Digital torque measurement
For torque testing of bottles and other packaging with screw tops. Quick pin system: The four bottle mounts are pushed in, instead of being screwed in, to save time. This allows you to reconfigure quickly for other bottle sizes.Can be used in both directions of rotationMetal housingCapacity display: A bar lights up to show how much of the measuring range is still availablePeak hold mode to capture peaksFunction to set limits: Input of an upper/lower limit valueVisual and acoustic signalAUTO-OFF functionBack-lit LCD graphic displayInternal data memory saves up to 500 measurementsMemory contents can be transferred to the PC using optional softwareUSB and RS 232 data interfacesRubber feet with anti-slip featureScope of supply: Digital torque measurement, four bottle mounts with rubber coat, sturdy carry case
Drying pads grade 556
Absorbent paper strips for the removal of excess liquids, e.g., from microscope specimens (100 x 50 sheets).
Gloss meter TG 268
Versatile, portable gloss meter designed for fast and accurate measurement of low, medium or high gloss levels of coatings, plastics and related materials. The device is also suitable for large-scale uniformity checks in continuity mode.Basic, statistical and continuous measurement methodsDisplay of 5 data rows including storage capacity of more than 5000 data setsTFT 3.5 inch, capacitive touchscreenIntuitive, integrated software with icon guideUSB and RS 232 interfacesSupports ASTM D523, ASTM C584, ASTM D2457, BS3900 D5, DIN 67530, DIN EN ISO 2813, EN ISO 7668 and JI Z 8741 standardsScope of supply: Gloss meter, OnGloss software (PC), calibration plate, USB cable, external DC power supply, user manual (USB stick), carrying case, batterySpecificationsMeasuring angle:20° / 60° / 85°Measuring range:20°: 0 ... 2000 GU 60°: 0 ... 1000 GU 85°: 0 ... 160 GUResolution:0.1 GUEnvironmental conditions:0 ... 40 °C, 85% RHDimensions (W x D x H):160 x 75 x 90 mmWeight:350 gPower supply:3200 mAh Li-ion batteryStorage:Basic Mode: 1000 Statistical Mode: 5000 Continuous Mode: 5000
Incident and transmitted light microscopes Panthera TEC MAT
Incident and transmitted light microscopes for science materials, inspection of semiconductor components, LCD displays and wafers, equipped with an intelligent brightfield / darkfield illumination concept. The microscope models with additionally integrated LED transmitted light expand the application options in the direction of complex composite materials.Tube type Siedentopf, swivelingWidefield oculars for spectacle wearers with diopter adjustment on both ocularsCCIS® Plan Achromat & S-APO (PB free), DIN objectivesReversed coded nosepieceLED incident light illuminator with field and aperture diaphragm, with slots for polariser / analyser slidersWith interchangeable illuminationMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorCoaxial coarse and fine focusing system with tension adjustmentIntegrated power supply with sleep modeUSB 2.0 for external camera powerAdditional equipment depending on the model with bright field (transmitted light), segmentable dark field (reflected light), polarization (reflected light)Scope of supply: Dust cover, power cord, allen key, screws for metal extension support
Jolting Volumeters
For determination of volumes before and after tamping and tamping density, as well as compaction. Acc. to European Pharmacopoeia, DIN ISO 787 part 11, ISO 3953, ISO 8967 and ASTM B 527-93.SpecificationsSpeed of camshaft:250 rpm ±15 rpmMotor rating:50 WDropping height of the guide punch:3 mm ±0.1 mmDimensions (W x D x H):Approx. 330 x 290 x 180 mm (without measuring cylinder)Net weight:Approx. 9 kgPower supply:230 V, 50 Hz
Leeb hardness tester, mobile
The Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.External impact sensorAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 600 data groupsMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmedAcoustic and visual signalMatrix display: Backlit multi-function displayRobust metal housingScope of supply:HK-D: Mobile Leeb hardness tester, hard carrying caseHK-DB: Mobile Leeb hardness tester, hard carrying case, standard block for calibration, hardness approx. 800 HLD
Leeb hardness testers, mobile, HMM, with printer
Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values.External impact sensor (Type D) includedAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionStandard block for calibration included (approx. 790 ± 40 HL)Internal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsDelivered in a hard carrying caseWireless IR printer included for on-site printing of measurement protocols (battery operated)
Leeb hardness testers, portable, HMM
Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness valuesAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsAUTO-OFF function, battery level indicatorScope of supply:Leeb hardness tester, external impact sensor, standard block for calibration (approx. 790 ± 40 HL), carrying case
Leeb hardness testers, portable, HMO
Portable Leeb hardness tester for professional applications.Innovative touchscreenAutomatic recognition of the impact (rebound) sensor connected to the HMOAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to measurementsMini statistics function: Displays the measure value, the average value, the difference between the maximum and minimum values, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsRechargeable battery operationUSB interface for connection to the printer and charging the batteriesScope of supply:Leeb hardness tester, carrying case, standard block, mains adapter
Leeb hardness testers, portable, HN-D
Pen type hardness testing device in accordance with Leeb testing for mobile hardness testing of metals.LCD displayAll measurement directions possible (360°) thanks to an automatic compensation functionInternal impact sensor (Type D)Internal memory for up to measurements with date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL)Rechargeable battery operationData interface USBScope of supply:Leeb hardness tester, carrying case, USB interface cable, mains adapter
