Cases for climate measuring devices testo 440
For storing and transporting the climatic measuring device testo 440 and additional probes.
Climate measuring instrument testo 440 with CO2 sensor
For reliable assessment of indoor air quality. Complete set for long-term measurement and parallel determination of CO2 concentration, humidity and indoor air temperature. Consisting of the climate measuring device testo 440, a multifunctional, wireless handle and CO2 sensor. With absolute pressure compensation, calculation of wet bulb temperature, dew point and absolute humidity. Fully configured, ready for use.Wireless handle with Bluetooth® technologyEasy, intuitive operationEasy storage of measured values by means of a button on the handleLarge, illuminated graphic LCD with parallel display of 3 measured valuesMeasuring instrument with magnetic fixation on metal surfacesInternal data storage and USB interfaceHandle can be extended with other probes to measure further parametersAutomatic probe recognitionDimensions (instrument, W x D x H): 65 x 32 x 154 mmDimensions (handle, W x D x H): 50 x 40 x 295 mmPower supply (instrument): 3 x AA 1.5 VPower supply (handle): 4 x AA 1.5 VScope of supply: Multifunctional climate measuring instrument testo 440, USB cable, handle with CO2 probe incl. temperature and humidity sensor, table stand, batteries and calibration protocols for measuring device and sensors, transport case
Climate measuring instruments testo 440
The climate measuring instruments testo 440 combine the benefits of a compact handheld device with intuitive measurement menus and a comprehensive selection of air velocity & IAQ probes. Both the digital Testo Smart Probes and numerous Testo temperature probes can be connected. Clearly structured menus for measuring volume flow in ducts/at outlets, degree of turbulence, cooling/heating load, mould indication and logging mode are stored on the instrument.The testo 440 dP also has an integrated differential pressure sensor. This makes measurements at filters as well as Pitot tube and K-factor measurements possible.USB interface for data export and optional printout of measuring valuesUp to 3 probes can be connectedParallel display of 3 measuring valuesBluetooth probes for measuring convenience and easy storage in the caseUniversal handle for all probesMeasurement of the following parameters are possible: °C, % r.h., CO, CO2, m/s, Lux, hPaPlease order probes separately.SpecificationsTemperature measuring range (NTC):-40 ... +150 °CAccuracy:±0.4 °C (-40 ... -25.1 °C) ±0.3 °C (-25 ... +74.9 °C) ±0.4 °C (+75 ... +99.9 °C) ±0.5 % of measured value (remaining range)Resolution:0.1 °CTemperature measuring range (TE Typ K):-200 ... +1370 °CAccuracy:±(0.3 °C + 0.3 % of measured value)Resolution:0.1 °CDifferential pressure measuring range testo 440 dP:-150 ... +1500 hPaAccuracy:±0.05 hPa (0 ... +1.00 hPa) ±0.2 hPa + 1.5 % of measured value (+1.01 ... +150 hPa)Resolution:0,01 hPaMemory:7500 measurement protocolsOperating / storage temperature:-20 ... +50 °CDimensions (W x D x H):65 x 32 x 154 mmWeight:250 gPower supply:3 x Mignon, Type AA
CO meter testo 317-3
The CO meter is suitable for measuring carbon monoxide in ambient air.No zero phase, device is immediately ready for useCO zeroing at siteAlarm threshold freely adjustableAcoustic and optical alarm when limit value is exceededScope of supply: CO meter, carrying case with belt clip, earphones, handstrap, calibration protocol
CO2 Meter Air CO2ntrol Life
Ideal for monitoring air quality in rooms. LED lights in traffic light colours below the display provide information about the current CO2 content in the air (green: <800 ppm, yellow: 800 to 1200 ppm, red: >1200 ppm).Display of temperature and humidityAdjustable alarmScope of supply: CO2 meter, power adapter, operating instructions
CO2 meter testo 535
Compact meter for simple, fast, and precise measurement of CO2 concentration to ensure indoor air quality. Measurement data can be transmitted to smartphones or tablets via Bluetooth®. The connection to the free testo Smart App enables configuration of the device as well as display, storage, and documentation of measurements.High reproducibility of measurement results due to long-term stable infrared sensor technologyAcoustic alarm when limit values are exceededTime and point averagingQuick in-app configuration, graphic history, second screen, and measurement data memory in the testo Smart AppDisplay illuminationHold functionDisplay of min./max. valueScope of supply: CO2 meter, transport bag, calibration protocol, batteries
CO2 Meter, Air CO2ntrol 3000
Large displayIncl. Power supply for 230 VAC24-hour data loggerAdjustable Alarm°C/°F-selectableRelay output for ventilation controlApplications: Ideal for monitoring the environment (CO2 concentration) in public buildings, such as universities, schools, for e.g. Hospitals, Education, Office, Production Plants, Public Facilities.
