Bag for Half Masks
Carrying and Storage Bag for Half Masksoffers space for all common half masks and filtersstable, due to integrated support-boundwith shoulder strap and belt loopvery tough and washablewater resistance and dust proofvery light only 150g approx.
Blower Respiratory Protection Systems 3M™ Versaflo™, Sets
The belt-mounted blower units of the Versaflo™ series enable efficient work through long-life batteries, intelligent chargers and practical cleaning and storage kits.TR-800 Series is approved to Zone 0 requirements and so may be suitable for areas where potentially explosive atmospheres are expected and permanent in normal operations.Starter kits include all the essential system components you need to get started:Blower unit, battery, belt, charger and standard accessories.You can add the head section and other accessories depending on the area of application.
Bonnets for blower respiratory protection systems 3M™ Versaflo™.
The disposable lightweight bonnets have an integrated head holder and are ready for immediate use.
Escape respirator BLITZ 5
The maintenance-free, small Escape respirator against hazardous gases and vapors is characterised by quick and very easy donning, so that the user can leave a danger zone quickly and safely.Approval according to DIN 58647-7-ABEK 5Operation time of min. 5 minutesMouthpiece assembly with mouthpiece and nose clip for optimal tightness, also suitable for bearded and spectacle wearersHygienic plastic housing allows the transfer to different peopleIntegrated belt clipSmall size (80 x 80 x 60 mm) and low weight (approx. 170 g)With schematic procedure pictogramFilter with long shelf-life
Filter holder and coarse dust pre-filter for plug-in filters
Filter housing made of plastic, black, two-part, consisting of mount (upper part) and cover (lower part):Socket, approx. 105 mm outer diameter, 48 mm high, with standard thread (DIN EN 148-1) for connection to a mask,with rubber gasket behind the trapezoid internal thread. Covers each approx. 99 mm outer diameter,various heights cover 35 = 44 mm high, cover 70 = 62 mm high,each with trapezoidal male thread and pre-filter chamber with hinged coverFilter holder 5570/35 for filter series 19, 24, 25Filter holder 5570/70 for filters series 34, 39, 40, 45Prefilters trap coarse paint mist and dust and extend service life of particle and combination filtersUncomplicated filter change possible without disassembly from respirator mask
Filter mask X-plore®1700
Filter material CoolSAFE™ for protection against solid and liquid non-volatile particles. Odour versions with additional activated carbon layer against nuisance organic odours below the limit value.All versions meet the conditions of the EU guideline 89/686/EWG and are permitted as particle filtering half masks, in accordance with EN 149:2001. They already meet the increased requirements of the coming revision of EN 149:2001 + A1:2009 (test of filter performance for aerosol exposure with 120 mg paraffin oil). Australian Standard AS/NZS 1716:2003 certified (SAI Global).
Filtering facepiece Mandil
DIN EN 149:2009. Filtering half masks of the mandil range stand out owing to their low weight, innovative precast, low breathing resistance and high level of comfort (available with or without Cool Down exhalation valves). The innovative Cool Down valve is a one-way valve that offers easy exhalation for cool, dry comfort. The foamlined nose area with flexible nose clip enables the mask to fit tightly yet comfortably on the skin.Filtering facepiece Mandil FFP1protection against fine inert particles up to 4.5 times the NPF valueFiltering facepiece Mandil FFP2protection against slightly toxic and harmful particles up to 12.5 times the NPF valueFiltering facepiece Mandil FFP3protection against toxic and highly toxic particles up to 30 times the NPF valuecontinous adjustable harnessbroad cotton-lined inner sealing lip guarantees clos and comfort fit as well as safety
Filtering facepiece Mandil FFP2/Combi/V
Nuisance odour filtering facepiece Mandil FFP2/Combi/Vprotection against slightly toxic and harmful particles as well as unpleasant organic odours up to 12.5 times the NPF valueactivated charcoal layer included
Filters for half mask polimask 230
Gas FilterProtection against harmful gases and vapours, but they do not protect against particles and aerosolsParticle FilterProtection against harmful particles and aerosol, but they do not protect against gasesCombined Filter Protection against harmful gases, particles and aerosols
Filters for polimask BETA half masks
Gas Filter Protection against harmful gases and vapours, but they do not protect against particles and aerosolsParticle FilterProtection against harmful particles and aerosol, but they do not protect against gasesCombined Filter Protection against harmful gases, particles and aerosols
Fine Dust Filtering Half Mask silv-Air High Performance
FFP 3 - climatec half-mask High Performance with triple cavity systemtriple cavity system for maximum filter performance with lowest breathing resistanceextended operation because of the larger filter surface incorporating two additional cavitieseffective regulation of the temperature in the mask by climatec - comfort innovative, shape-optimised designhighest safety (certified according EN149 safety-level FFP3)anatomical design and soft-compound edges avoid bruising to the faceeasy to differentiate by colour coding (black - FFP3)compatible with safety spectacles because of the optimised nosebridgecirculatory venting via the soft-compound edges prevents fogging of safety spectaclesseamless, continuous headband for comfortable and secure mask fitflexible textile headband with neck clip for individual adjustment
Gas filter
Easy to operate filter system provides effective respiratory protection through simple assembly of the various filter modules.Gas filter SR are designed for use with Sundström half masks and full face masks.The gas filter can easily be combined with particle filter SR in order to obtain protection also against aerosols (particles), e.g. during spray painting.