Mechanical force gauge FA
For measuring push and pull forces with peak hold function.Dual scale: shows Newton and kgRotatable display unit for an easy calibration of the instrumentPeak hold function by drag pointerCan be mounted on all manual test standsZeroing by a short push of the switchScope of supply:Mechanical force gauge, carrying case, standard attachments, extension rod 90 mm
Microscope Cleaning Kit
Content: 1 power blower, cleaning liquid, cleaning cloth, retractable brush
Polarisation microscope Panthera TEC POL
Powerful polarisation microscope for all material sciences. Maximum flexibility for all applications in polarisation microscopy, suitable for transparent as well as opaque samples from the education sector and industrial quality assurance.Tube type Siedentopf, swivelingWidefield oculars for spectacle wearers with diopter adjustment on both ocularsCCIS® Plan achromatic objectives UC PL (strain-free)Reversed coded nosepiece with single centering holesBertrand lens and slot for compensatorsFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.90/0.13 (strain-free) and rotatable polariserIllumination acc. to Köhler, with interchangeable illuminatorMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorCoaxial coarse and fine focusing system with tension adjustmentCompact, built-in mechanical stageIntegrated power supply with sleep modeVisual camera outputUSB 2.0 for external camera powerScope of supply: Microscope, dust cover, power cord, Allen key, blue filter, halogen bulb, LED module, adjustable key for nosepiece, interference color chart, screws for metal extension support
Shore hardness testers, analogue, HB
Compact handheld durometer for plastics with drag indicator.Measurement of penetration depth (Shore)Material thickness of the sample, min. 6 mmParticularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 48-4 are not possible because of very narrow standard tolerancesCan be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)Max mode: Holds the maximum value in the displayPoint mode: Shows one instant valueScrews to screw on to the TI: M7 fine threadDelivered in a plastic carrying caseShore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materialsShore A0: foams, spongesShore D: plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.
Shore hardness testers, digital, HD
Compact handheld durometer for plastics with digital display.Measurement of penetration depth (Shore)Material thickness of the sample, min. 6 mmParticularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 48-4 are not possible because of very narrow standard tolerancesCan be attached to the test stands TI-ACL (for Shore A and Shore 0) and TI-DL (for Shore D)Large display with backlightSelectable: AUTO-OFF function or continuous operation, charge indicatorDelivered in a hard carrying caseShore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materialsShore 0: foams, spongesShore D: plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.
Test stand set TVL
For tensile and compressive force measurement. The set consists of test stand TVL, digital force gauge FH 500, 2 x screw clamp AE 500, threaded pin AFM 20.
Test stand TVL, manual
Manual test stand for highly accurate tensile and compressive force measurement, with length measurement.For vertical and horizontal usePrecise measurement resultsHigh level of security with repeated measurementsLarge base plate with various holes for fixture mountingsCan be used for force gauges up to 500 N (not included)Digital length meter: Zero setting possible, pre-length can be set manually
Test stand TVL-XLS, manual
Manual test stand for highly accurate tensile and compressive force measurement, with length measurement.For vertical and horizontal usePrecise measurement resultsHigh level of security with repeated measurementsLarge base plate with various holes for fixture mountingsCan be used for force gauges up to 500 N (not included)Digital length meter: Zero setting possible, pre-length can be set manually
Test stand TVP
Manual test stand for compressive force measurement.Quick and consistent testingHigh level of security with repeated measurementsPrecise measuring resultsSlide construction for distance measurementLarge base plate with various holes for fixture mountings
Texture analyser TX-700
The texture analyser TX-700 is a testing device for determining the physical properties of various substances and materials. E.g. the elasticity, the adhesiveness and the strength of substances can be measured. The TX-700 is ideal for your consistent, elastic and adhesive products.Wide selection of different test specimensDisplay settings: force, speed, distance, time, temperature, measuring sensor, force sensorUnits: Gram or NewtonMeasurement modes: Penetration, compression, traction, relaxation, TPA cycleIncludes PT100 probe for temperature measurement from -50 to 300 °CSpeed adjustable from 0.1 to 10 mm/sRS232 and USB interface
Texture analyser TX-900
The texture analyser is a testing device for determining the physical properties of a wide range of substances and materials. Among other things, the elasticity, adhesion, and strength of materials can be determined. Customised methods can be programmed and saved in the TX-900. Measurements are displayed directly as curves on the large colour touchscreen. Measurement results can be exported and saved on a USB stick.Large selection of different test specimensDisplay settings: Force, speed, distance, time, temperature, measuring sensor, force sensorUnits: Gram or NewtonMeasurement modes: Penetration, compression, traction, relaxation, TPA cyclePT100 probe for temperature measurement from -50 to 300 °CSpeed adjustable from 0.1 to 10 mm/sRS232 and USB interface