Electrolyte and cleaning solutions for electrodes

Supplied in packs of 250ml.

Electrolyte solution

Electrolyte solution to refill the liquid filled reference system of pH electrodes.

Electrolyte solution for electrodes

Electrolyte solution for InLab® 605

Potassium hydroxide solution.

Electrolyte solution for ISE half cells, DX series

Electrolyte solution for reference electrodes

LiCI solution 1 mol/l in ethanol for measurements in non-aqueous media.

Electrolyte solution FRISCOLYT-B®

Electrolyte solution FRISCOLYT-B® for measurements at low temperature and for media with organic compounds.

Electrolyte solutions Eutech™, KCl

Electrolyte solutions for pH electrodes

Electrolytes and cleaning solutions

Electrolytes are used as refill solutions for liquid filled electrodes as well as a storage solution for all types of pH electrodes. With the pepsin cleaning solution, you can remove protein precipitation from the diaphragm of electrodes with liquid electrolyte.

Exchange tool set

Tool set consisting of two parts to replace the diaphragms.

Fluoride electrodes

For quick and easy measurement of fluoride ions in aqueous solutions. When using the half cell electrodes 9409BN and 9409SC, a separately available reference electrode is needed.

Glass electrode AT 201 for pH meter PHT 810

High performance ammonia ISE Electrode

For high performance applications. Rapid results within one minute at concentrations from 1 ppm. Very good linear response.Scope of supply: Waterproof BNC connector, 1 m cable, 20 loose membranes, preassembled outer body and membrane cap, 2 x 60 ml bottles of electrode filling solution, spout cap, tweezers

Holding clip HC 325

Holding clip for SenTix® electrodes and temperature sensor TFK 325.

IDS ORP electrode SenTix® Rx-T 900

Digital ORP electrode with plastic shaft and gel filling for mobile field measurements.

IDS ORP electrodes SenTix® ORP-T 900

Universel ORP electrodes with platinum disc for laboratory applications.

IDS pH electrode SenTix® 940-P

Low maintanance pH electrode with plastic shaft and gel electrolyte, with built-in temperature sensor NTC 30 kOhm. With plug head, please order AS/IDS-x cable combination or IDS WLM-S radio module separately (radio range 100 m).

IDS pH electrode SenTix® 945

Low maintanance pH electrode with glass shaft and gel electrolyte, with built-in temperature sensor NTC 30 kOhm.

IDS pH electrodes SensoLyt® 900-P

With polymer electrolyte and glass shaft, built-in temperature sensor, pressure resistant up to 10 bars. Electrode with waterproof plug head for connection to a MPP IDS or AS/IDS-x.

IDS pH electrodes SenTix® 940

Low maintanance pH electrodes with plastic shaft and gel electrolyte, with built-in temperature sensor NTC 30 kOhm. With waterproof digital connector, cable length 1.5 m, SenTix® 940-3 with 3 m cable.

IDS pH electrodes SenTix® 950

Precision pH electrodes with plastic shaft and liquid electrolyte KCl 3 mol/l Ag+ free, with built-in temperature sensor NTC 30 kOhm. Cable length 1.5 m, SenTix® 950-P wireless-ready.

IDS pH electrodes SenTix® 980

Precision pH electrodes with glass shaft and liquid electrolyte KCl 3 mol/l Ag+ free, with built-in temperature sensor NTC 30 kOhm, cable length 1.5 m.

IDS pH electrodes SenTix® 980-P

Precision pH combination electrode with glass shaft and liquid electrolyte KCl 3 mol/l Ag+ free, with built-in temperature sensor NTC 30 kOhm, QSC-capable, memory for 10 calibrations, saved serial number. With plug head.Please order AS/IDS type cables or wireless IDS WLM-S module separately.