Support Labo-Clip
Stable support for clamping test tubes, thermometers, pH electrodes and other laboratory instruments onto laboratory containers (e.g. beakers). Extensive chemical resistance, with strong flexible foam rubber plate perforated with 5 apertures of varying diameters. Metal components are corrosion-resistant. Applicable from -40 °C to 120 °C.
Surface probe, thermocouple Type K
Surface probe with thermocouple strip and coiled cable. Accuracy class 1. According to EN 60584-1.
Surface probe, thermocouple Type K, with 4 mm contact area
Surface probe with contact area, handle, and sensor cable. Accuracy class 2. According to EN 60584-1.
Surface probe, thermocouple Type K, with thermocouple spring
Surface probe with thermocouple spring, handle, and sensor cable. Accuracy class 1. According to EN 60584-1.
Surface probe, thermocouple, Lemo connection
Probe with silicone cable and Lemo connection for measuring the surface temperature.
Surface probe, thermocouple, SMP connection
Probe with silicone cable and SMP connection for measuring the surface temperature.
TC-Temperature probes for testo measuring devices, TC plug type T
Temperature probes with TC plug type T.
TC-Temperature probes for testo measuring instruments, TC plug type K
Temperature probes with TC plug type K.
Temperature and humidity logger LOG210 TC
Data logger with motion sensor, integrated USB interface for automatic PDF output and wall mount. For measurement and recording of temperature and humidity and 2 connections for external type K thermocouples.Freely adjustable recording interval from 10 seconds to 24 hoursMin- and Max-values can be reset in the displayTime marking function ("Time Marker") during data recordingWith movement sensor for shock recordingMemory for approx. 60000 measurementsAutomatic output as PDF file, device can also be used without softwareNo driver installation neededStatus and alarm LEDs, with buzzerDisplay can be switched offBattery life > 4 years at > 15 min measuring interval (free of charge)USB interface for data transferSoftware available for download on the manufacturer's websiteTemperature and humidity sensors are available separately.Scope of supply: Data logger, 2 thermocouples type K (1 m length), wall mount, battery (1/2 AA, 3.6 V), USB cover, screws and dowels
Temperature and humidity sensor with with plug-in cable
Small, precise sensor for measuring temperature and relative humidity in display cabinets. The cable can be easily by replaced with a longer cable. No effect on the air exchange rate in the display cabinet thanks to the supplied wall bushing with O-ring seal.Accuracy humidity:±1.0 %RH hysteresis±1.0 %RH/year drift±2.0 %RH at 25.0 °C and 20 to 80 %RH±3.0 %RH at 25.0 °C and <20 %RH and >80 %RH
Temperature brake for temperature probes
For homogeneous temperature measurement in refrigerators and freezers. The external temperature probe of the thermometer is fixed precisely in the holes and measures the temperature of the reference body. Temperature fluctuations due to frequent, brief opening of the door and the associated false alarms are thus avoided.Made of aluminium3 holes: suitable for temperature probes with Ø 3.5 mm, 4.2 mm and 5.0 mmDimensions (W x D x H): 60 x 25 x 25 mm
Temperature data logger EBI 12 starter kit SK 6200
Temperature data logger EBI 12-T273 for food control during pasteurization in cans or jars, as well as for monitoring and temperature mapping. With the IF 200 interface and the Winlog.pro software included in the starter kit, the temperature data logger can be programmed, and the recorded data read out.1 measuring channelHigh-quality stainless steel housingAxial design with rigid PT1000 probe (Ø 3 mm)Needle length 100 mmM5 thread for attachment to the probeMemory for up to 27840 measured valuesFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °CScope of supply: Temperature data logger, software Winlog.pro, interface IF 200
Temperature data logger EBI 12-T100
Robust temperature data logger for regular independent routine checks in medicine, during production, and for quality assurance.Wireless temperature measurementData logger can be sterilisedWith internal PT1000 temperature sensorStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 100320 measured valuesStainless steel housingFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °C
Temperature data logger EBI 12-T210
Robust temperature data logger for checking sterilisation as part of quality assurance in production, as well as for mapping temperatures in warehouses, cooling units, and incubators. Also ideal for pasteurisation control, especially in small containers.1 measuring channelWireless temperature measurementRadial design with external, rigid PT1000 temperature sensor (pointed)Storage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 27840 measured valuesStainless steel housingFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °C
Temperature data logger EBI 12-T220
Data logger for temperature measurement in steam sterilisers, washer-disinfectors, and endoscope washers during process validation.1 measuring channelWireless temperature measurementRadial design with external, bendable PT1000 temperature sensorReal-time data transmissionFast response timeStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 100320 measured valuesStainless steel housingFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °C
Temperature data logger EBI 12-T237
Temperature data logger for food control during pasteurization in cans or jars, as well as for monitoring and temperature mapping.1 measuring channelHigh-quality stainless steel housingAxial design with rigid PT1000 probe (Ø 3 mm)Needle length 100 mmM5 thread for attachment to the probeMemory for up to 27840 measured valuesFactory calibration certificate: -20 °C, 0 °C, 60 °C and 134 °CScope of supply: Temperature data logger
Temperature data logger EBI 12-T441
Data logger for temperature measurement in steam sterilisers, washer-disinfectors, and endoscope washers during process validation.2 measuring channelsWireless temperature measurement2 axially arranged external, bendable PT1000 temperature sensorsReal-time data transmissionStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 50160 measured values per measurement channelStainless steel housingFactory calibration certificate: -20 °C, 0 °C, 60 °C, and 134 °C
Temperature data logger EBI 12-T690
Data logger for temperature measurement during process validation in the steam sterilizer and for recording of empty chamber profiles.4 measuring channelsData logger can be sterilised4 radially arranged external, highly flexible PT1000 temperature sensorsReal-time data transmissionFast response timeStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 25080 measured values per measurement channelStainless steel housingFactory calibration certificate: 0 °C, 60 °C, and 134 °C
Temperature data logger LOG100/LOG100 Cryo
Large display for actual value, battery status display, easy to use software. Perfect designed instrument for monitring transportation or storage after HACCP.Quality surveillance in laboratories, at the production or in the storageAmbient conditions in manufacturing facilities Ambient conditions in power plantsMonitoring of fridges for the pharma industryMemory for 60000 data setsWaterproof IP 65Please order Software with USB-Cabel separately (9.726 413).