Half face mask BariMask HF
BariMask HF with round thread connection Rd40 – this thread enables a much simpler user application test (“ball of the thumb test“). The innovative “Quick-Lock”connection of the neck strap makes it easy to put on the half face mask and therefore quicker to use.Corresponds to standard EN 140:1998With round thread connection Rd 40 according to DIN EN 148-1One inhalation valve and two side exhalation valvesMagnetic buckle on the neck strapRolling straps with adjustable strap slidersSafe identification and okumentation due to integrated RFID transponder
Half Mask Polimask 330
with standard thread connection acc. to DIN EN 148-1mask body with exhalation valve and chin supportmade of soft EPDMespecially suitable for use over prescription spectaclesthe connector allows the half mask to be used with screw filters up to 300g, pressure hose devices and turbo unit respiratory systems
Half Mask Series 6000
Economical and easy to wear. The 3M™ 6000 Series half masks have a good price and performance ratio. They are low- maintenance, easy to handle and extremely lightweight . Available in 3 sizes.Extremely lightweight mask bodyUnobstructed view due to compact designDouble filter system for good weight distributionWide range of filters for a variety of usesCompatible with 3M ™ gogglesPlease order matching filters separately.
Half Mask Series 6500QL
The 3M™ Rugged Comfort Half Facepiece Reusable Respirator is designed with tough and dirty worksites in mind. Stay productive and protected - the 6500QL Series delivers comfort, durability and stability with a firm, lightly textured silicone faceseal and strong body construction.Optimum fit and comfort with three-size adjustable head cradleBayonet Connection, Compatible with all bayonetstyle 3M™ cartridges and filtersOvermolded/Low-Profile DesignCool Flow™ ValveDirects exhaled breath and moisture downwardEasy positive pressure seal checkProvides comfort and stability with a soft but firm facesealQuick Latch - Drop-Down MechanismPlease order matching filters separately.
Half Mask Series 7500
The 3M ™ 7500 Series Half Masks are made of skin-friendly silicone and feature "Drop-down"-Ribbons. These encircling ribbons allow you to take off the mask easily in short breaks and leave it hanging in front of the chest instead of having to take it off completely ."Drop-Down" ribbonsElastic, adjustable ribbonsPatented 3M ™ Cool Flow ™ exhalation valvePerfect sealing fit by structured face sealingDouble filter system for reduced breathing resistance and good weight distributionWide range of spare parts and filters3 sizes - fitting for every face shapeCompatible with 3M ™ GogglesPlease order matching filter separately.
Half Mask SR 900, TPE
The half mask with excellent fit and high wearing comfort can be adapted to the requirements and needs of different workplaces. The possibility of separating the filter holder from the mask body allows the connection to other accessories.Low weightHigh protection through comfortable, secure sealing lipsElastic, easily adjustable straps and large headbandVery low inhalation and exhalation air resistanceIncl. Pre-filter holder, also suitable for function and leak-tightness testingPlease order matching filter separately.
Half mask X-plore® 4700
The Combitox Nova (tested to EN 140) is the universal half mask for use with gas, particle and combination filters.Advantages:Exact fit all shapes and sizes of faceHigh-quality and non-allergenic materials usedSimple to put on and remove, a pressure free and non-slip fitHigh security through sealing rim (similar to a full mask)Extensive range of filters for various usesFurther filters available on request.
Half Mask, DUETTA
Tested to EN 140 standards and certificated according to PPE guideline 89/686/EWG. With double filter connection. Plastic mask body with soft, sealing surface. Elastic adjustment straps with head gear.One mask size fits all face shapesExcellent field of vision, unrestricted freedom of movement and outstanding comfortSuperior balance through double filter technologyNon-allergenicOptimal sealing provided by newly designed sealing rimEasily dismantled for cleaning and maintenanceOne-piece headband for optimal fitSimple and secure filter attachment with bayonet connection
Half Mask, Polimask 230
filter connection special thread 95 mmbroad, supple inner sealing lips guarantee close fittingmade of soft EPDMspecial construction ensures a large field of vision and low breathing resistanceespecially suitable for use over prescription spectacles
Half mask, Polimask BETA
double filter half mask made of EPDM offering optimum protection during any type of activity2 inhalation valves minimise the inhalation resistance1 large exhalation valve ensures low exhalation resistancecomfortable head harness with neck clipby turning the filter holder it is possible to change the angle of vision or expand the field of visioncareful airflow routing allows use with spectacles