETD 300 for rotational viscometers VisQC
Temperature control from +25 to +300 °CFull control via the ViscoQC displayFor measurement of bitumen, hot melts, polymers, waxesComplies with ASTM D4402, D3236, AASHTO T316, EN 13302 and more
Temperature data logger EBI 12 starter kit SK 6200
Temperature data logger EBI 12-T273 for food control during pasteurization in cans or jars, as well as for monitoring and temperature mapping. With the IF 200 interface and the Winlog.pro software included in the starter kit, the temperature data logger can be programmed, and the recorded data read out.1 measuring channelHigh-quality stainless steel housingAxial design with rigid PT1000 probe (Ø 3 mm)Needle length 100 mmM5 thread for attachment to the probeMemory for up to 27840 measured valuesFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °CScope of supply: Temperature data logger, software Winlog.pro, interface IF 200
Temperature data logger EBI 12-T100
Robust temperature data logger for regular independent routine checks in medicine, during production, and for quality assurance.Wireless temperature measurementData logger can be sterilisedWith internal PT1000 temperature sensorStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 100320 measured valuesStainless steel housingFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °C
Temperature data logger EBI 12-T210
Robust temperature data logger for checking sterilisation as part of quality assurance in production, as well as for mapping temperatures in warehouses, cooling units, and incubators. Also ideal for pasteurisation control, especially in small containers.1 measuring channelWireless temperature measurementRadial design with external, rigid PT1000 temperature sensor (pointed)Storage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 27840 measured valuesStainless steel housingFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °C
Temperature data logger EBI 12-T220
Data logger for temperature measurement in steam sterilisers, washer-disinfectors, and endoscope washers during process validation.1 measuring channelWireless temperature measurementRadial design with external, bendable PT1000 temperature sensorReal-time data transmissionFast response timeStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 100320 measured valuesStainless steel housingFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °C
Temperature data logger EBI 12-T237
Temperature data logger for food control during pasteurization in cans or jars, as well as for monitoring and temperature mapping.1 measuring channelHigh-quality stainless steel housingAxial design with rigid PT1000 probe (Ø 3 mm)Needle length 100 mmM5 thread for attachment to the probeMemory for up to 27840 measured valuesFactory calibration certificate: -20 °C, 0 °C, 60 °C and 134 °CScope of supply: Temperature data logger
Temperature data logger EBI 12-T441
Data logger for temperature measurement in steam sterilisers, washer-disinfectors, and endoscope washers during process validation.2 measuring channelsWireless temperature measurement2 axially arranged external, bendable PT1000 temperature sensorsReal-time data transmissionStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 50160 measured values per measurement channelStainless steel housingFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °C
Temperature data logger EBI 12-T690
Data logger for temperature measurement during process validation in the steam sterilizer and for recording of empty chamber profiles.4 measuring channelsData logger can be sterilised4 radially arranged external, highly flexible PT1000 temperature sensorsReal-time data transmissionFast response timeStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 25080 measured values per measurement channelStainless steel housingFactory calibration certificate: 0 °C, 60 °C, and 134 °C