Coating thickness gauges, digital, TB-FN
For measuring of non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, inch (mil)Auto-Power-OffBattery operationScope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
Coating thickness gauges, digital, TF
For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, base plate, calibration foils, carrying case
Coating thickness gauges, digital, TG
For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
Combi infrared and insertion thermometer TLC 750i-V2
Handy infrared thermometer for non-contact measurement of surface temperature or core temperature with the foldable insertion probe. Ideal for time-saving, precise temperature measurements during goods receipt, as well as during storage and transport of goods and foodstuffs.Practical pocket size for daily useSimplified operationBacklit display allows reading in dark environmentRotating display makes it easy to read the measured valueDouble laser pointerOptics 8:1HACCP and DIN EN 13485 compliant, incl. calibration certificateWaterproof housing (IP 65)
Combination Infrared and Penetration Thermometer TLC 750i
Handy, waterproof infrared thermometer with large measurement range for non-contact measurement of the surface temperature and secure core temperature measurement with the folding penetration probe. For time-saving, precise temperature measurements at incoming goods, production and storage of diverse goods and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.Display with backlight for reading in dark environmentsDisplay can be upside down for reading from both sidesDouble laser pointer
Combination probe temperature/humidity for PDF data logger LOG40
Combination probe for measuring temperature and relative humidity.
Combination probe temperature/humidity/pressure for PDF data logger LOG40
Combination probe for measuring temperature, relative humidity, and barometric pressure.
Combined density and refractometry index standards
For density and refractometer calibration in one step. Bottles can directly be used in SC1 and SC30 automation units. Coded with barcodes for fully automatic verification procedure in METTLER-TOLEDO LiQC systems.
Combined redox electrodes
DMi140-SC: Combined platinum ring redox electrode. For titrations with a change of the pH value, e.g. oxidation with potassium permanganate, copper determination with iodine, back titration with thiosulfate. With S12 screw cap and ARGENTHAL™ reference system. Plug & Play functionality.DMi141-SC: Combined silver ring electrode for argentometric titrations, determination of halides, sulfides and mercaptanes in aqueous media. Also suitable for determination of salt and silver content. With S12 screw cap and ARGENTHAL™ reference system. Plug & Play functionality.DM143-SC: Double pin platinum electrode for electrochemical titrations, e.g. water determination acc. to Karl Fischer, bromine number determination and sulfur dioxide determination in aqueous media. With S7 screw cap and ARGENTHAL™ reference system.DMi144-SC: Combined platinum ring redox electrode. For titrations with a change of the pH value, especially designed for COD determination with the Rondo 20 COD rack. With Plug & Play functionality and ARGENTHAL™ reference system.DMi145-SC: Combined silver ring electrode for argentometric titrations, determination of halides, sulfides and mercaptanes in aqueous media. Also suitable for determination of salt and silver content. With Plug & Play functionality and ARGENTHAL™ reference system.DMi148-SC: Combined silver ring electrode for argentometric titrations without a change of the pH value. For determination of halides, cyanides, sulfides and mercaptanes in mineral oil and bioethanol.
Combined redox electrodes InLab®
Redox combination electrodes for measuring the oxidation/reduction potential in aqueous solutions. The signal is generated on the surface of the indicator electrode by an electron exchange with the oxidation/reduction system of the measured medium. Without temperature sensor. With Safelock™ end ring for easy refilling of the reference electrolyte and complete sealing in closed position. For use with a wide variety of measuring instruments.InLab® Redox: For general purpose. With platinum ring indicator electrodeInLab® Redox Flow: For emulsions, wastewater analysis and general purpose. With movable ground joint junction and platinum ring indicator electrodeInLab® Redox L: For large samples. With platinum ring indicator electrodeInLab® Redox Au: Combined redox electrode with gold ring indicator electrodeInLab® Redox Ag: Combined redox electrode with silver ring indicator electrodeInLab® Redox Micro: For small samples. With platinum ring indicator electrodePlease order connection cable separately.
