Pipette Fillers Profiller™ 447
Electronic pipette filler which allows longer and fatigue-free pipetting due to comfortable hand adjustment. Shape is ideal for working with glass or plastic pipettes. A powerful, quiet motor and a switch to set both aspiration and dispensing speeds enable maximal working efficiency even with large pipetting volumes.Powerful pump (fills 25 mL in 3 seconds)Comfortable finger triggersLow battery lightNiMH battery rechargeable during useInterchangeable protection membrane filterScope of delivery: Pipette filler Profiller™ 447, power supply, four plug adaptors (EU, US/JP, GB, AUS/NZ), two spare hydrophobic filters (0.45 µm and 0.2 µm), bench and wall stands and instruction manual.
Pipette Fillers S1
A lightweight, wireless pipette filler that allows longer and fatigue-free pipetting. For use with graduated and volumetric serological pipettes made of glass or plastic. Separate control of aspirating and dispensing speeds allows precise control of pipetting speeds and reduces the risk of overpipetting for smaller pipettes and volumes.Separate switches for aspiration and dispensingLarge backlit LCD display with indication of remaining battery life and speed settings8 speed levelsQuick charge function (fully charged after 3 hours)Individual labelling fieldSuitable for wall mounting or table standWith pipette adapter for the use of 1 ml pipettesScope of delivery: S1 pipette filler, universal charger, table stand, holder for wall mounting, 1 ml pipette tray, operating instructions and warranty card
Pipette holder Eppendorf
For pipette carousel or wall mounting, incl. adhesive tape, without charging function.
Pipette holder for multichannel pipettes, GFP/Hastelloy C
Space-saving pipette holder for 8- or 12-channel pipettes.
Pipette holder SINGLE™, PC
For holding a single or multichannel PIPETMAN® pipette. The pipette holder adheres strongly to any smooth, dry surface or may be fastened with screws.
Pipette Leak Testing Unit
Improved process reliability with functional validation of air-displacement pipettes.The most frequent cause of inaccuracy in piston-operated pipettes is leakage. This arises from damage either to the seals, pistons or tip cones. Often not detectable by the naked eye, leaks lead to significant volume errors.The BRAND pipette leak tester (PLT unit) for air displacement pipettes finds even the smallest leaks within seconds.Limit values for the commercially available single- and multichannel pipettes in the volume range 1µl to 10ml are pre-programmed.Testing with and without tips Test results in secondsPatent pendingAccording to monitoring of measuring instruments, air-displacement pipettes must be checked at regular intervals and the results must be compared with the ISO 8655-2 error limits. However, a calibration certificate only reflects the results at the time of testing. The time between these calibrations is crucial, since leaks can occur at any time. Well over 80% of pipettes sent in for repair have leaks and are outside their volume tolerances, even if they don't drip.While the PLT unit cannot replace regular gravimetric testing, daily pipette checks can provide a safeguard during the periods between calibrations. Even the smallest leaks are detected. Process reliability for the pipettes is thus significantly improved.Items supplied:PLT unit (Pipette Leak Testing Unit) including one adapter each for testing air-displacement pipettes with tip (mounted) and without tip, 2 plugs, 3 replacement PE filters for the pipette adapters, universal AC adapter, quality certificate and operating manual.
Pipette reservoirs, PP
These reagent reservoirs were designed especially for use with automated liquid handling platforms. They can also be used with manual systems. Different partitions, bottom styles and profiles provide broas application flexibility.ANSI/SLAS standard format Compatible with nearly all liquid handling robots and other automated dispensing systemsDifferent types for use with multichannel pipettes and automatic systemsExcellent stability and chemical resistance made from high-quality polypropyleneFree from RNases and DNases, autoclavable (121 °C, 20 min)
Pipette rinser system
For easy and gentle cleaning of pipettes according to the suction lifter principle. A complete rinsing system consists of pipette washer, pipette soaking jar and pipette basket, please order separately. Heat resistant up to 105 °C, good chemical resistance.Pipette basket: For holding pipettes up to 600 mm or burettes acc. to Mohr. The basket is equipped with a handle and a height-adjustable ring. The bottom of elastic PE reduces the risk of damage to the pipettes.Pipette soaking jar: For pre-cleaning of the pipettesPipette rinser: For rinsing the pre-cleaned pipettes. The emptying siphon permits constant water exchange. The water inlet should be approx. 2 l/min.*with handle
Pipette stand for electronic single and multichannel microliter pipettes E1-ClipTip™
With universal power supply.
Pipette stand for Finnpipette™
Pipette stands, grey, made of two solid supports and an aluminum crossbar for 3 or 6 single-channel pipettes.Can also be used for multi-channel pipettes.
Pipette stand for Multichannel microliter pipettes
Multichannel Pipette Stand, 1 position.
Pipette stand for multichannel microliter pipettes Finnpipette™ Novus
For Thermo Scientific Finnpipette™ Novus pipettes.
Pipette stand for single and multichannel microliter pipettes F1 / F2
Provide safe and convenient storage for manual and electronic pipettes using.
Pipette stand for Single and Multichannel microliter pipettes, for Calibra® and Acura® models
Innovative design fits all Calibra® and Acura® models. Easy reach of each instrument. Heavy base plate and anti-slip pads guarantee high stability. Polyamide construction.
Pipette stand Universal for single and multi-channel microliter pipettes
Holds up to 8 single-channel, 4 multi-channel, or a combination of both pipettes.For all pipette brandsInserts on the upper holders can be added or removed to accommodate the fit of different pipette widthsWeighted base allows for easy one-handed removal or replacement of pipettesPipettes are held in a vertical position to help prevent contaminationAssorted color options allow for color coding pipette locationDimensions (W x H): 229 x 408 mm
Pipette stand, horizontal, PP
Pipette stand for 12 pipettes, horizontal is made from moulded polypropylene which is autoclavable. On each side, 6 pipettes (longer than 22 cm) can be stored horizontally. Easy to clean.
Pipette stand, PS
Manufactured from polystyrene for easy organisation of all kinds of pipettes. Cranated design enables safe holding of large size pipettes in longitudinal direction and short size pipettes in transverse direction. Can also be used in drawers as well as on bench tops.
Pipette stand, vertical, PP
The pipette carousel can be rotated 360° and can hold up to 94 pipettes. The pipettes are placed vertically in the stand. The base plate has a raised edge which catches dripping liquids.
Pipette stands Flip & Grip™ for single and multi-channel microliter pipettes
Unique pipette holder that gives you the option of using on the bench top, or hanging under shelf holder to help maximize your working space available.Will hold up to 12 single channel pipette, or a combo of 3 single and 3 multichannelHolds most common brands. Rubber grips prevent scratching pipetteHolder rotates for easy pipette selection and storageWeighted base. Fixing screw provided for under shelf optionDimensions (W x H): 193 x 332mm (bench top style); 193 x 187mm (under shelf style)