Temperature data logger Traceable® Memory-Loc™, with 1 vaccine bottle probe
Data logger for monitoring the temperature in refrigerators and freezers. Transmission of the data recorded in CSV format via a USB connection.Display of max./min. temperature and current temperatureSmart-Alarm™ with visual and audible alarm in case of limit violationsLarge measurement data memorySwitchable °C / °FAdjustable logging intervalStorage of up to 10 different alarm messagesNIST-traceable calibration certificate included21 CFR Part 11 compliantTo protect the temperature sensor from rapid temperature changes, it is located in a glycol-filled vaccine bottle.Scope of supply: Temperature data logger with 1 vaccine bottle probe, 3 m cable, stand, hook-and-loop strips, magnetic strips, batteries, NIST-traceable calibration certificateTemperature range:-50 ... 70 °CAccuracy:±0.25 °CResolution:0.01 °CLogging interval:1 min ... 24 hMemory:1051200 measured valuesPower supply:2 x AAA
Temperature data logger Traceable® Memory-Loc™, with 2 vaccine bottle probes
Data logger for monitoring the temperature in refrigerators and freezers. Transmission of the data recorded in CSV format via a USB connection.Display of max./min. temperature and current temperatureSmart-Alarm™ with visual and audible alarm in case of limit violationsLarge measurement data memorySwitchable °C / °FAdjustable logging intervalStorage of up to 10 different alarm messagesNIST-traceable calibration certificate included21 CFR Part 11 compliantThe temperature sensors are each located in a glycol-filled vaccine bottle to be protected against rapid temperature changes.Scope of supply: Temperature data logger with 2 vaccine bottle probes, 3 m cable, stand, hook-and-loop strips, magnetic strips, batteries, NIST-traceable calibration certificateTemperature range:-50 ... 70 °CAccuracy:±0.25 °CResolution:0.01 °CLogging interval:1 min ... 24 hMemory:1051200 measured valuesPower supply:2 x AAA
Temperature data logger Traceable®, with 1 bottle probe
Data logger for temperature monitoring. The data logger can be connected to a Bluetooth®-enabled mobile device via the Bluetooth® interface. With the TraceableGO™ app (free of charge) or the TraceableLIVE™ cloud service (chargeable, registration required), measured values can be exported as a PDF, sent by e-mail, and stored on a mobile end device.Large LCD displaySwitchable °C / °FLimit values and logging interval adjustable via TraceableGO™ or TraceableLIVE™ appStorage of up to 90 different alarm messagesNIST-traceable calibration certificate includedTo protect the temperature sensor from rapid temperature changes, it is located in a glycol-filled bottle.Scope of supply: Temperature data logger with 1 bottle probe, batteries, NIST-traceable calibration certificateTemperature range:-50 ... 70 °CAccuracy:±0.3 °CResolution:0.1 °CLogging interval:1 min ... 12 hMemory:65536 measured valuesPower supply:2 x AAA
Temperature data logger Traceable®, with 1 bullet probe
Data logger for temperature monitoring. The data logger can be connected to a Bluetooth®-enabled mobile device via the Bluetooth® interface. With the TraceableGO™ app (free of charge) or the TraceableLIVE™ cloud service (chargeable, registration required), measured values can be exported as a PDF, sent by e-mail, and stored on a mobile end device.Large LCD displaySwitchable °C / °FLimit values and logging interval adjustable via TraceableGO™ or TraceableLIVE™ appStorage of up to 90 different alarm messagesNIST-traceable calibration certificate includedTemperature data logger with external bullet probe for temperature monitoring of air and liquids.Scope of supply: Temperature data logger with 1 bullet probe, batteries, NIST-traceable calibration certificateTemperature range:-50 ... 70 °CAccuracy:±0.3 °CResolution:0.1 °CLogging interval:1 min ... 12 hMemory:65536 measured valuesDimensions probe (L x Ø):20 x 4.8 mmPower supply:2 x AAA
Temperature data logger Traceable®, with 1 insertion probe
Data logger for temperature monitoring. The data logger can be connected to a Bluetooth®-enabled mobile device via the Bluetooth® interface. With the TraceableGO™ app (free of charge) or the TraceableLIVE™ cloud service (chargeable, registration required), measured values can be exported as a PDF, sent by e-mail, and stored on a mobile end device.Large LCD displaySwitchable °C / °FLimit values and logging interval adjustable via TraceableGO™ or TraceableLIVE™ appStorage of up to 90 different alarm messagesNIST-traceable calibration certificate includedTemperature data logger with one insertion probe (platinum RTD sensor) made of stainless steel.Scope of supply: Temperature data logger with 1 insertion probe, batteries, NIST-traceable calibration certificateTemperature range:-90 ... 100 °CAccuracy:±0.2 °CResolution:0.1 °CLogging interval:1 min ... 12 hMemory:65536 measured valuesDimensions probe (L x Ø):159 x 3.2 mmPower supply:2 x AAA
Temperature dual adapter TPX 310 for PDF data logger EBI 310 TX
Adapter for EBI 310 TX to measure two temperatures parallel. Please order 2 sensors separatly.
