Infrared thermometer testo 830-T1
Infrared thermometer for non-contact measurement of surface temperatures.Fast data acquisition of two measurements per secondAdjustable emissivityTwo adjustable alarm limit valuesVisual and audible alarm when limit values are exceededHold function and display of min./max. valuesClear, illuminated display1-point laser marking10:1 opticsAccuracy ±1.5 °C or 1.5 % of measured value (0.1 to 400 °C)Scope of supply: Infrared thermometer, batteries (9 V block battery), calibration certificate
Infrared thermometer testo 830-T2
Infrared thermometer for non-contact measurement of surface temperatures.Fast data acquisition of two measurements per secondAdjustable emissivityTwo adjustable alarm limit valuesVisual and audible alarm when limit values are exceededHold function and display of min./max. valuesClear, illuminated display2-point laser marking12:1 opticsAccuracy ±1.5 °C or 1.5 % of measured value (0.1 to 400 °C)External probe connection for TE Type K thermocouple temperature probeScope of supply: Infrared thermometer, batteries (9 V block battery), calibration certificate
Infrared thermometer testo 830-T2 Set
Infrared thermometer for non-contact measurement of surface temperatures.Fast data acquisition of two measurements per secondAdjustable emissivityTwo adjustable alarm limit valuesVisual and audible alarm when limit values are exceededHold function and display of min./max. valuesClear, illuminated display2-point laser marking12:1 opticsAccuracy ±1.5 °C or 1.5 % of measured value (0.1 to 400 °C)External probe connection for TE Type K thermocouple temperature probeScope of supply: Infrared thermometer, cross-band surface probe, protective leather case, batteries (9 V block battery), calibration certificate
Infrared thermometer testo 830-T4
Infrared thermometer for non-contact measurement of surface temperatures.Fast data acquisition of two measurements per secondAdjustable emissivityTwo adjustable alarm limit valuesVisual and audible alarm when limit values are exceededHold function and display of min./max. valuesClear, illuminated display2-point laser marking30:1 opticsExternal probe connection for TE Type K thermocouple temperature probeScope of supply: Infrared thermometer, batteries (9 V block battery), calibration certificate
Infrared thermometer testo 830-T4 Set
Infrared thermometer for non-contact measurement of surface temperatures.Fast data acquisition of two measurements per secondAdjustable emissivityTwo adjustable alarm limit valuesVisual and audible alarm when limit values are exceededHold function and display of min./max. valuesClear, illuminated display2-point laser marking30:1 opticsExternal probe connection for TE Type K thermocouple temperature probeScope of supply: Infrared thermometer, cross-band surface probe, protective leather case, batteries (9 V block battery), calibration certificate
Infrared thermometer testo 831
Infrared thermometer for non-contact measurement of surface temperature. The 2-point laser measuring spot marking enables precise temperature measurement even for small products, and larger distances.Easy one-hand operation and quick scan via index finger triggerHold functionTwo adjustable alarm limitsAccuracy ±1.5 °C or ±1.5 % of mv (-20 to 210 °C), ±2 °C or ±2 % of mv (remaining range)Optics: 30:1Spectral range: 8 to 14 µmEmissivity adjustable from 0.1 to 1.0HACCP certifiedScope of supply: Infrared thermometer, leather protective case incl. belt clip, calibration protocol, battery
Infrared thermometer TFI 260
Non-contact measurement of the surface temperature with infrared. Ideal for fast and secure measurements of moving or energized parts, as well as foodstuffs. The measuring area is perfectly marked with the circular laser pointer. With batteries and factory calibration certificate.Display with backlighting12:1 opticsFixed emissivity setting of 0.95
Infrared thermometer TFI 54
Infrared thermometer with dust and splash-proof housing for non-contact, rapid measurement of surface temperature. With batteries and factory calibration certificate.Single laser pointer12:1 opticsAdjustable emissivityRubberised housing
Infrared thermometer with penetration probe testo 104-IR
WaterproofNon-contact measurement and core temperature measurement in one thermometerHigh-quality, robust folding jointPrecise 2-point laser with 10:1 opticsEmissivity freely selectableHACCP-compliant, acc. to EN 13485