CO2 Meter, Air CO2ntrol 5000
With data logger function, ideal for monitoring the CO2 concentration in buildings.Logger function saves the data as a CSV file on Micro SD cardLEDs for visual identification of CO2 concentrationDisplays temperature, Humidity and CO2 contentIndividual alarm settingBench- and wall mountingScope of supply: Meter incl. USB mains adapter, Micro SD card
Differential pressure measuring instrument testo 512-1
Measuring instrument for simple, fast, and precise differential pressure measurements for controlling the gas pressure on burners and checking filters. Measurement data can be transmitted to smartphones or tablets via Bluetooth®. The connection to the free testo Smart App enables configuration of the device as well as display, storage, and documentation of measurements.Reliable measurement results due to position-independent differential pressure sensor with high accuracyAcoustic alarm when limit values are exceededTime and point averagingQuick in-app configuration, graphic history, second screen, and measurement data memory in the testo Smart AppDisplay illuminationCompact design with sturdy housingHold functionDisplay of min./max. valueMeasurement of flow velocity and volume flow calculation by separately available pitot tubeScope of supply: Differential pressure measuring instrument, transport bag, silicone connection hose, calibration protocol, batteriesMeasuring range:0 ... 200 hPaAccuracy:±0.3 Pa + 1 % of measured value ±1 Digit (0 ... 25 hPa) / ±0.1 hPa + 1.5 % of measured value ±1 Digit (25.001 ... 200 hPa)Resolution:0.001 hPa (0 ... 2 hPa) / 0.01 hPa (2.01 ... 20 hPa) / 0.1 hPa (20.1 ... 200 hPa)Compatibility mobile device:Requires iOS 12.0 or newer, Android 6.0 or newer, Bluetooth® 4.2.Power supply:3 x AA
Differential pressure measuring instrument testo 512-2
Measuring instrument for simple, fast, and precise differential pressure measurements for controlling the gas pressure on burners and checking filters. Measurement data can be transmitted to smartphones or tablets via Bluetooth®. The connection to the free testo Smart App enables configuration of the device as well as display, storage, and documentation of measurements.Reliable measurement results due to position-independent differential pressure sensor with high accuracyAcoustic alarm when limit values are exceededTime and point averagingQuick in-app configuration, graphic history, second screen, and measurement data memory in the testo Smart AppDisplay illuminationCompact design with sturdy housingHold functionDisplay of min./max. valueScope of supply: Differential pressure measuring instrument, transport bag, silicone connection hose, calibration protocol, batteriesMeasuring range:0 ... 2000 hPaAccuracy:0.5 % of measuring rangeResolution:1 hPaCompatibility mobile device:Requires iOS 12.0 or newer, Android 6.0 or newer, Bluetooth® 4.2.Power supply:3 x AA
Differential pressure meter testo 510
Very handy, small and easy to operate pressure meter for differential pressure and flow velocity measurement values. The backlit display allows the measurement values to be easily read out, even in unfavourable light conditions. The testo 510, in combinationwith a Pitot tube, measures air flow velocity. For accurate measurement values, the air density can be compensated.Flow velocity measurement possible with Pitot tubeTemperature and air density compensation10 selectable units (hPa, mbar, Pa, mmH2O, inH2O, inHg, mmHg, psi, m/s, fpm)Scope of supply: Meter incl. tubing set (diam. 4 mm and 5 mm) with adapter, protective cap, calibration protocol, belt holder, batteriesSpecificationsMeasuring range:0 to 100 hPaAccuracy:±0.03 hPa (0 to 0.30 hPa) ±0.05 hPa (0.31 to 1.00 hPa) ±(0.1 hPa + 1.5 % v. Mw.) (1.01 to 100 hPa)Resolution0.01 hPaPositive pressure:500 mbarMax. static pressure:1.5 barOperating temperature:0 to +50 °CStorage temperature:-40 to +70 °CPower supply: Battery life:2 Microcells AAA 50 h (average, without display illumination)Measuring rate:0.5 sDimensions (L x D x H):119 x 46 x 25 mmWeight:90 gIP code:IP 40
Differential pressure meter testo 510i
The Differential pressure meter testo 510i is suitable for measuring gas flow and static pressure. Quick and easy transmission of the measurement data to smartphone or tablet via Bluetooth®. With the free testo Smart App measurement data can be displayed as tabular form or as a diagram and results can be sent as a PDF or Excel file.Measurement of volume flow and air velocity possible with additional pitot tubeMeasurement menu for pressure drop test with alerts in the testo Smart AppSelectable units of measurement: mbar, hPa, Pa, mmHg, inHg, in WC, psi, mmWCMagnetic holderScope of supply: Differential pressure meter, hose set (Ø 4 mm and 5 mm), adapter, batteries, calibration protocolMeasuring range:-150 ... 150 hPaAccuracy:±0.05 hPa (0 ... 1 hPa), ±0.2 hPa + 1.5 % of measurement value (1 ... 150 hPa)Resolution:0.01 hPa
Digital Anemometer
For the measurement of wind speed (in m/s, km/h, mph, knots, ft/min), maximum and average wind speed, indication of temperature (in °C or °F). LCD backlight display. Auto/Manual power off. Useful for the functional check of fume hoods and safety cabinets.
