Measuring Cylinders, PP, Tall Form, Class B, Moulded Graduations
Conforms to ISO 6706 - 1981 (E), high transparency. Autoclavable at 121 °C for 20 min., permanently heat resistant up to 100 °C. Durable, moulded graduation. Inner surface with very low wettability, therefore no meniscus formation. Food safe.
Measuring cylinders, PP, tall form, class B, moulded graduations
Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.They offer high transperency, chemical resistance and remarkable heat tolerance.They meet the highest quality standards according to DIN 12681 and ISO 6706.Individually calibrated through automatic calibration process carried out by robots.Permanent quality control through all steps eliminate possible deviations from nominal values.Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class "B" standards.Graduations are embossed and specially designed for plastic and resistant to 60°C.For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60°C and should not be kept under direct sunlight or overheated conditions.
Measuring cylinders, PP, tall form, class B, moulded graduations
Tall form. Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Measuring cylinders, PP, with handle, moulded graduations
The large handle provides a secure grip for safer, more controlled and convenient pouring. A double scale is accurate and easy to read. The wide hexagonal base prevents tip over and rolling on the benchtop. One litre and two litre sizes.Autoclavable at 121°C
Measuring cylinders, SAN, low form, class B, moulded graduations
Short form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Measuring cylinders, SAN, tall form, class B, moulded graduations
Tall form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Class B tolerances according to DIN 12681/ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Measuring Flask, DURAN®, Class A, Blue Graduation, PE Stopper, USP
Measuring flask, class A, DURAN®, blue graduation, USP, with dated batch identification, standard ground and PE stopper. Additional USP batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com.
Measuring Flask, DURAN®, Class A, Blue Graduation, without Stopper
Certified conformity, with dated batch identification, standard ground, without stopper, calibrated for IN, DIN EN ISO 1042. Additional batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com.
Measuring pipette, serology, AR®-glass, class B
Durable graduation with brown silver diffusion ink, wide opening. For serology. Graduation marks, with expanded tip opening, zero point at top, graduated to tip. With standard cotton plug from 5 ml.
Measuring pipette, Soda-lime glass, class AS, brown graduation, type 1
Calibrated for EX. Durable gradution with silver diffusion ink, certified conformity, with dated batch identification. Main point ring graduation, not graduated to tip (partial delivery). With standard cotton plug from 5 ml, zero point at top, type 3, DIN EN ISO 835. Additional batch certificates can be generated and printed at any time free of charge at the manufacturer's website.
Micro burettes acc. to Bang, DURAN®, class AS, certified conformity, with glass key
Blue graduated, with dated batch identification. Straight stopcock and stopcock on filling tube with standard ground glass key. Schellbach stripe for enhanced legibility, main point ring graduation. Calibrated for EX, DIN EN ISO 385.Additional batch certificates can be generated and printed at any time free of charge on the manufacturer's website.
Micro burettes acc. to Bang, DURAN®, class AS, certified conformity, with PTFE key
Blue graduated, with dated batch identification. Straight stopcock and stopcock on filling tube with PTFE key. Schellbach stripe for enhanced legibility, main point ring graduation. Calibrated for EX, DIN EN ISO 385.Additional batch certificates can be generated and printed at any time free of charge on the manufacturer's website.
Micro burettes acc. to Bang, DURAN®, class AS, with stand
Blue graduated, certified conformity, with dated batch identification. With stand. Straight stopcock and stopcock on filling tube with standard ground glass key. Schellbach stripe for enhanced legibility, main point ring graduation. Calibrated for EX, DIN EN ISO 385.Additional batch certificates can be generated and printed at any time free of charge on the manufacturer's website.
Micro burettes, Bang pattern, borosilicate glass 3.3, Class AS, with DAkkS calibration certificate
All Blaubrand® burettes are supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate or USP individual certificate. Batch and individual certificates can also be downloaded at the supplier's website.BLAUBRAND®Straight stopcockDE-M markingDIN EN ISO 385Calibrated to deliver (TD, EX)Schellbach stripeNeedle valve stopcock with PTFE spindle (PTFE key in intermediate stopcock)
Micro burettes, Bang pattern, borosilicate glass 3.3, class AS, with lateral valve stopcock
All Blaubrand® burettes are delivered with batch number and one batch certificate included per manufacturer's pack. Also available with individual works, USP or DAkkS calibration certificate on request.DE-M markingDIN EN ISO 385Calibrated to deliver (TD, EX)Schellbach stripeWith PTFE spindle (PTFE key in intermediate stopcock)
Micro burettes, Bang pattern, borosilicate glass 3.3, class AS, with straight needle valve stopcock
All Blaubrand® burettes are delivered with batch number and one batch certificate included per manufacturer's pack. Also available with individual works, USP or DAkkS calibration certificate on request.DE-M markingDIN EN ISO 385Calibrated to deliver (TD, EX)Schellbach stripeWith PTFE spindle (PTFE key in intermediate stopcock)
Micro capillaries
These disposable micro capillaries fill automatically from end to end. Their accuracy is better than 1%. A capillary tube holder is supplied with each pack. Also contains a small bulb with aperture which can be inserted into capillary and used as an effective support for filling and emptying tubes.
Micro Dispenser piccolo 1 / 2, fixed volume
An innovative way of serial dispensing. New methods in the field of biochemical and medical research demand the dispensing of the smallest of volumes. With the VITLAB®piccolo 1 these volumes can be dispensed straight from the bottle, which makes it perfect for the dispensing of long series. Disposable tips are not necessary. Wide range of applications, since all parts in contact with the reagents are made from high-quality materials such as PTFE, FEP, borosilicate glass and platinum-iridium.Precise dispensingOne-hand operationLow weightDischarge tube can be rotated 360°piccolo 1: with one fixed volumepiccolo 2: with two fixed volumes (100/250 µl, 50/1000 µl, 1000/2000 µl)
Micro-haematocrit capillary tubes, heparinised
DIN ISO 12 772 and BS 4316-68 With red color codeFor use in microhaematocrit centrifugesThe entire inner surface is coated with sodium-heparinatFor capillary blood samplingCE marked according to guideline EU IVDR 2017/746
Microdispensers, adjustable, Acura® manual 865
Three models: 5 -1000 µLExcellent ergonomics, soft plunger activationLarge volume displayRevolving valve unitIntegrated user calibration systemVersatile feeding through bottle, tubing or syringeNo need for consumablesAutoclavable fully assembled at 121°C / 250°FThree-year warranty
Microhaematocrit capillary tubes, Non-heparinised
Disposable capillaries for centrifugation of blood samples.With colour codeLength 75 mm ± 0.5 mmIn compliance with DIN ISO 12772For in-vitro diagnostic applications acc. to IVD directive 98/79/EG
Microhaematocrit capillary tubes, Sodium-heparinised
Disposable capillaries for centrifugation of blood samples.With colour codeLength 75 mm ± 0.5 mmIn compliance with DIN ISO 12772For in-vitro diagnostic applications acc. to IVD directive 98/79/EG