Accessories for Laboratory conductivity meter 703
ZU 6985: 4-pole conductivity probe with integral temperature sensorZU 6945: Calibration solution for analysis and control of cell constant (1 ampoule produces 1 litre of 0.1 N salt solution)
Calibration and test material for conductivity measurements
Test resistors and calibration solutions to test the meters with conductivity function as well as to calibrate the system from the device and conductivity measuring cellOptimal measuring safety by PTB/NIST traceable standard solutionsEasy device check by highly precise test resistorsPharmacopeia conforming test kits
Calibration solutions TDS
Disposable bags for effective calibration. Traceability according to NIST.
Cleaning and storage solutions for pH electrodes
These solutions prolong life and restore performance of pH electrodes or are used for storage and cleaning.Cleaning solutionsCleaning solution A for removing protein contaminantsCleaning solution C for general cleaningCleaning solution D for removing oil and grease contaminantsSolutions are delivered with a small beaker and a plastic pipette.Storage solutionsEnsure the proper function of pH electrodes even after prolonged storage
Conductivity calibration solutions
Disposable bags for effective calibration. Traceability according to NIST.
Conductivity calibration solutions
For the qualified calibration of conductivity measuring systems according to ISO. The reference temperature of the calibration solution is 25 °C. Highest precision of ±0.5 %. Traceable to international standards: SRM by NIST. With quality certificate.
Conductivity cell probe TetraCon® DU/T
For all Cond handheld meters for analogue measuring cells from the 3xx series, as well as all inoLab® laboratory measuring devices for analogue measuring cells. Except for the Cond 3110, Multi 340 handheld meters.Conductivity flowthrough cell TetraCon® DU/T:4-pole conductivity cell with integral temperature sensor for standard applications. Connection via 10 mm diameter tubing nozzles (the adapter cable KKDU with 1 metre cable is required for connection). Filling volume 7 ml.
Conductivity cell probes LR 325/01
For all Cond handheld meters for analogue measuring cells from the 3xx series, as well as all inoLab® laboratory measuring devices for analogue measuring cells. Except for the Cond 3110, Multi 340 handheld meters.Ultra-pure water conductivity cell probe LR 325/01:With integral temperature sensor and flowthrough vessel D 01/T for measuring very low conductivity ranges (<1 µS/cm) e.g. boiler feed water or deionised water. Min./max. insertion depth 35/110 mm.
Conductivity cell probes TetraCon® 325
For all pocket measuring devices for analog measuring cells from the 3xx series, as well as all inoLab laboratory measuring devices for analog measuring cells.Standard conductivity cell probe TetraCon® 325:4-pole cell with integral temperature sensor.Special conductivity cell probe TetraCon® 325/C:As TetraCon® 325, 4-pole cell with integral temperature sensor, but with sensor head made of chemically resistant PEEK.
Conductivity electrode CONSEN9103J
2-electrode measuring cell made of PP with Ultem housing and stainless steel rings. For fast and precise conductivity and temperature measurements in the field and laboratory. With 8-pin connector. Suitable for devices COND 610, COND 600, CD 650, PC 650 and PCD 650.
Conductivity electrode CONSEN91B
2-electrode measuring cell made of PP with Ultem housing and stainless steel rings. For fast and precise conductivity and temperature measurements in the field and laboratory. With BNC and phono connector. Suitable for devices COND 6+, TDS 6+ and Salt 6+.
Conductivity electrode CONSEN91W
2-electrode measuring cell made of PP with Ultem housing and stainless steel rings. For fast and precise conductivity and temperature measurements in the field and laboratory. With 6-pin connector. Suitable for devices CON 510, CON 400, CON 410, PC 300, PC 510, CON 11 and CON 110.
Conductivity measuring cells InLab®, graphite
4-electrode measuring cells made of graphite with integrated temperature sensor and fixed cable. Ideal for samples with normal and high conductivity.
Conductivity measuring cells InLab®, platinum
Electrode measuring cells made of platinum with integrated temperature sensor and fixed cable. For aggressive or organic samples.
Conductivity measuring cells InLab®, stainless steel
2-electrode measuring cells made of stainless steel with integrated temperature sensor and fixed cable. Ideal for samples with low conductivity such as pure water and ultrapure water.
Conductivity measuring cells InLab®-ISM, graphite
4-electrode measuring cells made of graphite with integrated temperature sensor and fixed cable. Ideal for samples with normal and high conductivity.ISM® (Intelligent Sensor Management) is a sophisticated safety concept that leaves nothing to chance. The instrument automatically detects the connected sensor and uses the most up-to-date calibration data stored on the sensor chip.
Conductivity measuring cells InLab®-ISM, stainless steel
2-electrode measuring cells made of stainless steel with integrated temperature sensor and fixed cable. Ideal for samples with low conductivity such as pure water and ultrapure water.ISM® (Intelligent Sensor Management) is a sophisticated safety concept that leaves nothing to chance. The instrument automatically detects the connected sensor and uses the most up-to-date calibration data stored on the sensor chip.
Conductivity measuring cells LF 435 T
With plastic shaft and internal temperature sensor NTC30 kOhm. Cable with 8-pole plug.Conductivity measuring cells with 4 electrode technique for a large measuring range of 5 µS/cm to 500 mS/cm, low maintanance and easy cleaning. For general measurements.Excellent linearity over a wide measuring range, especially for high conductivity valuesEasy cleaningLong term stable cell constant through abrasion resistant, concentric graphite electrodesIntegrated temperature sensor with short response time for automatic temperature compensation
Conductivity measuring cells LF 613 T
With plastic shaft and internal temperature sensor NTC30 kOhm. Cable with 8-pole plug.For field and laboratory measurments in a measuring range of 1 µS/cm to 2000 mS/cm. Less polarisation effects through 4 electrode measuring technique with platinum ring electrodes. Easy cleaning through removable low shaft ending.
Conductivity meter CT 830
With automatic measuring range switching.The meter is the ideal choice for determination of conductivity, salinity and temperature and combines the features for mobile application in the field with the precision and comfort of a laboratory meter. In the standard version the meter CT 830 is supplied with conuctivity sensor AT 830 C and 1.50 m cable. It is ideally suited for overall applications in the field and in laboratories. Two parallel, largely dirt-insensitive graphite electrodes, the integrated temperature sensor for parallel temperature measurement, an automatic temperature compensation and the wide measuring range are the benefits of the conductivity sensor.Scope of supply: Meter incl. conductivity sensor, calibration solution 0,1 N / KCL 1288 µs, case