Alcoholmeters with thermometer
Alcoholmeters with an error limit of ±0.1 % vol. Temperature range from 0 to 30 °C with 0.5 °C graduation and an accuracy of ±1 °C. Blue filling. Packed in square plastic sleeve.
Alcoholometer according to E.E. 76/765
According to E.E. 76/765. Class II, ethanol % vol. Suitable for official testing. Reference temperature: 20 °C. With thermometer.
Alcoholometer, Richter-Tralles type
0 to 100 % mas / % Vol at reference temperature: +20°C.Without thermometer. With DAkkS calibration certificate and 3 checkpoints.Packed in a square plastic sleeve.
Alcoholometer, Richter-Tralles type
0 to 100% at reference temperature: 20°C.Without thermometer.
ASTM Hydrometers
Precision hydrometers acc. to ASTM E2995-14 for determination of density for mineral oil, with thermometer "mercury free".Hydrometer with thermometer, error-limit for density: ± 0,5 kg/m³, with thermometer -20 to +65°C in 1°C, blue filling, error-limit ± 1°C. With works calibration on request. With blue, environmental friendly filling of thermometers. Each item packed in plasic tubes for breakage protection.
ASTM Hydrometers, with works calibration and 3 checkpoints
Precision hydrometers acc. to ASTM E2995-14 for determination of density for mineral oil, with thermometer "mercury free".Hydrometer with thermometer, error-limit for density: ± 0,5 kg/m³, with thermometer -20 to +65°C in 1°C, blue filling, error-limit ± 1°C. With blue, environmental friendly filling of thermometers. Each item packed in plasic tubes for breakage protection.
Battery hydrometer
Battery acid tester 1.10 to 1.30.Boxed complete with glass tube, rubber bulb and hydrometer.
Combined density and refractometry index standards
For density and refractometer calibration in one step. Bottles can directly be used in SC1 and SC30 automation units. Coded with barcodes for fully automatic verification procedure in METTLER-TOLEDO LiQC systems.
Density bottles, Borosilicate glass 3.3., uncalibrated
All BLAUBRAND® density bottles are supplied with one accompanying individual certificate in the original packaging. On request, they are also available with a DAkkS calibration certificate.DIN ISO 3507,Gay-Lussac typeStopper NS 10/19 with capillaryTop of stopper ground and polishedNominal capacity printed on the bottom
Density hydrometers without thermometer
Scale 0,300 up to 0,500 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, capilary round, in transparent plastic case. Reading below.
Density hydrometers without thermometer
Scale 0,100 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, in transparent plastic case. Reading below.
Density hydrometers without thermometer
Scale 0,100 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, in transparent plastic case. Reading below.* Complete set with 14 insturments in stuffed case.
Density meter Densito
Robust density meter for mobile use with easy handling and user guidance. Ideal for rapid and accurate routine measurements in quality assurance, incoming and outcoming goods inspection.Automatic sampling pumpAvailable measurement scales: API, °Baumé, Brix, density, Ethanol, H2SO4, proof (US and IP), °Plato, specific gravity, user-defined concentrationAutomatic temperature compensationMemory for up to 1100 resultsBacklit measuring cellAdjustable limits with customisable colours in the displayBright display with good readabilityPower supply: Removable and rechargeable Li-Ion batteries
Density meter DensitoPro
Robust density meter for mobile use with easy handling and user guidance. Ideal for rapid and accurate routine measurements in quality assurance, incoming and outcoming goods inspection.DensitoPro equipped with RFID and barcode reader for rapid and reliable tracing of samples.Automatic sampling pumpAvailable measurement scales: API, °Baumé, Brix, density, Ethanol, H2SO4, proof (US and IP), °Plato, specific gravity, user-defined concentrationAutomatic temperature compensationMemory for up to 1100 resultsBacklit measuring cellAdjustable limits with customisable colours in the displayBright display with good readabilityPower supply: Removable and rechargeable Li-Ion batteries
Density meter DMA 501
Density meter for measuring of chemicals, pharmaceuticals, cosmetics and food. Suitable for samples with difficult properties like paste, inhomogeneous, sedimenting and particulate samples or aerosol sprays.The DMA 501 contains all relevant concentration tables and formulas for calculating product specific parameters and the results are displayed in the appropriate unit. Automatic filling and measuring with the optional available industrial peristaltic pump possible.Camera image of the measuring cell (U-view™) for viewing the correct sample filling, whereby potential filling errors due to inhomogeneous samples, gas bubbles or paticles are automatically detected with the FillingCheck™ functionSplash-proof frontFanless temperature control of the sampleUser-defined layouts of the measurement display with result outputs for individual requirementsDocumentation and traceability of dataElimination of external influences through the implementation of a standardised sample handlingIntegrated temperature and humidity sensorIntegrated pressure sensor for adjustmentAutomatic full-range viscosity correction of resultsMinimal sample volume: approx. 1 ml3 years warranty
Density meters DMA 35
Portable, digital measuring device for the determination of density, relative density and concentration. DMA 35 EX and DMA 35 EX Petrol are certified according to ATEX for applications in hazardous environments.On-site measurements for fast reactionsOscillator principle (borosilicate glass oscillator)Sample filling via manual filling pump or syringeComplete data control through traceabilityViscosity correction for measurements also on highly viscous samplesGesture control for one-handed measurementRecognition of results outside the tolerance limitMeasuring of density, relative density, alcohol concentration, sugar/extraction concentration, API functions, H2SO4 concentration, ten programmable custom-specific measuring unitsRobust case with exchangeable cell3 years warrantyScope of supply: Density meter, filling tube, adapter for syringe filling, syringes, transportation case, rubber protection for measuring cell, 3 x batteries, allen key, instructions.
Density standards
Density measurements with these standards are traceable to the primary method. Compatible with density and sound velocity meters.ISO 17034-certified reference materials. Fulfils the requirements of ISO 17025 and ISO 17034. Capacity: 10 ml. Shelf life: 18 months.
Hydrometer
Acc. to DIN 12791. Error limit ±0.001 g/cm3.Packed in a square plastic sleeve.
Hydrometer cylinders, PP
Highly transparent. For density measurements using a hydrometer. Hydrometer can be read through the overflow vessel with a completely filled cylinder.With spoutMolded graduations and ring marks at the primary scale pointsCalibrated to contain (IN)Hexagonal base with bottom studs