Digital probes for climate measuring instrument testo 440
Digital probes with intelligent calibration concept. Integrated, extendable telescope enables convenient measurement.
Globe thermometer for testo measuring instruments
Globe thermometer for measuring radiant heat acc. to ISO 7243, ISO 7726, DIN EN 27726, and DIN 33403.
High pressure meter testo 549i
The High pressure meter testo 549i is suitale for measurement of high and low pressure. Quick and easy transmission of the measurement data to smartphone or tablet via Bluetooth®. With the free testo Smart App, measurement data can be displayed as tabular form or as a diagram and results can be sent as a PDF or Excel file.45° angle facilitates installation at the pressure connectionLow refrigerant loss thanks to hose-less measurementSelectable units of measurement: bar, psi, MPa, kPaScope of supply: High pressure meter, batteries, calibration protocolMeasuring range:-1 ... 60 barAccuracy:0.5 % of full scale valueResolution:0.01 barConnection:7/16" - UNFCompatibility mobile device:Requires iOS 11.0 or newer; Android 6.0 or newer; Bluetooth® 4.0Bluetooth® range:100 mDimensions (L x W x H):125 x 32 x 31 mmWeight:156.6 gPower supply:3 x AAA
Hot-wire anemometer testo 425
Hot-wire anemometer for simple, fast, and precise flow and temperature measurement as well as volume flow calculation. Measurement data can be transmitted to smartphones or tablets via Bluetooth®. The connection to the free testo Smart App enables configuration of the device as well as display, storage, and documentation of measurements.Cable-connected, extendable telescopic probe up to 820 mmTime and point averagingQuick in-app configuration, graphic history, second screen, and measurement data memory in the testo Smart AppCompact design with sturdy housingHold functionDisplay of min./max. valueAccuracy of flow speed: ±0.03 m/s + 4 % of measured value (0.01 to 20 m/s), ±0.5 m/s + 5 % of measured value (20.01 to 30 m/s)Scope of supply: Hot-wire anemometer with telescopic probe, transport bag, calibration protocol, batteries
Light measuring instrument SO
Light measuring instrument for precise light measurement up to 200,000 LuxMeasures illumination in the workplaceHelps to determine whether a workstation has insufficient light or whether there is too much lightPhoto sensor: silicon diodeCosine correction for angular incident lightSturdy protective cover for the photo sensorIncreased service life: Impact protection through a protective casingTrack function for continuous recording of variable environmental conditionsPeak Hold Mode to capture peaksSelectable measuring units: fc (foot-candle), lxAUTO-OFF functionDelivery in a robust box
Light measuring instrument SP
For measuring illumination of office and production workstations.Photo sensor: Silicon diode, filteredCosine correction for angular incident lightData-hold function, to freeze the current measurementRotating sensor unit (+ 90 and -180°) for optimum alignment to the light sourceTRACK function for continuous recording of variable environmental conditionsPeak Hold Mode to capture peaksSelectable measuring units: fc (foot-candle), lxBattery operationScope of supply:Light measuring instrument, soft box with light protection, 9 V block
Light measuring instrument testo 540
Quick and easy-to-use instrument for measuring lighting conditions in the workplace. The sensor is adapted to spectral sensitivity of the eye.Display illuminationHold-functionMax./min. valuesScope of supply: Meter incl. protection cap, batteries, calibration protocol
Lux meter testo 545
Compact meter for simple, fast, and precise measurement of illuminance (lux) of all common light sources according to the V-lambda curve to ensure productivity, performance, and health at workplaces. Measurement data can be transmitted to smartphones or tablets via Bluetooth®. The connection to the free testo Smart App enables configuration of the device as well as display, storage, and documentation of measurements.Wide range of applications due to LED compatibility (except single-colour blue LED)Acoustic alarm when limit values are exceededTime and point averagingQuick in-app configuration, graphic history, second screen, and measurement data memory in the testo Smart AppDisplay illuminationHold functionDisplay of min./max. valueDimensions probe (W x D x H): 54 x 134 x 23 mmCable length: 1.4 mScope of supply: Lux meter, transport bag, calibration protocol, batteries
Moisture meter HumidCheck Mini
Easy to use: remove protection cap, press measuring button and insert measuring electrodes in object.Scale for construction materials and woodAutomatic instrument testWith clipApplications:Used to measure the moisture level in sawn timber and construction materials. Suitable for field work.SpecificationsMeasuring principle:electrical resistanceMeasuring range wood:6 to 42%Accuracy wood:30% ±2%; 30% ±4%Measuring construction materials:0.2 to 2.0%Accuracy construction materials:1.4% ±0.1%; 1.4% ±0.2%Temperature range:0 to 40°C (32 to 104°F)Power supply.4 x coin cell (LR44)Housing:impact-resistant plasticDimensions:80 x 40 x 20mmWeight:80g (incl. packaging)