Infrared thermometer, DualTemp Pro, with penetration probe
For simple, rapid, non-contact, temperature measurement.Dual displayMeasuring spot:distance ratio 2.5:1Max./ Min., Hold functionsAuto-off after 15 secs.Belt-clip includedAccessories: certificate of calibration & pilot drill for taking measurements from frozen items
Infrared thermometers, ProScan 520
Highest precision due to special glass lens (spot size up to a distance of 14 cm: 1.3 cm constant), measuring time: 0.3 secondsAccuracy (IR): ±1 °C or 1 % (from 20 to 760 °C), the higher value countsRelation measuring distance/spot size 40:1Display of current, highest and lowest temperature, hold function, alarm at freely adjustable temperature values (upper/ lower limit)With laser sighting, for contact-free measuring of surface temperatureAdjustable visual and acoustic alarmIncl. thermocouple sensor type K, USB interface and Windows software
Infrared-thermometers
Favourable measuring instrument for determination of surface temperatures.Resolution: 0,1 °C (-10 to 110 °C)Battery: CR2032 3 V
Insertion probe, thermocouple Type K
Insertion probe for measuring in solid, liquid, and pasty media. With handle and sensor cable. Accuracy class 1. According to EN 60584-1.
Insertion probe, thermocouple Type K, heat-resistant
Insertion probe with handle and sensor cable made of PTFE. The entire probe is heat-resistant up to 250 °C. Accuracy class 1. According to EN 60584-1.
Interval timer
Mechanical interval timer with alarm signal and count-down.Running time max. 120 minutesWhite plastic casingFor lying, standing and hanging
Interval timer with alarm
Benchtop mechanical timer. Suitable for standing, hanging and in addition on the back of two magnets, which allows the fitting of metal parts. Casing and rotary setting knob are white, the dial is black. Running time max. 60mins. Metal movement.
Ion selective combination electrodes perfectION™
With integrated reference electrode. Easy cleaning of the diaphragm between measurements with Click & Clear™ (except Na electrode): by pressing the electrode head, the electrolyte solution flows through the diaphragm. The electrolyte can be easily emptied and refilled. Optimum contact between sample and electrolyte solution is always guaranteed.Scope of supply: Sensor with permanently connected 1.2 m cable with BNC connection, 60 ml reference electrolyte, operating instructionsScope of supply Na-electrode: Sensor with S7 plug head, diaphragm made of glass with higher sensitivity to sodium, 25 ml reference electrolyte, operating instructions
Ion selective, gas-sensitive electrodes
Modular half cell with exchangeable diaphragm and S-7 plug head for determining the concentration of individual ions in aqueous solutions. Easy to use and require comparatively low expenditure on apparatus thereby offering advantages over wet chemistry and instrument analysis methods. Ion selective electrodes must be used in conjunction with a suitable reference electrode (InLab® Reference, cat no. 9.041 590 or InLab® Reference Plus, cat no. 9.041 591).
Ioniser AD-1683A
The ioniser can be used as a stand-alone unit with all balances from any manufacturer, making it a useful addition to any weighing environment. The positive and negative ions generated by the ioniser neutralise static charges almost immediately. The tungsten electrode needles maintain the ambient ion balance. The integrated IR sensor allows touchless ON/OFF control, making the removal of static charges even more efficient.Adjustable discharge time in either timer mode (3 s or 10 s) or manual mode (any time)No risk of contamination as the ioniser uses the direct current method and does not require a fan to discharge the ionsExternal IR switch optionally available
Ioniser for balances
Goods to be weighed which are non-conductive, such as plastic, china or glass, often carry electrostatic charge. The electromagnetic field can cause the weighing result to be distorted by up to a gramm. Therefore, when weighing in milligrammes or even smaller increments, the ioniser is used for neutralising the electrostatic charge.
Ionizer ION-100A
The ionizer can be used to neutralise electrostatic charges between the sample container and the balance, which can lead to inaccuracies in the measurement. The fan-free technology prevents fine samples from being blown away.