Temperature data logger LOG200
Data logger for monitoring and recording the temperature during storage and transportation of sensitive products. Measurement data can be transferred to a PC via the integrated USB interface. Free LogConnect software for configuration (alarms, interval, changing display settings) or LogGraph2 for convenient graphical and tabular display of measured values, including drag and zoom. Software is available for download.Incl. calibration certificateMemory for 150000 readingsUsable without software (pre-programmed 15 minute reading interval)Automatic output as PDF fileRecording interval adjustable (10 seconds to 24 hours)Max-Min values in the display (resettable)Time marking function during recording (time marker)Motion sensor for shock recording e.g. change of location or opening of windows and doorsBattery life approx. 4 years (with recording interval >15 minutes)Incl. wall mountStatus and alarm LEDs with acoustic signal (buzzer)HACCP compliant in accordance with EN 12830IP65 waterproofScope of supply: Temperature data logger, battery (1/2 AA, 3.6 V), wall mount
Temperature data logger LOG200 TC
Data logger for monitoring and recording the temperature during storage and transportation of sensitive products. Measurement data can be transferred to a PC via the integrated USB interface. With 2 external connections for thermocouple Type K sensors.Incl. calibration certificateMemory for 60000 readingsUsable without software (pre-programmed 5 minute reading interval)Automatic output as PDF fileMin and max values can be reset in the displayMarking function (‘Time Marker’) during data recordingRecording interval adjustable (10 seconds to 24 hours)Motion sensor documents vibrations, e.g. change of location or opening of windows and doorsAlarm function when limit values are exceeded or not reachedStatus and alarm LEDsSoftware available as a free download on the manufacturer's websiteScope of supply: Temperature data logger, 2 thermocouple Type K probes, wall mount, battery (1/2 AA, 3.6 V), USB cover, screws and dowels
Temperature data logger TC 2012
Data logger with 12 measuring channels for seamless documentation of multi-channel temperature measurements. Suitable for use with thermocouple temperature probes of Types K, J, T, E, R, and S. The SD memory card can be used to save the measurement data with date and time, and transmit it to a PC for analysis. The data logger can be powered by batteries or by a separately available mains adapter.Large display with green backlightMeasuring interval adjustable from 1 to 3600 sec, or manual recording on demandAutomatic or manual power-off possibleData hold to freeze the measured valueRobust and compact housingScope of supply: Temperature data logger, 2 temperature probes thermocouple Type K, SD memory card, hard carrying case, manual
Temperature data logger testo 175 T3
Compact data logger for long-term monitoring of temperature in rooms. For quick programming of the data logger and easy data analysis, the ComSoft Basic software is available free of charge via download.Large, easy-to-read displayAutomatic storage of measured data in case of empty battery or battery changeData transfer of measured data via SD card or USB cableLarge memory capacity (1000000 measured values)Display of limit value violationsTemperature data logger with 2 connections for external temperature sensors, e.g. immersion sensor, surface or air sensor.Scope of supply: Temperature data logger with 2 connections for external temperature sensors type T and type K, wall bracket, lock, batteries, calibration protocol
Temperature data logger testo 176 T1
Robust, HACCP conform temperature data logger mith metal body and internal PT100 temperature sensor. Data is stored even if the battery is changed or empty.High protection class IP68Storage for up to 2 million valuesApproved for use in the food industry acc. to EN 12830Battery life up to 8 yearsWith Mini USB connection and SD card slotSoftware for reading out the values is available as free download on the manufacturer's websiteScope of supply: Temperature data logger with internal PT100 sensor, turn holder, lock, battery (TL-5903), calibration protocol