Accessories for EBI 25 data loggers
Accessories for EBI 25 temperature and humidity data loggers.
Data logger LOG32THP
Temperature-humidity-pressure logger with integrated USB-interface and automatic PDF-creation.Incl. calibration certificateMemory for 3 x 60000 readingsUseable without software (pre-programmed reading interval of 5 minutes)Automatic output as PDF file (no drivers required)Free adjustable recording interval from 30 seconds up to 24 hours (via Software Log Connect)Battery life > 2 years (with recording interval >15 minutes)Status and alarm LEDsWith wall mount, fixing screws, an battery (1/2 AA, 3.6 V)
External temperature probe for data logger LOG200E/LOG220E
Pt 100 temperature probe with 1/3 DIN sensor and cable.
High precision PDF data logger EBI 310 TH
PDF data logger with external humidity and temperature sensor TPH 500, internal temperature sensor can be used additionally. Monitoring the relative humidity in storage and transport. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.Automatic PDF-report creation with temperature/time valuesTransport of drugs, inoculants, blood products and primary productsTransport of all temperature sensitive productsStorage of reference samples in refrigerators and deep-freezers"Traffic light principle" by limit exceededIQ/OQ procedures through standardized software and standard reporting process possibleGMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)Programmable via the free online configurator at www.ebi300.comMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 5 values
Humidity/temperature probe with cable
The digital humidity/temperature probe is suitable for measuring temperature and relative humidity in storage rooms, cold rooms and workrooms or in air conditioning/ventilation ducts.
Mini temperature humidity logger testo 174 H
The mini temperature humidity logger is used to monitor temperature and humidity-sensitive goods and to check the indoor climate. The device can store up to 16000 measured values and guarantees reliable protection against data loss thanks to automatic data backup in the event of an empty battery or battery change. Data can be read out quickly and easily via the USB-C interfaces without a separate readout station. The free ComSoft Basic software enables quick configuration and simple data analysis. It offers Excel export and PDF report generation, ensuring professional documentation. Certified according to HACCP.Scope of supply: Mini temperature humidity logger, wall bracket, batteries, USB 2.0 data transfer cable, test report
Mini temperature humidity logger testo 174 H BT
The mini temperature humidity logger is used to monitor temperature and humidity-sensitive goods and to check the indoor climate. The device can store up to 16000 measured values and guarantees reliable protection against data loss thanks to automatic data backup in the event of an empty battery or battery change. Thanks to the Bluetooth® connection, data can be read out directly at the measuring point up to 30 m away. The free testo Smart App enables simple and intuitive configuration as well as analysis of the measurement data. PDF reports and Excel exports can also be created in the app and supplemented with photos and comments. Certified according to HACCP.Scope of supply: Mini temperature humidity logger, wall bracket, batteries, test report
Mini temperature/pressure data logger EBI 11-TP210
The temperature/pressure data logger is specifically designed to measure temperature and pressure inside a bottle for pasteurization control.Space-saving stainless steel housingWireless measurementM5 threadTemperature-compensated pressure measurement over the complete measuring rangePT1000 temperature probe and piezoresistive pressure sensorMemory for up to 2 x 7500 measured valuesFactory calibration certificate: 0 °C, 60 °C, and 134 °C / 100 mbar, 3100 mbar, and 6000 mbar at 25 °C, 3100 mbar at 134 °CScope of supply: Temperature/pressure data logger
Online data logger testo 160 E
Online data logger with two connections for external sensors for automated monitoring of temperature, humidity, LUX and UV. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 32000 measured valuesTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Measuring ranges depend on the sensor used. Please order sensors separately.Scope of supply: Online data logger, wall bracket, USB interface cable, 4 x AAA batteries, 2 x QR code sticker, test protocol
Online data logger testo 162 IAQ
Online data logger for automated monitoring of temperature, humidity, CO2 and atmospheric pressure with integrated sensors. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 32000 measured valuesMeasuring cycle (battery operation): 5 min to 24 hMeasuring cycle (power adapter): 1 min to 24 hTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Scope of supply: Online data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol, power adapter
Online humidity data logger testo 160 TH
Online data logger for automated temperature and humidity monitoring with an integrated temperature and humidity sensor. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 32000 measured valuesTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Scope of supply: Online humidity data logger, wall bracket, USB interface cable, 4 x AAA batteries, 2 x QR code sticker, test protocol
Online humidity data logger testo 162 H1, with integrated temperature and humidity sensor
Online data logger for automated temperature and humidity monitoring. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 10000 measured values per channelTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Scope of supply: Online humidity data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol
Online humidity data logger testo 162 H2, with one connection for temperature and humidity sensor
Online data logger for automated temperature and humidity monitoring. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 10000 measured values per channelTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Temperature and humidity measuring range depends on the sensor used.Please order temperature and humidity sensor separately.Scope of supply: Online humidity data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol
PTFE filter AH 100
The PTFE filter makes humidity probes dust-tight (IP 60) and thus prevents affecting the humidity measurement.