Compact Balances EK-i series
EK-610i and EK-6100i can be verifiedcompact, low profile designmultiple Weighing Units: g,%, pcs, oz, ozt, tl, lb, GN, dwt, ct, molarge, backlit, wide-angle LCD readoutcontrol zero, mode selection and data output with RS232C porttriple range weighing for EW-i seriesconformity to GLP with I.D. and serial number outputauto power offsealed key panel protection against dust and spillsfull digital calibrationstandard comparator function-Hi/OK/LO annunciatorACAI counting function for highly accurate countingoverload protectionsecurity ring secures balance to bench to protect against theftWinCT data software CD-ROM included
Compact balance MA, with external adjustment
Portable, compact laboratory balance with integrated applications for daily routine tasks.Large, bright LCD hybrid touchscreenUSB-A and RS232 interface for easy data transferPlug & Play: automatic recognition of peripheral devicesMains connection or battery operation (8 x AA batteries)Portable, compact laboratory balance with integrated applications for daily routine tasks.Large, bright LCD hybrid touchscreenUSB-A and RS232 interface for easy data transferPlug & Play: automatic recognition of peripheral devicesMains connection or battery operation (8 x AA batteries)
Compact balance MA, with internal adjustment
Portable, compact laboratory balance with integrated applications for daily routine tasks.Large, bright LCD hybrid touchscreenUSB-A and RS232 interface for easy data transferPlug & Play: automatic recognition of peripheral devicesMains connection or battery operation (8 x AA batteries)Portable, compact laboratory balance with integrated applications for daily routine tasks.Large, bright LCD hybrid touchscreenUSB-A and RS232 interface for easy data transferPlug & Play: automatic recognition of peripheral devicesMains connection or battery operation (8 x AA batteries)
Compact balances Compass™ CR
Economic balance series for basic weighing. With a large weighing platform for a variety of mobile weighing applications in laboratories, industry and education.Battery life up to 300 hours in continuous operationBacklit LCD display, digit height 15 mmEasy and convenient 2-button operationABS housing and weighing platform with non-slip feetScope of supply: Balance incl. 3 AA batteries included Please order power adapter separately.
Compact balances Compass™ CX
Balance series with high battery life for daily weighing tasks. With a large weighing platform for a variety of mobile weighing applications in laboratories, industry and education.Battery life up to 1000 hours in continuous operationBacklit LCD display, digit height 18 mmEasy and convenient 2-button operationABS housing and stainless steel weighing platform with non-slip feetScope of supply: Balance incl. 3 AA batteries included Please order power adapter separately.
Compact Balances EK-AEP, Ex-protected
Compact, lightweight balance for precise weighing in potentially explosive atmospheres (zones 0, 1 and 2). Equipped with an optical data output for transferring measuring results to device in a distant, safe area.Easy-to-read backlit LCD display, digit size 16 mmHygienic and chemically resistant stainless steel (SUS304) weighing panComparator function for faster and more accurate filling, packing, sorting, etcAdjustable response characteristics depending on the degree of drafts and vibrations at the locationMultiple weighing units: g, oz, lb, ozt, ct, mom, dwt, gr, N, in addition to pcs (counting mode), % (percent mode), SG (specific gravity)Battery operation (4 x AA alkaline batteries 1.5 V, approx. 250 hours)Auto power OFF functionPlease order fibre optic cable and optical communication interface AD-1611 separately.
Compact Balances HL-i series
High weighing resolution of 1/2000Large LCD readoutCalibration functionTare functionAuto Power OFF functionMultiple weighing unitsBatteries included
Precision balance PCD
High-resolution precision balance with seperate display. Ideal when working in the glove bag or fume cupboard.Freely programmable weighing unit, e.g. display direct in special units such as length of thread g/m, paper weight g/m², or similarPRE-TARE functionLevel indicator and levelling feetLarge backlit LCD display, digit height 21 mmOptional battery operation (9 V block not included), operating time up to 12 hAUTO-OFF functionScope of supply: Balance inkl. protective working cover and universal mains adapter, PCD 250-3 and PCD 300-3 additionally with draught shield
Precision balance Type PFB
Easy use: All primary functions have their own key on the keypadCompact size, practical for small spacesCapacity display: A bar lights up to show how much of the weighing range is still availableDraft shield standard for models with weighing plate sizes diam. 80 mm and 120 mmProtective working cover
Conductivity calibration solutions
Disposable bags for effective calibration. Traceability according to NIST.