Temperature logger LOG200 TC
Data logger with motion sensor, integrated USB interface for automatic PDF output, and wall mount. For recording of temperature and 2 connections for external type K thermocouples.Incl. calibration certificateFreely adjustable recording interval from 10 seconds to 24 hoursMin- and Max-values can be reset in the displayTime marking function ("Time Marker") during data recordingWith motion sensor for shock recordingMemory for approx. 60000 readingsAutomatic output as PDF file, device can also be used without softwareNo driver installation neededStatus and alarm LEDs, with buzzerDisplay can be switched offBattery life > 4 years at > 15 min recording intervalUSB interface for data transferSoftware available for download on the manufacturer's website (free of charge)Temperature probes are available separately.Scope of supply: Data logger, 2 thermocouples type K with 1 m length, wall mount, battery (1/2 AA, 3.6 V), USB cover, screws and dowels
Temperature logger LOG200E
Data logger with motion sensor and integrated USB interface for automatic PDF output. For internal temperature measurement and recording. With connection for an external Pt 100 temperature sensor.Incl. calibration certificateFreely adjustable recording interval from 10 seconds to 24 hoursMin- and Max-values can be reset in the displayTime marking function ("Time Marker") during data recordingWith motion sensor for shock recordingMemory for 100000 readingsAutomatic output as PDF file, device can also be used without softwareNo driver installation neededStatus and alarm LEDs, with buzzerDisplay can be switched offBattery life 4 years at > 15 min recording intervalSoftware available for download on the manufacturer's website (free of charge)Temperature probes are available as accessory.Scope of supply: Data logger, wall mount, battery (1/2 AA, 3.6 V), USB cover, screws and dowels
Temperature logger testo 175 T1
Compact data logger for long-term monitoring of temperature in rooms. For quick programming of the data logger and easy data analysis, the ComSoft Basic software is available free of charge via download.Large, easy-to-read displayAutomatic storage of measured data in case of empty battery or battery changeData transfer of measured data via SD card or USB cableLarge memory capacity (1000000 measured values)Display of limit value violationsWith internal NTC temperature probe.Tested acc. to EN 12830 for use in the food sector.Scope of supply: Temperature logger, wall bracket, lock, batteries, calibration protocol
Temperature logger testo 175 T1 Set
Compact data logger for long-term monitoring of temperature in rooms. For quick programming of the data logger and easy data analysis, the ComSoft Basic software is available free of charge via download.Large, easy-to-read displayAutomatic storage of measured data in case of empty battery or battery changeData transfer of measured data via SD card or USB cableLarge memory capacity (1000000 measured values)Display of limit value violationsWith internal NTC temperature probe.Tested acc. to EN 12830 for use in the food sector.Scope of supply: 3 x temperature logger, wall bracket, lock, batteries, calibration protocol, 1 x USB cable, 1 x SD memory card
Temperature logger testo 175 T2
Compact data logger for long-term monitoring of temperature in rooms. For quick programming of the data logger and easy data analysis, the ComSoft Basic software is available free of charge via download.Large, easy-to-read displayAutomatic storage of measured data in case of empty battery or battery changeData transfer of measured data via SD card or USB cableLarge memory capacity (1000000 measured values)Display of limit value violationsWith one internal NTC temperature probe, and one external temperature sensor connection.Tested acc. to EN 12830 for use in the food sector.Scope of supply: Temperature logger, wall bracket, lock, batteries, calibration protocol
Temperature probe for PDF data logger LOG40
External sensor for measuring the temperature. Temperature accuracy ±0.5 °C at -10 to 60 °C.