Stainless steel sintered filter AH 300
The stainless steel sintered filter increases the protection class to IP 40. The stainless steel used increases the mechanical protection and is highly resistant to corrosion, even in high-temperature applications.
Standard PDF data logger EBI 300 TH
PDF data logger with external humidity and temperature sensor TPH 400, internal temperature sensor can also be used.For temperature monitoring related to HACCP/IFS issues or other perishable goodsTransportation of fresh, cool and deep cool productsMonitoring of fridges and deep freezersEvaluation without software, PDF are automatically generatedMinimise training, user errors and IT costs using EBI 300's simple, easy to use design and standard softwareEnsure data integrity since no data manipulation is possibleEN 12830, ATP, VO(EG) 37/2005 CompliantFactory calibration certificate includedProgrammable via the free online configurator at www.ebi300.comNo separate interface for programming and readingMemory: 40000 samplesMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 2 values, high and low limits
Temperature and humidity logger LOG210 TC
Data logger with motion sensor, integrated USB interface for automatic PDF output and wall mount. For measurement and recording of temperature and humidity and 2 connections for external type K thermocouples.Freely adjustable recording interval from 10 seconds to 24 hoursMin- and Max-values can be reset in the displayTime marking function ("Time Marker") during data recordingWith movement sensor for shock recordingMemory for approx. 60000 measurementsAutomatic output as PDF file, device can also be used without softwareNo driver installation neededStatus and alarm LEDs, with buzzerDisplay can be switched offBattery life > 4 years at > 15 min measuring interval (free of charge)USB interface for data transferSoftware available for download on the manufacturer's websiteTemperature and humidity sensors are available separately.Scope of supply: Data logger, 2 thermocouples type K (1 m length), wall mount, battery (1/2 AA, 3.6 V), USB cover, screws and dowels
Temperature and humidity sensor with with plug-in cable
Small, precise sensor for measuring temperature and relative humidity in display cabinets. The cable can be easily by replaced with a longer cable. No effect on the air exchange rate in the display cabinet thanks to the supplied wall bushing with O-ring seal.Accuracy humidity:±1.0 %RH hysteresis±1.0 %RH/year drift±2.0 %RH at 25.0 °C and 20 to 80 %RH±3.0 %RH at 25.0 °C and <20 %RH and >80 %RH
Temperature, humidity, pressure and CO2 logger LOG220E
Data logger for temperature, humidity and pressure recording with an external connection for a CO2 sensor or humidity, pressure and temperature sensor.Freely adjustable recording interval from 10 seconds to 24 hoursMin- and Max-values can be reset in the displayTime marking function ("Time Marker") during data recordingWith movement sensor for shock recordingMemory for approx. 60000 measurementsAutomatic output as PDF file, device can also be used without softwareNo driver installation neededStatus and alarm LEDs, with buzzerDisplay can be switched offBattery life > 4 years at > 15 min measuring intervalUSB interface for data transferSoftware available for download on the manufacturer's website (free of charge)Temperature, pressure humidity and CO2 sensors are available separately.Scope of supply: Data logger, wall mount, battery (1/2 AA 3.6 V), USB cover, screws and dowels
Temperature-humidity data logger EBI 12-TH100-EX
Robust data logger for precise measurement of relative humidity during process validation of sterilization processes with ethylene oxide.1 external PT1000 temperature sensor1 external capacitive humidity sensorCombined sensor replaceableReal-time data transmissionStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 50160 measured values per measurement channelStainless steel housingFactory calibration certificate: 0 °C and 60 °C; 32.8 %rH, 52.9 %rH, and 75.4 %rH at 25 °CApproved for use in EX areas: II1G Ex ia IIC T4 Ga
Temperature-humidity data logger Traceable®
Data logger with integrated sensors for monitoring temperature and relative humidity. The data logger can be connected to a Bluetooth®-enabled mobile device via the Bluetooth® interface. With the TraceableGO™ app (free of charge) or the TraceableLIVE™ cloud service (chargeable, registration required), measured values can be exported as a PDF, sent by e-mail, and stored on a mobile end device.Large LCD displayDisplay changes between temperature and humidity every 5 secondsSwitchable °C/°FLimit values and logging interval adjustable via TraceableGO™ or TraceableLIVE™ appStorage of up to 90 different alarm messagesMemory: 65536 measuring valuesNIST-traceable certificate includedScope of supply: Temperature-humidity data logger, batteries, NIST-traceable calibration certificate