Temperature probe with stainless steel sleeve, thermocouple type K
Temperature probe with acid-resistant stainless steel sleeve for measurements in liquids, pastes and air. Suitable for measurements in the food industry.
Temperature/humidity logger, testo 175-H1
2-channel temperature and humidity data logger with external humidity sensor (NTC/capacitive humidity sensor)Professional long-term monitoring of temperature and humidity in work and storage roomsFast reaction time thanks to external humidity probeMemory: 1000000 measurement values
Thermocouple, thermocouple Type K, fibre glass insulated
Thermocouple with fibreglass insulation. Accuracy class 1. According to 60584-1.
Thermocouple, thermocouple Type K, PTFE insulated
Thermocouple with PTFE insulation. Accuracy class 1. According to 60584-1.
Thermocouple, thermocouple Type K, with steel braided cable
Thermocouple with steel braided cable with thermocouple strip. Accuracy class 3. According to EN 60584-1.
USB power supply unit
Micro USB power supply unit including cable. For charging testo measuring devices via a mains socket.
Wall holder for PDF data logger LOG40
Holder for storing the data logger LOG40 on the wall.
WiFi Temperature logger testo Saveris 2-T1
The WiFi data logger is ideal for monitoring temperature in rooms. Measurement data is sent to the testo Cloud (online data storage) via wireless LAN and can be accessed and evaluated on all internet-enabled end devices.Internal data memory up to 10000 measured values per channelLimit values adjustable via testo-CloudE-mail notification when limit values are exceededCurrent measured values can be read on the displayMicro USB interfaceWith internal NTC temperature probeScope of supply: WiFi Temperature logger, micro USB cable, wall bracket, batteries, calibration protocol
WiFi Temperature logger testo Saveris 2-T2
The WiFi data logger is ideal for monitoring temperature in rooms. Measurement data is sent to the testo Cloud (online data storage) via wireless LAN and can be accessed and evaluated on all internet-enabled end devices.Internal data memory up to 10000 measured values per channelLimit values adjustable via testo-CloudE-mail notification when limit values are exceededCurrent measured values can be read on the displayMicro USB interface2 connections for external NTC temperature probesAt least one NTC temperature probe is required to operate the testo Saveris 2-T2. Please order separately.Scope of supply: WiFi Temperature logger, micro USB cable, wall bracket, batteries, calibration protocol
WiFi Temperature logger testo Saveris 2-T2 Set
The WiFi Temperature logger Set is suitable for temperature monitoring in refrigerators. The temperature probes with ribbon cable can simply be pushed through the refrigerator sealing. Vials for filling with glycol serve as a temperature buffer. Measurement data is sent to the testo Cloud (online data storage) via wireless LAN and can be accessed and evaluated on all internet-enabled end devices. The testo Cloud Basic package can be accessed free of charge.Internal data memory up to 10000 measured values per channelLimit values adjustable via testo-CloudE-mail notification when limit values are exceededCurrent measured values can be read on the displayMicro USB interfaceScope of supply: WiFi Temperature logger, testo-Cloud access (basic functionality), micro USB cable, wall bracket, batteries, calibration protocol, 2 x penetration probe NTC with ribbon cable, 2 x glycol containers